-
In order to precisely control the flying height of TFC head with consideration of microscale thermal effect, the thermal conducting characteristics and the influencing factors on TFC slider which is in an operation and multi-physics field condition were analyzed. In consideration of rarefaction effect of ultra-thin film at the head/disk interface, the models of slider heat conduction, air bearing surface heat transfer, and gas flow were established; the thermal deformation mechanism and the effect of thermal conduction on dynamic characteristics of slider were analyzed by using finite element method. Results show that the thermal conducting model and the proposed modification of Reynolds equation in this study are suitable for solving the problems of thermal deformation and dynamic characteristics of head slider. The main parameters that influence the thermal property of slider can be considered to be the heater height, heat generation rate, and the heat conductivity coefficient of the material. The change of the slider flying height is determined by the air bearing force and the air bearing surface thermal extrusion at the head/disk interface. Simulation results provide a basis for the design of heater in head slider and analysis of dynamic characteristics of air bearing.
-
Keywords:
- TFC head /
- multi-physics field /
- thermal conducting /
- air bearing
[1] Zhang L, Zu X T 2006 Acta Phys. Sin. 55 4271 (in Chinese) [章黎, 祖小涛 2006 55 4271]
[2] Li X, Hu Y Z, Wang H 2005 Acta Phys. Sin. 54 3787 (in Chinese) [李欣, 胡元中, 王慧 2005 54 3787]
[3] Zhang S, Bogy D B 1999 Int’l J. Heat and Mass Transfer 42 1791
[4] Juang J Y, Bogy D B 2007 ASME J. Tribo. 129 570
[5] Chen L, Bogy D B, Strom B 2000 IEEE Trans. Magn. 36 2486
[6] Sungtaek J Y 2000 J. Heat Transfer 122 817
[7] Zhou W D, Liu B, Yu S K 2008 Applied Phy. Lett. 92 043109
[8] Liu M Q, Li B C 2008 Acta Phys. Sin. 57 3402 (in Chinese) [刘明强, 李斌成 2008 57 3402]
[9] Liu X B, Guo Z Y 2009 Acta Phys. Sin. 58 4766 (in Chinese) [柳雄斌, 过增元 2009 58 4766]
[10] Sun J, Liu W Q 2013 Acta Phys. Sin. 62 074401 (in Chinese) [孙健, 刘伟强 2013 62 074401]
[11] Song B, Wu J, Guo Z Y 2010 Acta Phys. Sin. 59 7129 (in Chinese) [宋柏, 吴晶, 过增元 2006 59 7129]
[12] Juang J Y, Bogy D B 2006 IEEE Trans. Magn. 42 241
[13] Li H, Liu B, Chong T 2005 Proceedings of the INTERMAG Asia 2005 Nagoya, Japan, April 4–8 2005 p1391–1392
[14] Burgdorfer A 1959 Trans. ASME, Ser. D 81 94
[15] Hsia Y T, Domoto G A 1983 J. Lubr. Tech. 105 120
[16] Gans R F 1985 J. Trib. 107 431
[17] Cai J, Huai X L 2009 Chin. Phys. Lett. 26 064401
[18] Seripah A K, Ishak H, Sim S J 2007 Chin. Phys. Lett. 27 1981
[19] Fukui S, Kaneko R 1988 J. Trib. 110 253
[20] Yang T Y, Shi B J 2010 Lubrication Engineering 6 73 (in Chinese) [杨廷毅, 史宝军 2010 润滑与密封 6 73]
[21] Bai S X, Peng X D, Meng Y G 2009 China Mech. Eng. 10 1 (in Chinese) [白少先, 彭旭东, 孟永钢 2009 中国机械工程 10 1]
[22] Wei H D, Ao H R, Jiang H Y 2009 J. of Harbin Inst. of Tech. 41 682 (in Chinese) [魏浩东, 敖宏瑞, 姜洪源 2009 哈尔滨工业大学学报 41 682]
[23] Liu J 2001 Micro/Nano Scale Heat Transfer (Beijing: Science Press) p73 (in Chinese) [刘静 2001 微米/纳米尺度传热学(北京: 科学出版社)第73页]
[24] Vinogradova O I 1995 Langmuir 11 2213
[25] Wang G, An L 2012 COMSOL Multiphysics Engineering Practice and Theoretical Simulation (Beijing: Pressing House of Electronics Industry) p103 (in Chinese) [王刚, 安琳 2012 COMSOL Multiphysics工程实践与理论仿真(北京: 电子工业出版社)第103 页]
-
[1] Zhang L, Zu X T 2006 Acta Phys. Sin. 55 4271 (in Chinese) [章黎, 祖小涛 2006 55 4271]
[2] Li X, Hu Y Z, Wang H 2005 Acta Phys. Sin. 54 3787 (in Chinese) [李欣, 胡元中, 王慧 2005 54 3787]
[3] Zhang S, Bogy D B 1999 Int’l J. Heat and Mass Transfer 42 1791
[4] Juang J Y, Bogy D B 2007 ASME J. Tribo. 129 570
[5] Chen L, Bogy D B, Strom B 2000 IEEE Trans. Magn. 36 2486
[6] Sungtaek J Y 2000 J. Heat Transfer 122 817
[7] Zhou W D, Liu B, Yu S K 2008 Applied Phy. Lett. 92 043109
[8] Liu M Q, Li B C 2008 Acta Phys. Sin. 57 3402 (in Chinese) [刘明强, 李斌成 2008 57 3402]
[9] Liu X B, Guo Z Y 2009 Acta Phys. Sin. 58 4766 (in Chinese) [柳雄斌, 过增元 2009 58 4766]
[10] Sun J, Liu W Q 2013 Acta Phys. Sin. 62 074401 (in Chinese) [孙健, 刘伟强 2013 62 074401]
[11] Song B, Wu J, Guo Z Y 2010 Acta Phys. Sin. 59 7129 (in Chinese) [宋柏, 吴晶, 过增元 2006 59 7129]
[12] Juang J Y, Bogy D B 2006 IEEE Trans. Magn. 42 241
[13] Li H, Liu B, Chong T 2005 Proceedings of the INTERMAG Asia 2005 Nagoya, Japan, April 4–8 2005 p1391–1392
[14] Burgdorfer A 1959 Trans. ASME, Ser. D 81 94
[15] Hsia Y T, Domoto G A 1983 J. Lubr. Tech. 105 120
[16] Gans R F 1985 J. Trib. 107 431
[17] Cai J, Huai X L 2009 Chin. Phys. Lett. 26 064401
[18] Seripah A K, Ishak H, Sim S J 2007 Chin. Phys. Lett. 27 1981
[19] Fukui S, Kaneko R 1988 J. Trib. 110 253
[20] Yang T Y, Shi B J 2010 Lubrication Engineering 6 73 (in Chinese) [杨廷毅, 史宝军 2010 润滑与密封 6 73]
[21] Bai S X, Peng X D, Meng Y G 2009 China Mech. Eng. 10 1 (in Chinese) [白少先, 彭旭东, 孟永钢 2009 中国机械工程 10 1]
[22] Wei H D, Ao H R, Jiang H Y 2009 J. of Harbin Inst. of Tech. 41 682 (in Chinese) [魏浩东, 敖宏瑞, 姜洪源 2009 哈尔滨工业大学学报 41 682]
[23] Liu J 2001 Micro/Nano Scale Heat Transfer (Beijing: Science Press) p73 (in Chinese) [刘静 2001 微米/纳米尺度传热学(北京: 科学出版社)第73页]
[24] Vinogradova O I 1995 Langmuir 11 2213
[25] Wang G, An L 2012 COMSOL Multiphysics Engineering Practice and Theoretical Simulation (Beijing: Pressing House of Electronics Industry) p103 (in Chinese) [王刚, 安琳 2012 COMSOL Multiphysics工程实践与理论仿真(北京: 电子工业出版社)第103 页]
Catalog
Metrics
- Abstract views: 6835
- PDF Downloads: 590
- Cited By: 0
下载:
