-
It is an universal phenomenon that the dislocations are produced in metal plastic deformation, which will has a potential value in fundamental research field for metal strengthening and toughening if its evolution characteristics and laws are investigated. Therefore, this behavior of movable dislocation for metal Al is studied by atomic simulation, and the microscopic mechanism of metal strengthening and toughening are also revealed through studying the interaction between movable dislocation induced by nano-indentation and twin boundary. Furthermore, the movable dislocation features, and dislocation density, and hardness, and adhesive effect are analyzed, and the comparison between the single boundary height and the multilayer twin boundary height is conducted. It is found that the plastic deformation of aluminum mental can be dominant by coordinating the amorphous generation and hexagonal close-packed structure under high speed deformation. In the nano-indentation process, the twin boundary has two obvious effects on movable dislocation of moving changes: one is to hinder the dislocation from migrating, the other is to induce dislocation to produce a cell, which result in the dislocation entanglement and generation of cross slip, it is also the main reason why the metal has excellent mechanical properties of strengthening and toughening features. These results demonstrate that the local non-contact region on the surface of Al substrate can induce atomic mismatch spots to appear during loading, and when the distance between the twin boundary and the upper surface of the substrate decreases, the effects of dislocation winding and dislocation slip become more obvious, and the anti-adhesion effect also decreases. In addition, the twin boundary is treated as the propagation of plastic ring source in the dislocation emission process when substrate is continuously loaded. These results provide an important theoretical source for improving metal strengthening and toughening effect.
-
Keywords:
- nano-indentation /
- movable dislocation /
- molecular dynamics /
- strengthening and toughening /
- twin boundary /
- adhesive effect
[1] 翁盛槟, 陈晶晶, 周建强, 林晓亮 2021 表面技术 50 216
Weng S B, Chen J J, Zhou J Q, Lin X L 2021 Surf. Tech. 50 216
[2] Alhafez I A, Ruestes C J, Bringa E M, Urbassek H M J 2019 Alloys Compd. 803 618
Google Scholar
[3] Narayan J, Zhu Y T 2008 Appl. Phys. Lett. 92 151908
Google Scholar
[4] Jin Z H, Dunham S T, Gleiter H, Gumbschd P 2011 Scr. Mater 64 60
[5] Jiang Z, Liu X, Li G, Lian J 2006 Appl. Phys. Lett. 88 143115
Google Scholar
[6] Schwaiger R, Moser B, Dao M, Suresh S 2003 Acta Mater. 51 5159
Google Scholar
[7] Wang Y M, Hamza A V, Ma E 2006 Acta Mater. 54 2715
Google Scholar
[8] Wei Y J, Bower A F, Gao H J 2008 Acta Mater. 56 1741
Google Scholar
[9] Zhang K, Weertman J R, Eastman J A 2005 Appl. Phys. Lett. 87 061921
Google Scholar
[10] Gianola D S, Petegem S V, Legros M, Swygenhovenet H V, Hemker K J 2006 Acta Mater. 54 2253
Google Scholar
[11] Rajagopalan J, Han J H, Saif M T A 2007 Science 315 1831
Google Scholar
[12] Rajagopalan J, Han J H, Saif M T A 2008 Scr. Mater. 59 921
Google Scholar
[13] Li X Y, Wei Y J, Yang W, Gao H J 2009 PNAS 106 16108
Google Scholar
[14] 李晓雁 2014 金属学报 50 219
Li X Y 2014 Aata Metal. Sin. 50 219
[15] Frøseth A G, Derlet P M, Swygenhoven H V 2006 Scr. Mater. 54 477
[16] Cao F H, Wang Y J, Dai L H 2020 Acta Mater. 194 283
Google Scholar
[17] Lee S B, Vaid A, Im J, Kim B S, Prakashet A, Guénolé J L, Kiener D, Bitzek E 2020 Nat. Commun. 11 2367
Google Scholar
[18] Lai M, Zhang X D, Fang F Z 2013 Nanoscale Res. Lett. 8 353
Google Scholar
[19] Kizuka T 1998 Phys. Rev. B 57 11158
Google Scholar
[20] Zhang L F, Zhou H F, Qu S X 2012 Nanoscale Res. Lett. 7 1
Google Scholar
[21] Wang Z J, Li Q J, Li Y, Huang L C, Lu L, Dao M, Li J, Ma E, Suresh S, Shan Z W 2017 Nat. Commun. 1108 1
[22] Kou Z D, Yang Y Q, Yang L X 2018 Scr. Mater. 145 28
Google Scholar
[23] Yamakov V, Wolf D, Phillpot S R 2003 Acta Mater. 51 4135
Google Scholar
[24] Zhang M, Chen J, Xu T. J 2020 Appl. Phys. 127 125303
Google Scholar
[25] Liao X Z, Zhou F, Lavernia E J, Srinivasan S G, Baskes M L, He D W, Zhu Y T 2003 Appl. Phys. Lett. 83 632
Google Scholar
[26] Huang C, Peng X H, Yang B, Zhao Y B, Weng S Y, Fu T 2017 Nanomaterials 7 375
Google Scholar
[27] Gravell J D, Ryu I 2020 Acta Mater. 190 58
Google Scholar
[28] Xiang H G, Li H T, Fu T 2017 Acta Mater. 138 131
Google Scholar
[29] Cui Y H, Li H T, Xiang H G, Peng X H 2019 Appl. Surf. Sci. 466 757
Google Scholar
[30] Guo J, Chen J J, Wang Y Q 2020 Ceram. Int. 46 12686
Google Scholar
[31] Stukowski 2009 Model Simul. Mater. S C 18 015012
[32] Foiles S M, Baskes M I, Daw M S 1988 Phys. Rev. B 33 7983
[33] Zhu Y, Ma H T, Fan H 2018 Machine Tool and Hydraulics 46 21
[34] Morse P M 1929 Phys. R 34 57
Google Scholar
[35] Qian Y, Shang F L, Wan Q 2018 J. Appl. Phys. 24 115102
[36] Goel S, Beake B, Chan C W, Faisal N H, Dunne N 2015 Mater. Sci. Eng. A 627 249
Google Scholar
[37] Fan X, Rui Z, Cao H 2019 Materials 12 770
Google Scholar
-
图 1 单晶Al和孪晶Al的纳米压痕三维原子物理模型
Figure 1. Three dimensional physical model for single crystal aluminum and twin aluminum substrates constructed by atomic simulation method.
图 2 单晶Al和孪晶Al纳米压痕时塑性变形差异
Figure 2. Plastic deformation are compared between single crystal Al and twin Al during nano-indentation.
图 3 单晶Al和孪晶Al纳米压痕时剪切变形差异
Figure 3. Shear stain difference between single crystal Al and twin Al during nano-indentation.
图 4 单晶Al和孪晶Al纳米压痕可动位错演化特性对比
Figure 4. Evolution characteristics of movable dislocation are compared by single crystal Al and twin Al during nano-indentation.
图 5 压痕可动位错对孪晶Al变形影响
Figure 5. Influence of movable dislocation on the deformation of twin Al during nano-indentation.
图 6 (a) 纳米压痕中的载荷与位移曲线; (b) 位错线密度与位移曲线; (c)相变转化类型与位移关系; (d) 硬度与孪晶界高度曲线; (e)卸载的粘着数目与孪晶界高度曲线
Figure 6. (a) Load vs. displacement during nano-indentation; (b) dislocation density vs. displacement; (c) phase transition of structure number vs. displacement, (d) hardness vs. twin boundary height, (e) adhesive number vs. twin boundary height.
图 7 强化效应对孪晶Al层数依赖性的定性与定量评价 (a)—(d)多层孪晶塑性变形过程; (e)多层孪晶界高度d和层间距n示意; (f)载荷与位移曲线; (g)接触力0时的探针位移到探针最大下降位移的平均硬度值
Figure 7. Qualitative and quantitative evaluation of the dependence of strengthening effect on single or multilayer layers for twin Al: (a)–(d) Multi-layer twinning plastic deformation process; (e) schematic diagram described according to twin height d and inter-layer distance n; (f) load vs. displacement; (g) average hardness and calculated between tip displacement at initial phase as the contact force is zero and its displacement at last stage.
-
[1] 翁盛槟, 陈晶晶, 周建强, 林晓亮 2021 表面技术 50 216
Weng S B, Chen J J, Zhou J Q, Lin X L 2021 Surf. Tech. 50 216
[2] Alhafez I A, Ruestes C J, Bringa E M, Urbassek H M J 2019 Alloys Compd. 803 618
Google Scholar
[3] Narayan J, Zhu Y T 2008 Appl. Phys. Lett. 92 151908
Google Scholar
[4] Jin Z H, Dunham S T, Gleiter H, Gumbschd P 2011 Scr. Mater 64 60
[5] Jiang Z, Liu X, Li G, Lian J 2006 Appl. Phys. Lett. 88 143115
Google Scholar
[6] Schwaiger R, Moser B, Dao M, Suresh S 2003 Acta Mater. 51 5159
Google Scholar
[7] Wang Y M, Hamza A V, Ma E 2006 Acta Mater. 54 2715
Google Scholar
[8] Wei Y J, Bower A F, Gao H J 2008 Acta Mater. 56 1741
Google Scholar
[9] Zhang K, Weertman J R, Eastman J A 2005 Appl. Phys. Lett. 87 061921
Google Scholar
[10] Gianola D S, Petegem S V, Legros M, Swygenhovenet H V, Hemker K J 2006 Acta Mater. 54 2253
Google Scholar
[11] Rajagopalan J, Han J H, Saif M T A 2007 Science 315 1831
Google Scholar
[12] Rajagopalan J, Han J H, Saif M T A 2008 Scr. Mater. 59 921
Google Scholar
[13] Li X Y, Wei Y J, Yang W, Gao H J 2009 PNAS 106 16108
Google Scholar
[14] 李晓雁 2014 金属学报 50 219
Li X Y 2014 Aata Metal. Sin. 50 219
[15] Frøseth A G, Derlet P M, Swygenhoven H V 2006 Scr. Mater. 54 477
[16] Cao F H, Wang Y J, Dai L H 2020 Acta Mater. 194 283
Google Scholar
[17] Lee S B, Vaid A, Im J, Kim B S, Prakashet A, Guénolé J L, Kiener D, Bitzek E 2020 Nat. Commun. 11 2367
Google Scholar
[18] Lai M, Zhang X D, Fang F Z 2013 Nanoscale Res. Lett. 8 353
Google Scholar
[19] Kizuka T 1998 Phys. Rev. B 57 11158
Google Scholar
[20] Zhang L F, Zhou H F, Qu S X 2012 Nanoscale Res. Lett. 7 1
Google Scholar
[21] Wang Z J, Li Q J, Li Y, Huang L C, Lu L, Dao M, Li J, Ma E, Suresh S, Shan Z W 2017 Nat. Commun. 1108 1
[22] Kou Z D, Yang Y Q, Yang L X 2018 Scr. Mater. 145 28
Google Scholar
[23] Yamakov V, Wolf D, Phillpot S R 2003 Acta Mater. 51 4135
Google Scholar
[24] Zhang M, Chen J, Xu T. J 2020 Appl. Phys. 127 125303
Google Scholar
[25] Liao X Z, Zhou F, Lavernia E J, Srinivasan S G, Baskes M L, He D W, Zhu Y T 2003 Appl. Phys. Lett. 83 632
Google Scholar
[26] Huang C, Peng X H, Yang B, Zhao Y B, Weng S Y, Fu T 2017 Nanomaterials 7 375
Google Scholar
[27] Gravell J D, Ryu I 2020 Acta Mater. 190 58
Google Scholar
[28] Xiang H G, Li H T, Fu T 2017 Acta Mater. 138 131
Google Scholar
[29] Cui Y H, Li H T, Xiang H G, Peng X H 2019 Appl. Surf. Sci. 466 757
Google Scholar
[30] Guo J, Chen J J, Wang Y Q 2020 Ceram. Int. 46 12686
Google Scholar
[31] Stukowski 2009 Model Simul. Mater. S C 18 015012
[32] Foiles S M, Baskes M I, Daw M S 1988 Phys. Rev. B 33 7983
[33] Zhu Y, Ma H T, Fan H 2018 Machine Tool and Hydraulics 46 21
[34] Morse P M 1929 Phys. R 34 57
Google Scholar
[35] Qian Y, Shang F L, Wan Q 2018 J. Appl. Phys. 24 115102
[36] Goel S, Beake B, Chan C W, Faisal N H, Dunne N 2015 Mater. Sci. Eng. A 627 249
Google Scholar
[37] Fan X, Rui Z, Cao H 2019 Materials 12 770
Google Scholar
DownLoad:
Catalog
Metrics
- Abstract views: 6369
- PDF Downloads: 76
- Cited By: 0
