-
A convective cooling platelet structure is a considered as thermal protection system to prevent the leading edge of airfoil from the serious aerodynamic heating. The cooling effect parameter is proposed in this paper. By the use of fluid structure interaction method, the cooling effect of convective cooling structure is investigated under given condition. The minimum that is 0.25 when the coolant is water occurs on the leading edge of airfoil head. The research shows that the increases with the increase of channel aspect radio () and reaches a stable value that indicates that the cooling effect is saturated. Situation unfavorable for cooling may occur if the keeps increasing. And the decreases with the radio of airfoil's head decreasing. With coolant flux increasing, the also increases to a stable value and the pressure drop between inlet and outlet increases rapidly when the structure and the material of the convective cooling platelet structure are fixed. Considering the pressure brought to the supply system due to the increase of flux, we should choose the optimal coolant flux value in order to obtain better cooling effect. Both the inner coolant groove and the external refractory protection should be of high thermal conductivity material which can strengthen the heat transfer of structure and enhance the cooling effect.
-
Keywords:
- convective cooled /
- leading edge of airfoil /
- aerodynamic heating /
- fluid structure
[1] Glass D E 2008 AIAA-2008-2682
[2] Swanson A D, Coghlan S C, Pratt D M, Paul D B 2007 AIAA-2007-1671
[3] Clay C. L. 2004 J. Aircraft 41 978
[4] SUN Z H 2008 Aero. Sci. Techn. 3 13(in Chinese) [孙兆虎 2008 航空科学技术 3 13]
[5] Helenbrook R G, Mcconarty W A, Anthony F M 1971 NASA CR-1917
[6] Helenbrook R G, Anthony F M 1971 NASA CR-1918
[7] Scotti J S 1991 NASA TP 3100
[8] Poon W S, Kanapady R, Mohan R V, Tamma K K 1995 AIAA-95-158-272
[9] Rakow J F, Waas A M, 2004 AIAA-2004-1710
[10] Rakow J F, Waas A M, 2007 AIAA-24813-731
[11] Zhang F 2008 Ph. D. Dissertation (Changsha: National University of Defense Technology) (in Chinese) [张峰 2008 博士学位论文 (长沙: 国防科技大学)]
[12] LI J W, LIU Y. 2005 J. Propulsion Techn. 26 111 (in Chinese) [李军伟, 刘玉 2005 推进技术 26 111]
[13] Tao W Q 2001 Numerical Heat Transfer (Xi' an: Xi' an Jiaotong University Press) p176 (in Chinese) [陶文铨 2001 数值传热学 (西安: 西安交通大学出版社)] 第176页
[14] Dechaumphi P, Thornton P E, Wieting A R 1989 AIAA-26055-793
-
[1] Glass D E 2008 AIAA-2008-2682
[2] Swanson A D, Coghlan S C, Pratt D M, Paul D B 2007 AIAA-2007-1671
[3] Clay C. L. 2004 J. Aircraft 41 978
[4] SUN Z H 2008 Aero. Sci. Techn. 3 13(in Chinese) [孙兆虎 2008 航空科学技术 3 13]
[5] Helenbrook R G, Mcconarty W A, Anthony F M 1971 NASA CR-1917
[6] Helenbrook R G, Anthony F M 1971 NASA CR-1918
[7] Scotti J S 1991 NASA TP 3100
[8] Poon W S, Kanapady R, Mohan R V, Tamma K K 1995 AIAA-95-158-272
[9] Rakow J F, Waas A M, 2004 AIAA-2004-1710
[10] Rakow J F, Waas A M, 2007 AIAA-24813-731
[11] Zhang F 2008 Ph. D. Dissertation (Changsha: National University of Defense Technology) (in Chinese) [张峰 2008 博士学位论文 (长沙: 国防科技大学)]
[12] LI J W, LIU Y. 2005 J. Propulsion Techn. 26 111 (in Chinese) [李军伟, 刘玉 2005 推进技术 26 111]
[13] Tao W Q 2001 Numerical Heat Transfer (Xi' an: Xi' an Jiaotong University Press) p176 (in Chinese) [陶文铨 2001 数值传热学 (西安: 西安交通大学出版社)] 第176页
[14] Dechaumphi P, Thornton P E, Wieting A R 1989 AIAA-26055-793
Catalog
Metrics
- Abstract views: 7627
- PDF Downloads: 797
- Cited By: 0
下载:
