Analysis of vibration correction performance of vibration sensor for absolute gravity measurement

doi:10.7498/aps.70.20211686

Abstract
Absolute gravity measurement refers to measurement of the absolute value of gravitational acceleration (g, approximately 9.8 m/s2). The precision of absolute gravity measurement is mainly limited by vibration noises. Vibration correction is a simple and feasible way to deal with vibration noises, which corrects the measurement results by detecting vibration noises with a sensor. At present, vibration correction performance of different sensors lacks systematic analysis and evaluation. In this paper, theoretical analysis is carried out on how the sensor characteristics affect the correction performance. The vibration correction performances of three sensors, two different seismometers and one accelerometer, are evaluated by experiments under three cases with different vibration noises. The experimental results show that the correction precision obtained by using low-noise seismometer is mainly limited by its bandwidth and range. In case I with quiet environment, the standard deviation of corrected results obtained by using both seismometers can reach tens of μGal (1 μGal = 10?8 m/s2), which is close to that obtained by using an ultra-low-frequency vibration isolator. However, in case II with noisy environment, the standard deviation of corrected results obtained by both seismometers increase to hundreds of μGal due to the enhancement of high-frequency vibration components. This means the correction performance of both seismometers deteriorate, and the performance of seismometer with narrower bandwidth deteriorates more. Moreover, two seismometers cannot even work in case III with stronger vibration noises due to the range limitation. On the other hand, the correction precision obtained by using accelerometer is mainly affected by its resolution which is on the order of mGal (1mGal = 10?5 m/s2). Its bandwidth can reach hundreds of or even thousands of hertz and its range is generally over ±2 g, which are large enough to meet the needs for noisy and dynamic applications. In case I with quiet environment, the standard deviation after correction with accelerometer is larger than that before correction. This is because the intensity of vibration noises in this case is close to or even smaller than the self-noise of accelerometer so that it could not be detected effectively by accelerometer. In case II with noisy environment, the resolution of accelerometer is sufficient to detect the vibration noises effectively. The standard deviation of the results is reduced from 2822 μGal to 1374 μGal after correction with accelerometer, equal to a precision of 0.1 mGal after 100 drops. In case III where the amplitude of vibration noise is up to 0.1 m/s2 and seismometer cannot work, accelerometer could still achieve a precision of 0.3 mGal after 100 drops. The systematic deviation is corrected from ?1158 mGal to ?285 μGal and the standard deviation is reduced from 34 mGal to 3.3 mGal. Therefore, the low-noise seismometer is more suitable for vibration correction in a quiet environment with stable foundation, which could realize a standard deviation superior to hundreds of μGal. While the accelerometer is more appropriate for vibration correction in a complex or dynamic environment, which could achieve a standard deviation of mGal-level. Finally, according to the results and analysis, a theoretical guidance for the selection and design of sensors in vibration correction applications is provided.

Keywords:
Absolute gravity measurement /

Vibration correction /

Vibration sensor
FullText HTML

Cited By

[1]	ZHAI Chenjie, WANG Jing, ZHOU Junjie, WANG Yu, TANG Xiaoming, ZHOU Yin, ZHANG Can, LI Rui, SHU Qing, WANG Kainan, WANG Shuangquan, JIN Zixing, HUA Shan, SUN Yiren, WANG Zhenghao, MA Zhixiang, CAI Minghao, WANG Xiaolong, WU Bin, LIN Qiang. Airborne absolute gravity measurements based on quantum gravimeter. Acta Physica Sinica, doi: 10.7498/aps.74.20241621
[2]	YU Huifen, QI He, TU Xiaoniu, ZHANG Haibo, CHEN Dali, WU Jie, CHEN Jun. Research progress of high-temperature piezoelectric vibration sensors and piezoelectric materials. Acta Physica Sinica, doi: 10.7498/aps.74.20240906
[3]	Li Jian-Yu, Dong Zhong-Ji, Zhang Ji-Hong, Shi Wen-Hui, Zheng Jia-Jin, Wei Wei. Temperature-independent multi-parameter sensor based on polarization maintaining fiber Bragg grating. Acta Physica Sinica, doi: 10.7498/aps.72.20230478
[4]	Che Hao, Li An, Fang Jie, Ge Gui-Guo, Gao Wei, Zhang Ya, Liu Chao, Xu Jiang-Ning, Chang Lu-Bin, Huang Chun-Fu, Gong Wen-Bin, Li Dong-Yi, Chen Xi, Qin Fang-Jun. Ship-borne dynamic absolute gravity measurement based on cold atom gravimeter. Acta Physica Sinica, doi: 10.7498/aps.71.20220113
[5]	Yao Jia-Min, Zhuang Wei, Feng Jin-Yang, Wang Qi-Yu, Zhao Yang, Wang Shao-Kai, Wu Shu-Qing, Li Tian-Chu. A coefficient searching based vibration correction method. Acta Physica Sinica, doi: 10.7498/aps.71.20220037
[6]	Cheng Bing, Chen Pei-Jun, Zhou Yin, Wang Kai-Nan, Zhu Dong, Chu Li, Weng Kan-Xing, Wang He-Lin, Peng Shu-Ping, Wang Xiao-Long, Wu Bin, Lin Qiang. Experiment on dynamic absolute gravity measurement based on cold atom gravimeter. Acta Physica Sinica, doi: 10.7498/aps.71.20211449
[7]	Zhu Dong, Xu Han, Zhou Yin, Wu Bin, Cheng Bing, Wang Kai-Nan, Chen Pei-Jun, Gao Shi-Teng, Weng Kan-Xing, Wang He-Lin, Peng Shu-Ping, Qiao Zhong-Kun, Wang Xiao-Long, Lin Qiang. Data processing of shipborne absolute gravity measurement based on extended Kalman filter algorithm. Acta Physica Sinica, doi: 10.7498/aps.71.20220071
[8]	Wen Yi, Wu Kang, Wang Li-Jun. Analysis of vibration correction performance of vibration sensor for absolute gravity measurement. Acta Physica Sinica, doi: 10.7498/aps.71.20211686
[9]	Sun Jia-Cheng, Wang Ting-Ting, Dai Yang, Chang Jian-Hua, Ke Wei. Multi-parameter measurement sensor based on no-core fiber. Acta Physica Sinica, doi: 10.7498/aps.70.20201474
[10]	Yao Jia-Min, Zhuang Wei, Feng Jin-Yang, Wang Qi-Yu, Zhao Yang, Wang Shao-Kai, Wu Shu-Qing, Li Tian-Chu. Effect of vibration noise with fixed phase on absolute gravimetry applying vibration isolator. Acta Physica Sinica, doi: 10.7498/aps.70.20210884
[11]	. Experiment and study on absolute gravity dynamic motion measurement based on cold atom gravimete. Acta Physica Sinica, doi: 10.7498/aps.70.20211449
[12]	Cheng Bing, Zhou Yin, Chen Pei-Jun, Zhang Kai-Jun, Zhu Dong, Wang Kai-Nan, Weng Kan-Xing, Wang He-Lin, Peng Shu-Ping, Wang Xiao-Long, Wu Bin, Lin Qiang. Absolute gravity measurement based on atomic gravimeter under mooring state of a ship. Acta Physica Sinica, doi: 10.7498/aps.70.20201522
[13]	Ma Tian-Bing, Zi Bao-Wei, Guo Yong-Cun, Ling Liu-Yi, Huang You-Rui, Jia Xiao-Fen. Distributed optical fiber temperature sensor based on self-compensation of fitting attenuation difference. Acta Physica Sinica, doi: 10.7498/aps.69.20191456
[14]	Wu Bin, Zhou Yin, Cheng Bing, Zhu Dong, Wang Kai-Nan, Zhu Xin-Xin, Chen Pei-Jun, Weng Kan-Xing, Yang Qiu-Hai, Lin Jia-Hong, Zhang Kai-Jun, Wang He-Lin, Lin Qiang. Static measurement of absolute gravity in truck based on atomic gravimeter. Acta Physica Sinica, doi: 10.7498/aps.69.20191765
[15]	Wu Bin, Cheng Bing, Fu Zhi-Jie, Zhu Dong, Wu Li-Ming, Wang Kai-Nan, Wang He-Lin, Wang Zhao-Ying, Wang Xiao-Long, Lin Qiang. Influence of Raman laser sidebands effect on the measurement accuracy of cold atom gravimeter. Acta Physica Sinica, doi: 10.7498/aps.68.20190581
[16]	Wu Bin, Cheng Bing, Fu Zhi-Jie, Zhu Dong, Zhou Yin, Weng Kan-Xing, Wang Xiao-Long, Lin Qiang. Measurement of absolute gravity based on cold atom gravimeter at large tilt angle. Acta Physica Sinica, doi: 10.7498/aps.67.20181121
[17]	Li Xin, Wang Lu-Na, Guo Shi-Liang, Li Zhi-Quan, Yang Ming. Doubled temperature measurement range for a single micro-ring sensor. Acta Physica Sinica, doi: 10.7498/aps.63.154209
[18]	Hu Hua, Wu Kang, Shen Lei, Li Gang, Wang Li-Jun. A new high precision absolute gravimeter. Acta Physica Sinica, doi: 10.7498/aps.61.099101
[19]	Guo Bang-Hong, Lu Yi-Qun, Wang Fa-Qiang, Zhao Feng, Hu Min, Lin Yi-Man, Liao Chang-Jun, Liu Song-Hao. Real-time low-frequency vibration phase drift tracking and auto-compensation in phase-coded quantum key distribution system. Acta Physica Sinica, doi: 10.7498/aps.56.3695
[20]	Yu A-Long. Research on the amplitude frequency characteristics compensation based on wavelet neural network for vibration velocity transducer. Acta Physica Sinica, doi: 10.7498/aps.56.3166

Metrics

Abstract views: 2915
PDF Downloads: 23
Cited By: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

Search

Article

留言板

Analysis of vibration correction performance of vibration sensor for absolute gravity measurement

Abstract

FullText HTML

Cited By

Metrics

Authors

Referees

About Journal

About

Search

Article

留言板

Analysis of vibration correction performance of vibration sensor for absolute gravity measurement

Abstract

FullText HTML

Cited By

Metrics

Publishing process

Authors

Referees

About Journal

About