Adopting PEABr additive to obtain efficient and stable carbon-based CsPbBr3 solar cells

doi:10.7498/aps.70.20211344

Abstract
In recent years, organic-inorganic hybrid perovskite solar cells have become a research hotspot in the photovoltaic field because of their excellent power conversion efficiency. However, this hybrid perovskite material's intrinsic instability and the harsh preparation environment limit its further commercial application. All-inorganic CsPbBr3 perovskite materials have attracted much attention because of their good stability, low cost and can be prepared in an atmospheric environment, showing great application potential. The controllable preparation and growth kinetics of CsPbBr3 materials need to be further studied, and the conversion efficiency of photovoltaic devices is still low. Considering the instability caused by traditional organic hole transport materials and their high preparation cost, this master dissertation focuses on systematically studies of CsPbBr3 all-inorganic perovskite cells without a hole transport layer as the research object. Growth kinetics materials of CsPbBr3 was directive by adding 2-phenylethylamine bromide to precursor solution. The main research contents and results are as follows: Based on multi-step spin-coating preparation of CsPbBr3 perovskite films. Study on the perovskite cell preparation method and the critical process parameters include the spin-coating PbBr2, amount and number of spin-coating of CsBr, substrate preheating temperature, and the annealing temperature are optimized. The optimization tests show that the optimum spin-coating of CsBr is five times and the spin-coating PbBr2 in the atmospheric environment. The optimal preheating temperature of the substrate is 80℃, and the optimal annealing temperature is 100℃. The perovskite films prepared under this condition are compact with a continuous high phase purity and good crystallization performance. The First adoption of PbBr2 in DMF and the addition of 2-phenylethylamine bromide (PEABr) solution to regulate the CsPbBr3 crystalline quality of the film. Effects of PEABr on the perovskite crystallization process and device performance are systematically investigated. The results show that the introduction of PEABr can effectively optimize CsPbBr3. The crystalline properties of the two-dimensional perovskite materials can improve the grain boundaries and improve their transport properties. The prepared perovskite solar cell with PEABr shows the highest power conversion efficiency of 8.25%, and it can maintain the efficiency of more than 90% when stored for 1500h under the condition of no encapsulation. Finally, stable, efficiency and low-cost all-inorganic CsPbBr3 solar cells without a hole layer are obtained.

Keywords:
Multi-step spin-coating method /

CsPbBr3 /

PEABr /

process optimization /

perovskite solar cells
FullText HTML : translate this paragraph

Cited By

[1]	Luo Pan, Li Xiang, Sun Xue-Yin, Tan Xiao-Hong, Luo Jun, Zhen Liang. Effect of electron irradiation on perovskite films and devices for novel space solar cells. Acta Physica Sinica, doi: 10.7498/aps.73.20231568
[2]	Zhang Xi-Sheng, Yan Chun-Yu, Hu Li-Na, Wang Jing-Zhou, Yao Chen-Zhong. Perovskite solar cells prepared by processing CsPbBr₃ nanocrystalline films in low temperature solution. Acta Physica Sinica, doi: 10.7498/aps.73.20241152
[3]	Wang Hui, Zheng De-Xu, Jiang Xiao, Cao Yue-Xian, Du Min-Yong, Wang Kai, Liu Sheng-Zhong, Zhang Chun-Fu. Fabrication of high-performance flexible perovskite solar cells based on synergistic passivation strategy. Acta Physica Sinica, doi: 10.7498/aps.73.20231846
[4]	Jin Cheng-Cheng, Ding Ling-Ling, Song Zi-Xin, Tao Hai-Jun. Improvement of performance of perovskite solar cells through BaTiO₃ doping regulated built-in electric field. Acta Physica Sinica, doi: 10.7498/aps.73.20231139
[5]	Li Pei, Xu Jie, He Chao-Hui, Liu Jia-Xin. Experimental study on irradiation of perovskite solar cells. Acta Physica Sinica, doi: 10.7498/aps.72.20230230
[6]	Zhu Yong-Qi, Liu Yu-Xue, Shi Yang, Wu Cong-Cong. High performance perovskite solar cells synthesized by dissolving FAPbI₃ single crystal. Acta Physica Sinica, doi: 10.7498/aps.72.20221461
[7]	Xue Bin-Tao, Zhang Li-Min, Liang Yong-Qi, Liu Ning, Wang Ding-Ping, Chen Liang, Wang Tie-Shan. Proton irradiation induced damage effects in CH₃NH₃PbI₃-based perovskite solar cells. Acta Physica Sinica, doi: 10.7498/aps.72.20222100
[8]	Yang Mei-Li, Zou Li, Cheng Jia-Jie, Wang Jia-Ming, Jiang Yu-Fan, Hao Hui-Ying, Xing Jie, Liu Hao, Fan Zhen-Jun, Dong Jing-Jing. Improvement of performance of CsPbBr₃ perovskite solar cells by polyvinylidene fluoride additive. Acta Physica Sinica, doi: 10.7498/aps.72.20230636
[9]	Wang Cheng-Lin, Zhang Zuo-Lin, Zhu Yun-Fei, Zhao Xue-Fan, Song Hong-Wei, Chen Cong. Progress of defect and defect passivation in perovskite solar cells. Acta Physica Sinica, doi: 10.7498/aps.71.20220359
[10]	Zhou Yang, Ren Xin-Gang, Yan Ye-Qiang, Ren Hao, Du Hong-Mei, Cai Xue-Yuan, Huang Zhi-Xiang. Physical mechanism of perovskite solar cell based on double electron transport layer. Acta Physica Sinica, doi: 10.7498/aps.71.20220725
[11]	Ma Shu-Peng, Lin Fei-Yu, Luo Yuan, Zhu Liu, Guo Xue-Yi, Yang Ying. Formation mechanism of CsPbBr₃ in multi-step spin-coating process. Acta Physica Sinica, doi: 10.7498/aps.71.20220171
[12]	Zhong Ting-Ting, Zhang Chen, Shindume Lomboleni Hamukwaya, Xu Wang-Shu, Tang Kun-Peng, Xu Xiang, Sun Wen-Tian, Hao Hui-Ying, Dong Jing-Jing, Liu Hao, Xing Jie. Efficient and stable carbon-based CsPbBr₃ solar cells added with PEABr additive. Acta Physica Sinica, doi: 10.7498/aps.71.20211344
[13]	Wang Pei-Pei, Zhang Chen-Xi, Hu Li-Na, Li Shi-Qi, Ren Wei-Hua, Hao Yu-Ying. Research progress of inverted planar perovskite solar cells based on nickel oxide as hole transport layer. Acta Physica Sinica, doi: 10.7498/aps.70.20201896
[14]	Wang Yan-Bo, Cui Dan-Yu, Zhang Cai-Yi, Han Li-Yuan, Yang Xu-Dong. Recent advances in perovskite solar cells: Space potential and optoelectronic conversion mechanism. Acta Physica Sinica, doi: 10.7498/aps.68.20190569
[15]	Yang Ying-Guo, Yin Guang-Zhi, Feng Shang-Lei, Li Meng, Ji Geng-Wu, Song Fei, Wen Wen, Gao Xing-Yu. An in-situ real time study of the perovskite film micro-structural evolution in a humid environment by using synchrotron based characterization technique. Acta Physica Sinica, doi: 10.7498/aps.66.018401
[16]	Cao Ru-Nan, Xu Fei, Zhu Jia-Bin, Ge Sheng, Wang Wen-Zhen, Xu Hai-Tao, Xu Run, Wu Yang-Lin, Ma Zhong-Quan, Hong Feng, Jiang Zui-Min. Temperature-dependent time response characteristic of photovoltaic performance in planar heterojunction perovskite solar cell. Acta Physica Sinica, doi: 10.7498/aps.65.188801
[17]	Chai Lei, Zhong Min. Recent research progress in perovskite solar cells. Acta Physica Sinica, doi: 10.7498/aps.65.237902
[18]	Song Zhi-Hao, Wang Shi-Rong, Xiao Yin, Li Xiang-Gao. Progress of research on new hole transporting materials used in perovskite solar cells. Acta Physica Sinica, doi: 10.7498/aps.64.033301
[19]	Ting Hung-Kit, Ni Lu, Ma Sheng-Bo, Ma Ying-Zhuang, Xiao Li-Xin, Chen Zhi-Jian. progress in electron-transport materials in application of perovskite solar cells. Acta Physica Sinica, doi: 10.7498/aps.64.038802
[20]	Shi Jiang-Jian, Wei Hui-Yun, Zhu Li-Feng, Xu Xin, Xu Yu-Zhuan, Lü Song-Tao, Wu Hui-Jue, Luo Yan-Hong, Li Dong-Mei, Meng Qing-Bo. S-shaped current-voltage characteristics in perovskite solar cell. Acta Physica Sinica, doi: 10.7498/aps.64.038402

Metrics

Abstract views: 3579
PDF Downloads: 32
Cited By: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

Search

Article

留言板

Adopting PEABr additive to obtain efficient and stable carbon-based CsPbBr3 solar cells

Abstract

FullText HTML : translate this paragraph

Cited By

Metrics

Authors

Referees

About Journal

About

Search

Article

留言板

Adopting PEABr additive to obtain efficient and stable carbon-based CsPbBr3 solar cells

Abstract

FullText HTML : translate this paragraph

Cited By

Metrics

Publishing process

Authors

Referees

About Journal

About