搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

B2O3添加宝石级金刚石单晶的生长特性

肖宏宇 刘利娜 秦玉琨 张东梅 张永胜 隋永明 梁中翥

引用本文:
Citation:

B2O3添加宝石级金刚石单晶的生长特性

肖宏宇, 刘利娜, 秦玉琨, 张东梅, 张永胜, 隋永明, 梁中翥

Syntheses of B2O3-doped gem-diamond single crystals

Xiao Hong-Yu, Liu Li-Na, Qin Yu-Kun, Zhang Dong-Mei, Zhang Yong-Sheng, Sui Yong-Ming, Liang Zhong-Zhu
PDF
导出引用
  • 利用温度梯度法, 在5.3-5.7 GPa压力、1200-1600 ℃的温度条件下, 将B2O3粉添加到FeNiMnCo+C合成体系内, 进行B2O3添加宝石级金刚石单晶的合成. 研究得到了FeNiMnCo触媒生长B2O3添加宝石级金刚石单晶的相图分布规律. 结果表明B2O3添加会使晶体生长的“V”形区上移和低温六面体单晶生长区间变宽. 通过晶体生长实验, 研究合成了不同形貌的B2O3添加宝石级金刚石单晶. 研究同时证实, B2O3的过量添加会对宝石级金刚石单晶生长带来不利影响. 当B2O3的添加量高于约3 wt‰、生长时间超过20 h时, 很难实现优质B2O3添加宝石级金刚石单晶的生长. 但B2O3的适量添加(不超过1 wt‰), 有助于提高低温板状六面体宝石级金刚石单晶的成品率. 通过对晶体生长速度的研究发现, B2O3的添加使得优质晶体的生长速度明显降低, 随着晶体生长时间的延长, B2O3添加剂对晶体生长的抑制作用会越发明显. 扫描电镜测试结果表明, 合成体系内B2O3添加剂的引入, 导致晶体表面的平整度明显下降.
    In the present paper, by the temperature gradient method, the gem-diamond single crystals with B2O3-added in the synthetic system of the FeNiMnCo-C are synthesized under 5.3-5.7 GPa and 1200-1600℃. The P-T phase diagram of diamond single crystal growing in the synthesis system of the FeNiMnCo-C-B2O3, is obtained. By B2O3-added in synthesis system, the V-shape section for the diamond growth, which is the region between the solvent/carbon eutectic melting line and diamond/graphite equilibrium line under pressure and temperature, is moved upwards. We find that the minimum pressure of diamond growing increases from 5.3 GPa to 5.4 GPa and the synthesis range of the low temperature hexahedron diamond growth becomes wider, which can be due to the chemical energy increase of the carbon depositing in the diamond surface by the additive of the B2O3. The synthetic diamond single crystal exhibits a perfect hexahedral shape or cubo-octahedral shape or octahedral shape. In the system of the FeNiMnCo-C-B2O3, we think that the catalyst activity decreases with the generation of CO2, so high-quality diamond single crystal can hardly be synthesized when the content of the B2O3 is more than 3 wt‰ and synthesis time is more than 20 h, However, when the content of the B2O3 is no more than 1 wt‰, the rate of finished products of the low temperature hexahedron diamond will increase significantly. Because the amount of the B2O3 additive is so small, in the syntheses of B2O3-added diamond single crystals, the black areas which appear when B element enters into diamond crystal lattice are not observed. The growth rate of diamond single crystal will be reduced obviously by B2O3-added in synthetic system. Under our system synthesis, when the growth time is 10 h, the growth rate of the diamond will reduce 0.22 mg/h by 2 wt‰ B2O3 added in synthetic system. When the growth time extends to 20 h, the growth rate increases to 0.47 mg/h. Moreover, with the extension of growth time, the catalyst activity decreases continuously with the product of the CO2 increasing in the reaction chamber, so the effect of additive on the growth of diamond strengthens gradually. The results of the scanning electron microscope images indicate that the surface defects of the diamond crystal increases by the addition of B2O3.
      通信作者: 隋永明, xiaohy0205@163.com
    • 基金项目: 国家自然科学基金青年科学基金(批准号: 51302128, 61007023)、吉林大学超硬材料国家重点实验室开放课题和河南省教育厅项目(批准号: 13A140792, 13B140140, 14A140018)资助的课题.
      Corresponding author: Sui Yong-Ming, xiaohy0205@163.com
    • Funds: Project supported by the Young Scientists Fund of the National Natural Science Foundation of China (Grant Nos. 51302128, 61007023), the Foundation of the National Lab of Superhard Materials, Jilin University, China, and the Education Department of Henan Province, China (Grant Nos. 13A140792, 13B140140, 14A140018).
    [1]

    Strong H M 1989 American J. Phys. 57 794

    [2]

    Bundy F P, Hall H T, Strong H M, Wentorf Jr R H 1955 Nature 176 51

    [3]

    Bovenkerk H P, Bundy F P, Hall H T, Strong H M, Wentorf Jr R H 1959 Nature 184 1094

    [4]

    Strong H M 1960 U. S. Patent 2947609 [1960-08-02]

    [5]

    Hall H T, Strong H M, Wentorf Jr R H 1960 U. S. Patent 2947610 [1960-08-02]

    [6]

    Strong H M 1963 J. Phys. Chem. 39 2057

    [7]

    Sumiya H, Toda N, Nishibayashi Y, Satoh S 1997 J. Cryst. Growth 178 485

    [8]

    Schein J, Campbell K M, Prasad R R, Prasad R R, Binder R, Krishnan M 2002 Rev. Sci. Instrum. 73 18

    [9]

    Yamamoto M, Kumasaka T, Ishikawa T 2000 Rev. High Pres. Sci. Technol. 10 56

    [10]

    Sumiya H, Toda N, Satoh S 2002 J. Cryst. Growth 237 1281

    [11]

    Kanda H 2001 Radi. Effe. Defe. Solids 156 163

    [12]

    Shigley J E, Frotsch E, Stockton C M, Koivula J I, Fryer C W, Kane R E 1986 Gem. Gemmol. 22 192

    [13]

    Burns R C, Hansen J O, Spits R A, Sibanda M, Welbourn C M, Welch D L 1999 Diamond Relat. Mater. 8 1433

    [14]

    Sumiya H, Harano K, Tamasaku K 2015 Diamond Relat. Mater. 58 221

    [15]

    Khokhryakov A F, Palyanov Y, Kupriyanov I, Borzdov Y, Sokol A G 2014 J. Cryst. Growth 386 162

    [16]

    Li Y, Jia X P, Feng Y G, Fang C, Fan L J, Li Y D, Zeng X, Ma H A 2015 Chin. Phys. B 24 088104

    [17]

    Hu M H, Bi N, Li S S, Su T C, Zhou A G, Hu Q, Jia X P, Ma H A 2015 Chin. Phys. B 24 038101

    [18]

    Zhang Z F, Jia X P, Liu X B, Hu M H, Li Y, Yan B M, Ma H A 2012 Chin. Phys. B 21 038103

    [19]

    Xiao H Y, Li S S, Qin Y K, Liang Z Z, Zhang Y S, Zhang D M, Zhang Y S 2014 Acta Phys. Sin. 63 198101 (in Chinese) [肖宏宇, 李尚升, 秦玉琨, 梁中翥, 张永胜, 张东梅, 张义顺 2014 63 198101]

  • [1]

    Strong H M 1989 American J. Phys. 57 794

    [2]

    Bundy F P, Hall H T, Strong H M, Wentorf Jr R H 1955 Nature 176 51

    [3]

    Bovenkerk H P, Bundy F P, Hall H T, Strong H M, Wentorf Jr R H 1959 Nature 184 1094

    [4]

    Strong H M 1960 U. S. Patent 2947609 [1960-08-02]

    [5]

    Hall H T, Strong H M, Wentorf Jr R H 1960 U. S. Patent 2947610 [1960-08-02]

    [6]

    Strong H M 1963 J. Phys. Chem. 39 2057

    [7]

    Sumiya H, Toda N, Nishibayashi Y, Satoh S 1997 J. Cryst. Growth 178 485

    [8]

    Schein J, Campbell K M, Prasad R R, Prasad R R, Binder R, Krishnan M 2002 Rev. Sci. Instrum. 73 18

    [9]

    Yamamoto M, Kumasaka T, Ishikawa T 2000 Rev. High Pres. Sci. Technol. 10 56

    [10]

    Sumiya H, Toda N, Satoh S 2002 J. Cryst. Growth 237 1281

    [11]

    Kanda H 2001 Radi. Effe. Defe. Solids 156 163

    [12]

    Shigley J E, Frotsch E, Stockton C M, Koivula J I, Fryer C W, Kane R E 1986 Gem. Gemmol. 22 192

    [13]

    Burns R C, Hansen J O, Spits R A, Sibanda M, Welbourn C M, Welch D L 1999 Diamond Relat. Mater. 8 1433

    [14]

    Sumiya H, Harano K, Tamasaku K 2015 Diamond Relat. Mater. 58 221

    [15]

    Khokhryakov A F, Palyanov Y, Kupriyanov I, Borzdov Y, Sokol A G 2014 J. Cryst. Growth 386 162

    [16]

    Li Y, Jia X P, Feng Y G, Fang C, Fan L J, Li Y D, Zeng X, Ma H A 2015 Chin. Phys. B 24 088104

    [17]

    Hu M H, Bi N, Li S S, Su T C, Zhou A G, Hu Q, Jia X P, Ma H A 2015 Chin. Phys. B 24 038101

    [18]

    Zhang Z F, Jia X P, Liu X B, Hu M H, Li Y, Yan B M, Ma H A 2012 Chin. Phys. B 21 038103

    [19]

    Xiao H Y, Li S S, Qin Y K, Liang Z Z, Zhang Y S, Zhang D M, Zhang Y S 2014 Acta Phys. Sin. 63 198101 (in Chinese) [肖宏宇, 李尚升, 秦玉琨, 梁中翥, 张永胜, 张东梅, 张义顺 2014 63 198101]

  • [1] 羊美丽, 邹丽, 程佳杰, 王佳明, 江钰帆, 郝会颖, 邢杰, 刘昊, 樊振军, 董敬敬. 聚偏氟乙烯添加剂提高CsPbBr3钙钛矿太阳能电池性能.  , 2023, 72(16): 168101. doi: 10.7498/aps.72.20230636
    [2] 肖宏宇, 李勇, 鲍志刚, 佘彦超, 王应, 李尚升. 触媒组分对高温高压金刚石大单晶生长及裂纹缺陷的影响.  , 2023, 72(2): 020701. doi: 10.7498/aps.72.20221841
    [3] 杨功章, 谢雷, 陈喜平, 何瑞琦, 韩铁鑫, 牛国梁, 房雷鸣, 贺端威. 巴黎-爱丁堡压机中子衍射高压下温度加载实验.  , 2022, 71(15): 156101. doi: 10.7498/aps.71.20220419
    [4] 申双林, 张小坤, 万兴文, 郑克晴, 凌意瀚, 王绍荣. 固体氧化物燃料电池温升模拟中入口异常高温度梯度研究.  , 2022, 71(16): 164401. doi: 10.7498/aps.71.20220031
    [5] 尤悦, 李尚升, 宿太超, 胡美华, 胡强, 王君卓, 高广进, 郭明明, 聂媛. 高温高压下金刚石大单晶研究进展.  , 2020, 69(23): 238101. doi: 10.7498/aps.69.20200692
    [6] 王凯悦, 郭睿昂, 王宏兴. 金刚石氮-空位缺陷发光的温度依赖性.  , 2020, 69(12): 127802. doi: 10.7498/aps.69.20200395
    [7] 张步强, 许振宇, 刘建国, 姚路, 阮俊, 胡佳屹, 夏晖晖, 聂伟, 袁峰, 阚瑞峰. 基于波长调制技术的高温高压流场温度测量方法.  , 2019, 68(23): 233301. doi: 10.7498/aps.68.20190515
    [8] 李勇, 王应, 李尚升, 李宗宝, 罗开武, 冉茂武, 宋谋胜. 硼硫协同掺杂金刚石的高压合成与电学性能研究.  , 2019, 68(9): 098101. doi: 10.7498/aps.68.20190133
    [9] 刘毅, 徐征, 赵谡玲, 乔泊, 李杨, 秦梓伦, 朱友勤. 双添加剂处理电子传输层富勒烯衍生物[6,6]-苯基-C61丁酸甲酯对钙钛矿太阳能电池性能的影响.  , 2017, 66(11): 118801. doi: 10.7498/aps.66.118801
    [10] 刘银娟, 贺端威, 王培, 唐明君, 许超, 王文丹, 刘进, 刘国端, 寇自力. 复合超硬材料的高压合成与研究.  , 2017, 66(3): 038103. doi: 10.7498/aps.66.038103
    [11] 刘宸, 孙宏祥, 袁寿其, 夏建平. 基于温度梯度分布的宽频带声聚焦效应.  , 2016, 65(4): 044303. doi: 10.7498/aps.65.044303
    [12] 李勇, 李宗宝, 宋谋胜, 王应, 贾晓鹏, 马红安. 硼氢协同掺杂Ib型金刚石大单晶的高温高压合成与电学性能研究.  , 2016, 65(11): 118103. doi: 10.7498/aps.65.118103
    [13] 房超, 贾晓鹏, 陈宁, 周振翔, 李亚东, 李勇, 马红安. 添加Fe(C5H5)2合成氢掺杂金刚石大单晶及其表征.  , 2015, 64(12): 128101. doi: 10.7498/aps.64.128101
    [14] 房超, 贾晓鹏, 颜丙敏, 陈宁, 李亚东, 陈良超, 郭龙锁, 马红安. 高温高压下氮氢协同掺杂对{100}晶面生长宝石级金刚石的影响.  , 2015, 64(22): 228101. doi: 10.7498/aps.64.228101
    [15] 周振翔, 贾晓鹏, 李勇, 颜丙敏, 王方标, 房超, 陈宁, 李亚东, 马红安. 锌添加对大尺寸金刚石生长的影响.  , 2014, 63(24): 248104. doi: 10.7498/aps.63.248104
    [16] 肖宏宇, 李尚升, 秦玉琨, 梁中翥, 张永胜, 张东梅, 张义顺. 高温高压下掺硼宝石级金刚石单晶生长特性的研究.  , 2014, 63(19): 198101. doi: 10.7498/aps.63.198101
    [17] 肖宏宇, 苏剑峰, 张永胜, 鲍志刚. 温度梯度法宝石级金刚石的合成及表征.  , 2012, 61(24): 248101. doi: 10.7498/aps.61.248101
    [18] 秦杰明, 张莹, 曹建明, 田立飞. 纯铁触媒合成磨料级金刚石及表征.  , 2011, 60(5): 058102. doi: 10.7498/aps.60.058102
    [19] 陈曦, 王霞, 吴锴, 彭宗仁, 成永红. 温度梯度场对电声脉冲法空间电荷测量波形的影响.  , 2010, 59(10): 7327-7332. doi: 10.7498/aps.59.7327
    [20] 文潮, 孙德玉, 李迅, 关锦清, 刘晓新, 林英睿, 唐仕英, 周刚, 林俊德, 金志浩. 炸药爆轰法制备纳米石墨粉及其在高压合成金刚石中的应用.  , 2004, 53(4): 1260-1264. doi: 10.7498/aps.53.1260
计量
  • 文章访问数:  6476
  • PDF下载量:  229
  • 被引次数: 0
出版历程
  • 收稿日期:  2015-11-18
  • 修回日期:  2015-12-16
  • 刊出日期:  2016-03-05

/

返回文章
返回
Baidu
map