-
With the development of multispectral common-aperture high-precision detection technology, the asymmetric double-sided off-axis aspheric mirror is playing an increasingly important role in characterizing the correcting phase difference, increasing the relative caliber of system, expanding the view angle of field, simplifying system structure, and reducing weight and volume. But high-precision detection is a key step restricting the applications of these mirrors. At present, the compensation method of the interference test is the most effective mean of off-axis aspheric surface detection which has a simple structure, large compensation range, small number of components and is easy to control. However for the detection of asymmetric double-sided off-axis aspheric mirrors, two sets of alone compensators are still used, in which the efficiency is low and the switching compensator will reduce the accuracy of detection. Aiming at this problem, in this paper we propose a zoom null compensation method which is based on the Offner refracting compensation method. In this method, the off-axis aperture stop causes the light to be off-axis and split, the common lens group is moved to zoom, and the mirror folds the light path. There are two off-axis apertures are provided for off-axis and splitting, four lenses which form three lens groups are used to move positions for zooming, two mirrors are used to fold light. An optical design software is used to simulate the experiment, and implements the design for the high-precision detection of optical path for the asymmetric double-sided off-axis aspherical mirror by using this set of null compensation method. The simulation result shows that the theoretical residual wave aberration increases up to 0.0003λ root-mean-square (RMS) and 0.0001λ RMS with the designed system compensation, which meet the requirement for detection. At the same time, the tolerance analysis is carried out according to the design result, the actual residual wave aberrations within the existing tolerance range are 0.0326λ RMS and 0.0316λ RMS, which meet the requirements for manufacturing and assembly. The present work provides a new idea for the high-precision detection of asymmetric double-sided off-axis aspheric mirror. At the same time, the quality of the detected beam in this paper is achieved under ideal conditions, and the quality of beam will be considered in the next research work.
-
Keywords:
- asymmetric double-sided off-axis aspheric surface /
- mirror detection /
- null compensation /
- optical design
[1] 潘君骅 2000 中国工程科学 2 32
Google Scholar
Pan J H 2000 Eng. Sci. 2 32
Google Scholar
[2] Forbes G W 2007 Opt. Express 15 5218
Google Scholar
[3] 龚大鹏 2015 博士学位论文 (长春: 中国科学院长春光学精密机械与物理研究所)
[4] Fappani D, Ducollet H 2007 Proc. SPIE 6687 66870T
[5] 张佩钰 2015 硕士学位论文 (西安: 西安电子科技大学)
Zhang P Y 2015 M.S. Thesis (Xi'an: Xidian University) (in Chinese)
[6] 师途, 杨甬英, 张磊, 刘东 2014 中国光学 7 26
Shi T, Yang Y Y, Zhang L, Liu D 2014 Chin. Opt. 7 26
[7] 王孝坤 2014 红外与激光工程 43 2959
Google Scholar
Wang X K 2014 Infrared Laser Eng. 43 2959
Google Scholar
[8] Km S W, Walker D, Brooks D 2003 Mechatronics 13 295
Google Scholar
[9] Weckenmann A, Estler T, Peggs G, McMurtry D 2004 CIRP Ann. 53 657
Google Scholar
[10] Yellowhair J, Burge J H 2008 Opt. Eng. 47 023604
Google Scholar
[11] 沃伦J. 史密斯 著 (周海宪, 程云芳 译)2011 现代光学工程 (北京: 化学工业出版社) 第536−541页
Smith W J (translated by Zhou H X, Cheng Y F) 2011 Modern Optical Engineering (Beijing: Chemical Industry Press) pp 536−541 (in Chinese)
[12] Nuñez-Alfonso J M, Cordero-Dávila A, Vergara-Limon S, Cuautle-Cortes J 2001 Appl. Opt. 40 501
Google Scholar
[13] 姜文汉, 鲜浩, 杨泽平, 姜凌涛, 饶学军, 许冰 1988 量子电子学报 15 228
Jiang W H, Xian H, Yang Z P, Jiang L T, Rao X J, Xu B 1988 Chin. J. Quantum Electron. 15 228
[14] 王孝坤 2012 光子学报 41 379
Wang X K 2012 Acta Photonics Sin. 41 379
[15] Burge J H 1993 Ph. D. Dissertation (Tucson: University of Arizona)
[16] Burge J H, Kot L B, Martin H M, Zhao C, Zobrist T 2006 Proc. SPIE 6273 62732T
Google Scholar
[17] 潘君骅 2004 光学与光电技术 2 1
Google Scholar
Pan J H 2004 Opt. Optoelectronics Technol. 2 1
Google Scholar
[18] 陈钦芳 2011 博士学位论文 (西安: 中国科学院西安光学精密机械研究所)
[19] 常军, 张正慧, 王蕊瑞 2011 60 034218
Google Scholar
Chang J, Zhang Z H, Wang R R 2011 Acta Phys. Sin. 60 034218
Google Scholar
[20] 苏定强, 羿美良 1985 天体 5 158
Su D Q, Yi M L 1985 Acta Astrophysics Sin. 5 158 (in Chinese)
[21] 张金平 2012 博士学位论文 (长春: 中国科学院长春光学精密机械与物理研究所)
Zhang J P 2012 Ph. D. Dissertation (Changchun: Changchun Institute of Optics, Fine Mechanics and Physic, Chinese Academy of Sciences)(in Chinese)
[22] 蔡立 2006 光学零件加工技术 (北京: 兵器工业出版社) 第234−299页
Cai L 2006 Optical Parts Processing Technology (Beijing: Weapon Industry Press) pp234−299 (in Chinese)
-
图 1 非对称双面离轴非球面反射镜高精度检测系统示意图
Figure 1. Schematic diagram of high precision detection system for asymmetric double off-axis aspheric mirror.
图 2 变焦零位补偿装置结构光路图
Figure 2. Optical path figure of zoom null compensation device structure.
图 3 剩余波像差图和光程差曲线 (a)结构一; (b)结构二
Figure 3. Residual wave aberration map and optical path difference (OPD) aberration curves: (a) Zoom 1; (b) zoom 2.
图 4 零位补偿检测波像差公差分析结果图 (a)结构一; (b)结构二
Figure 4. Tolerance analysis results of null compensation detection RMS wave aberration: (a) Zoom 1; (b) zoom 2.
表 1 非对称双面离轴非球面反射镜面型参数
Table 1. Parameter of asymmetric double-sided off-axis aspheric mirror.
表面 A面 B面 表达形式 $x = \dfrac{c{y^2}}{1 \!+\! \sqrt {1{\rm{\! -\! }}\left( {k \!+\! 1} \right){c^2}{y^2}} } \!+\! A{y^4} \!+\! B{y^6} \!+\! C{y^8} \!+\! \cdots $ 曲率半径/mm –1000 –650 偏心量/mm 82.427 57.948 待检面口径/mm 56 39 二次曲面常数(K) –1.5 –3.0 4阶系数(A面) 8.39516×10–11 –9.24425×10–10 6阶系数(B面) 9.36208×10–17 8.12843×10–16 
DownLoad: CSV
表 2 补偿装置公差精度
Table 2. Tolerance precision of compensation device
公差项 公差最小值 公差项 公差最小值 曲率半径公差 0.025 mm 安装偏心公差 0.1 mm 厚度公差 0.15 mm 安装倾斜公差 20″ 表面不规则度公差 0.05λ 折射率公差 0.002 空气间隔公差 0.15 mm
DownLoad: CSV
-
[1] 潘君骅 2000 中国工程科学 2 32
Google Scholar
Pan J H 2000 Eng. Sci. 2 32
Google Scholar
[2] Forbes G W 2007 Opt. Express 15 5218
Google Scholar
[3] 龚大鹏 2015 博士学位论文 (长春: 中国科学院长春光学精密机械与物理研究所)
[4] Fappani D, Ducollet H 2007 Proc. SPIE 6687 66870T
[5] 张佩钰 2015 硕士学位论文 (西安: 西安电子科技大学)
Zhang P Y 2015 M.S. Thesis (Xi'an: Xidian University) (in Chinese)
[6] 师途, 杨甬英, 张磊, 刘东 2014 中国光学 7 26
Shi T, Yang Y Y, Zhang L, Liu D 2014 Chin. Opt. 7 26
[7] 王孝坤 2014 红外与激光工程 43 2959
Google Scholar
Wang X K 2014 Infrared Laser Eng. 43 2959
Google Scholar
[8] Km S W, Walker D, Brooks D 2003 Mechatronics 13 295
Google Scholar
[9] Weckenmann A, Estler T, Peggs G, McMurtry D 2004 CIRP Ann. 53 657
Google Scholar
[10] Yellowhair J, Burge J H 2008 Opt. Eng. 47 023604
Google Scholar
[11] 沃伦J. 史密斯 著 (周海宪, 程云芳 译)2011 现代光学工程 (北京: 化学工业出版社) 第536−541页
Smith W J (translated by Zhou H X, Cheng Y F) 2011 Modern Optical Engineering (Beijing: Chemical Industry Press) pp 536−541 (in Chinese)
[12] Nuñez-Alfonso J M, Cordero-Dávila A, Vergara-Limon S, Cuautle-Cortes J 2001 Appl. Opt. 40 501
Google Scholar
[13] 姜文汉, 鲜浩, 杨泽平, 姜凌涛, 饶学军, 许冰 1988 量子电子学报 15 228
Jiang W H, Xian H, Yang Z P, Jiang L T, Rao X J, Xu B 1988 Chin. J. Quantum Electron. 15 228
[14] 王孝坤 2012 光子学报 41 379
Wang X K 2012 Acta Photonics Sin. 41 379
[15] Burge J H 1993 Ph. D. Dissertation (Tucson: University of Arizona)
[16] Burge J H, Kot L B, Martin H M, Zhao C, Zobrist T 2006 Proc. SPIE 6273 62732T
Google Scholar
[17] 潘君骅 2004 光学与光电技术 2 1
Google Scholar
Pan J H 2004 Opt. Optoelectronics Technol. 2 1
Google Scholar
[18] 陈钦芳 2011 博士学位论文 (西安: 中国科学院西安光学精密机械研究所)
[19] 常军, 张正慧, 王蕊瑞 2011 60 034218
Google Scholar
Chang J, Zhang Z H, Wang R R 2011 Acta Phys. Sin. 60 034218
Google Scholar
[20] 苏定强, 羿美良 1985 天体 5 158
Su D Q, Yi M L 1985 Acta Astrophysics Sin. 5 158 (in Chinese)
[21] 张金平 2012 博士学位论文 (长春: 中国科学院长春光学精密机械与物理研究所)
Zhang J P 2012 Ph. D. Dissertation (Changchun: Changchun Institute of Optics, Fine Mechanics and Physic, Chinese Academy of Sciences)(in Chinese)
[22] 蔡立 2006 光学零件加工技术 (北京: 兵器工业出版社) 第234−299页
Cai L 2006 Optical Parts Processing Technology (Beijing: Weapon Industry Press) pp234−299 (in Chinese)
DownLoad:
Catalog
Metrics
- Abstract views: 8981
- PDF Downloads: 59
- Cited By: 0
