| [1] |
Lei Zhen-Shuai, Sun Xiao-Wei, Liu Zi-Jiang, Song Ting, Tian Jun-Hong. Phase diagram prediction and high pressure melting characteristics of GaN. Acta Physica Sinica,
2022, 71(19): 198102.
doi: 10.7498/aps.71.20220510
|
| [2] |
Cheng Yi-Ting, Andrey S. Makarov, Gennadii V. Afonin, Vitaly A. Khonik, Qiao Ji-Chao. Evolution of defect concentration in Zr50–xCu34Ag8Al8Pdx (x = 0, 2) amorphous alloys derived using shear modulus and calorimetric data. Acta Physica Sinica,
2021, 70(14): 146401.
doi: 10.7498/aps.70.20210256
|
| [3] |
Fang Fang, Bao Lin, Tong Bing-Gang. Heat transfer characteristics of shear layer impinging on wall based on oblique stagnation-point model. Acta Physica Sinica,
2020, 69(21): 214401.
doi: 10.7498/aps.69.20201000
|
| [4] |
Wang Lin-Wei, Xu Sheng-Hua, Zhou Hong-Wei, Sun Zhi-Wei, Ouyang Wen-Ze, Xu Feng. Theoretical improvement on the determination of effective elasticity charges for charged colloidal particles. Acta Physica Sinica,
2017, 66(6): 066102.
doi: 10.7498/aps.66.066102
|
| [5] |
Wang Xiang, Chao Run-Ze, Guan Ren-Guo, Li Yuan-Dong, Liu Chun-Ming. Theoretical study on the model of metalic melt shearing flow near the surface and its effect on solidification microstructure. Acta Physica Sinica,
2015, 64(11): 116601.
doi: 10.7498/aps.64.116601
|
| [6] |
Tan Ye, Yu Yu-Ying, Dai Cheng-Da, Yu Ji-Dong, Wang Qing-Song, Tan Hua. Release melting of bismuth. Acta Physica Sinica,
2013, 62(3): 036401.
doi: 10.7498/aps.62.036401
|
| [7] |
Zhang Song-Peng, Zhang Xiang-Jun, Tian Yu, Meng Yong-Gang. A quantitative model and experimental investigations of wall shear stress between solid and gaseous fluid using liquid crystal coating. Acta Physica Sinica,
2012, 61(23): 234702.
doi: 10.7498/aps.61.234702
|
| [8] |
Xin Jie, Xiang Shi-Kai, Cai Ling-Cang. Theoretical calculations of high-pressure melting curves of five metals. Acta Physica Sinica,
2012, 61(1): 016401.
doi: 10.7498/aps.61.016401
|
| [9] |
Zhang Shi-Lai, Liu Fu-Sheng, Peng Xiao-Juan, Zhang Ming-Jian, Li Yong-Hong, Ma Xiao-Juan, Xue Xue-Dong. Transformation kinetics of metal and experimental measurement at nanosecond order. Acta Physica Sinica,
2011, 60(1): 014401.
doi: 10.7498/aps.60.014401
|
| [10] |
Song Ping, Wang Qing-Song, Dai Cheng-Da, Cai Ling-Cang, Zhang Yi, Weng Ji-Dong. Sound velocity and shock melting of low porosity aluminum. Acta Physica Sinica,
2011, 60(4): 046201.
doi: 10.7498/aps.60.046201
|
| [11] |
Guo Chun-Sheng, Shan Ni-Na, Feng Shi-Wei, Ma Wei-Dong. Error correction of theory model of process stress accelerated test. Acta Physica Sinica,
2010, 59(4): 2350-2355.
doi: 10.7498/aps.59.2350
|
| [12] |
Sun Qi-Cheng, Zhang Guo-Hua, Wang Bo, Wang Guang-Qian. Shear modulus of semi-flexible networks in two dimensions. Acta Physica Sinica,
2009, 58(9): 6549-6553.
doi: 10.7498/aps.58.6549
|
| [13] |
Hou Ri-Li, Peng Jian-Xiang, Jing Fu-Qian. A constitutive model for predicting shear modulus of metals using aluminum as the prototype. Acta Physica Sinica,
2009, 58(9): 6413-6418.
doi: 10.7498/aps.58.6413
|
| [14] |
Yu Yu-Ying, Tan Hua, Hu Jian-Bo, Dai Cheng-Da, Chen Da-Nian, Wang Huan-Ran. Effective shear modulus in shock-compressed aluminum. Acta Physica Sinica,
2008, 57(4): 2352-2357.
doi: 10.7498/aps.57.2352
|
| [15] |
Peng Jian-Xiang, Jing Fu-Qian, Wang Li-Li, Li Da-Hong. Pressure and temperature dependence of shear modulus and yield strength for aluminum, copper and tungsten under shock compression. Acta Physica Sinica,
2005, 54(5): 2194-2197.
doi: 10.7498/aps.54.2194
|
| [16] |
Hu Jian-Bo, Yu Yu-Ying, Dai Cheng-Da, Tan Hua. Shear modulus of aluminum under shock loading. Acta Physica Sinica,
2005, 54(12): 5750-5754.
doi: 10.7498/aps.54.5750
|
| [17] |
Hua Jing-Song, Jing Fu-Qian, Tan Hua, Zhuo Xian-Ming. A method to estimate the temperature coefficient for shear modulus. Acta Physica Sinica,
2005, 54(1): 246-250.
doi: 10.7498/aps.54.246
|
| [18] |
Wang JianWang, Shao-Qing. Tight-binding molecular-dynamics study of melting behaviour of small silicon clu sters. Acta Physica Sinica,
2003, 52(11): 2854-2858.
doi: 10.7498/aps.52.2854
|
| [19] |
HUA JING-SONG, JIN FU-QIAN, TAN HUA. A THEORETICAL METHOD TO OBTAIN THE SECOND ORDER PARTIAL DERIVATIVE OF SHEAR MODU LUS WITH RESPECT TO PRESSURE. Acta Physica Sinica,
2000, 49(12): 2443-2447.
doi: 10.7498/aps.49.2443
|
| [20] |
XIE PAN-HAI. NEW FORMULAE FOR CALCULATING MELTJNG TEMPERA-TURE, GRüNEISEN PARAMETER AND ISOTHERMAL PRESSURE OF METALS UNDER HIGH PRESSURE. Acta Physica Sinica,
1983, 32(8): 1086-1092.
doi: 10.7498/aps.32.1086
|
下载:
