-
For a long time, empirical formulars have been used to predict the steady-state creep rate due to lack of clear microscopic description of the mechanism, which frequently leads to unreliable predictions. In this work, a statistical model of single atom developed recently is used to predict the steady-state creep rate at an atomic diffusion level. To test the model, we measure the creep rates of three kinds of materials, i.e., 42CrMoA, 2Cr12Ni, and 1Cr12Mo, and collect the experimental data of other materials, such as IN738LC and K435. The results show that our theoretical predicts are in good agreement with the experimental results.
-
Keywords:
- creep rate /
- statistical physics /
- single atom model
[1] Bressers J 1981 Creep and Fatigue in High Temperature Alloys (London：Applied Science Publishers Ltd.) pp 1–5
[2] Lin Y C, Xia Y C, Chen M S, Jiang Y Q Li L T 2013 Comput. Mater. Sci. 67 243
[3] Marahleh G, Kheder A R I, Hamad H F 2006 Mater. Sci. Eng. A 433 305
[4] Ji F, Song A J, Zhang W G, Hao Q H, Bai B W, Liu R P, Ma M Z 2010 Acta Phys. Sin. 59 2114 (in Chinese) [嵇峰, 宋爱君, 张卫国, 郝秋红, 白邦伟, 刘日平, 马明臻 2010 59 2114]
[5] Odqvist F K G, Hult J 1962 Kriechfestigkeit Metallischer Werkstoffe (Berlin: Springer) pp 6–30
[6] Penny R K, Mariott D L 1995 Design for Creep (2nd Ed.) (London: Chapman & Hall) pp 8–41
[7] Rabotnov Y N 1979 Mechanics of the Deformable Solid (in Russian) (Moscow: Nauka) pp 1–14
[8] Skrzypek J J 1993 Plasticity and Creep (Boca Raton: CRC Press) pp 14–35
[9] Lin Z Z, Yu W F, Wang Y, Ning X J 2011 Europhys. Lett. 94 40002
[10] Lin Z Z, Zhuang J, Ning X J 2012 Europhys. Lett. 97 27006
[11] Ming C, Lin Z Z, Cao R G, Yu W F, Ning X J 2012 Carbon 50 2651
[12] Han X J, Wang Y, Lin Z Z, Zhang W X, Zhuang J, Ning X J 2010 J. Chem. Phys. 132 064103
[13] Li W Y, Lin Z Z, Xu J J, Ning X J 2012 Chin. Phys. Lett. 29 080504
[14] Norton F H 1929 The Creep of Steel at High Temperature (New York: McGraw-Hill) pp 36–52
[15] Garofalo F 1965 Fundamentals of Creep and Creep-rupture in Metals (New York: Macmillan) pp 46–65
[16] Tobolová Z, Čadek J 1979 Philos. Mag. 26 1419
[17] Nabarro F R N, de Villiers H L 1995 The Physics of Creep and Creep-Resistant Alloys (1st Ed.) (London: Taylor & Francis) pp 25–33
[18] Mukherjee A K, Bird J E, Dorn J E 1969 Trans. ASM 62 62
[19] Guo J T 2008 Materials Science and Engineering for Superalloys (Vol. 1) (Beijing: Science Press) p 400 (in Chinese) [郭建亭 2008 高温合金材料学(上册) (北京: 科学出版社) 第400页]
[20] Dash W C 1958 J. Appl. Phys. 29 705
[21] Seitz F 1950 Phys. Rev. 79 890
-
[1] Bressers J 1981 Creep and Fatigue in High Temperature Alloys (London：Applied Science Publishers Ltd.) pp 1–5
[2] Lin Y C, Xia Y C, Chen M S, Jiang Y Q Li L T 2013 Comput. Mater. Sci. 67 243
[3] Marahleh G, Kheder A R I, Hamad H F 2006 Mater. Sci. Eng. A 433 305
[4] Ji F, Song A J, Zhang W G, Hao Q H, Bai B W, Liu R P, Ma M Z 2010 Acta Phys. Sin. 59 2114 (in Chinese) [嵇峰, 宋爱君, 张卫国, 郝秋红, 白邦伟, 刘日平, 马明臻 2010 59 2114]
[5] Odqvist F K G, Hult J 1962 Kriechfestigkeit Metallischer Werkstoffe (Berlin: Springer) pp 6–30
[6] Penny R K, Mariott D L 1995 Design for Creep (2nd Ed.) (London: Chapman & Hall) pp 8–41
[7] Rabotnov Y N 1979 Mechanics of the Deformable Solid (in Russian) (Moscow: Nauka) pp 1–14
[8] Skrzypek J J 1993 Plasticity and Creep (Boca Raton: CRC Press) pp 14–35
[9] Lin Z Z, Yu W F, Wang Y, Ning X J 2011 Europhys. Lett. 94 40002
[10] Lin Z Z, Zhuang J, Ning X J 2012 Europhys. Lett. 97 27006
[11] Ming C, Lin Z Z, Cao R G, Yu W F, Ning X J 2012 Carbon 50 2651
[12] Han X J, Wang Y, Lin Z Z, Zhang W X, Zhuang J, Ning X J 2010 J. Chem. Phys. 132 064103
[13] Li W Y, Lin Z Z, Xu J J, Ning X J 2012 Chin. Phys. Lett. 29 080504
[14] Norton F H 1929 The Creep of Steel at High Temperature (New York: McGraw-Hill) pp 36–52
[15] Garofalo F 1965 Fundamentals of Creep and Creep-rupture in Metals (New York: Macmillan) pp 46–65
[16] Tobolová Z, Čadek J 1979 Philos. Mag. 26 1419
[17] Nabarro F R N, de Villiers H L 1995 The Physics of Creep and Creep-Resistant Alloys (1st Ed.) (London: Taylor & Francis) pp 25–33
[18] Mukherjee A K, Bird J E, Dorn J E 1969 Trans. ASM 62 62
[19] Guo J T 2008 Materials Science and Engineering for Superalloys (Vol. 1) (Beijing: Science Press) p 400 (in Chinese) [郭建亭 2008 高温合金材料学(上册) (北京: 科学出版社) 第400页]
[20] Dash W C 1958 J. Appl. Phys. 29 705
[21] Seitz F 1950 Phys. Rev. 79 890
Catalog
Metrics
- Abstract views: 6862
- PDF Downloads: 802
- Cited By: 0
下载:
