-
A thorough analysis of the mechanism of vibrational force field on polymer processing was carried out to investigate the effect of vibration parameters on polymer viscoelasticity and plastic forming processing. The relationship between phase angle and lagging heat generation rate as well as the expression of polymer plasticizing rate under vibrational force field was obtained. To verify the theory, PET was adopted for example calculation and in expriments with dynamic capillary rheometer and mlti-dimentional vibration induced plastic forming equimpment. The result from calculation agrees well with that from experiment. Besides, it can be concluded that the plasticizing rate of PET increases at first and decreases afterwards with increasing vibration frequency. It reaches the peak at vibration frequency equivalent to the natural frequency of PET of about 15 Hz. The value remains at 22 g/min with the natural vibration frequency when the vibration amplitude is 6 MPa, being 1.75 fold that with vibration frequency of 10 Hz. Therefore, the plasticizing rate of polymer can be significantly improved by increasing the vibration amplitude. The exploration in this paper supplies reliable thoeretical reference for novel polymer low temperature moulding technique and equipments.
-
Keywords:
- vibration force field /
- hysteresis thermogenous /
- phase angle /
- low temperature processing
[1] Qu J P,Zeng G S 2006 Journal of Chemical Industry and Engineering 57 414(in Chinese) [瞿金平、曾广胜 2006 化工学报 57 414 ]
[2] Zeng G S,Qu J P 2006 Journal of Chemical Industry and Engineering 57 424(in Chinese) [曾广胜、 瞿金平2006 化工学报 57 424 ]
[3] Zeng G S,Qu J P 2006 Chinese Journal of Materials Research 20 59(in Chinese) [曾广胜、 瞿金平 2006 材料研究学报 20 59 ]
[4] Zeng G S,Qu J P 2005 Journal of South China University of Technology(Natural Science Edition) 33 14 (in Chinese) [曾广胜、 瞿金平 2005华南理工大学学报33 14 ]
[5] Qu J P 2005 Theory and Technic of Polymer Dynamic Plastication Process (Beijing: Since Press)(in Chinese)[瞿金平 2005聚合物动态塑化成型加工理论与技术(北京:科学出版社)]
[6] Qu J P, Zeng G S 2006 Journal of Applied Polymer Science 100 3860
[7] Zeng G S,Qu J P 2007 Journal of Applied Polymer Science 104 2504
[8] Zeng G S,Qu J P 2007 Journal of Applied Polymer Science 106 1152
[9] Zeng G S,Qu J P 2008 Materials Science and Technology 16 235 (in Chinese) [曾广胜、 瞿金平 2008 材材料科学与工艺16 235 ]
[10] Zeng G S,Qu J P,He H Z,Jin G 2007 Journal of Chemical Industry and Engineering 58 3158 (in Chinese) [曾广胜、 瞿金平、 何和智、 晋 刚2007 化工学报 58 3158 ]
[11] Zeng G S,Qu J P,He H Z,Jin G 2007 Journal of Chemical Industry and Engineering 58 3164 (in Chinese) [曾广胜、 瞿金平、 何和智、 晋 刚2007 化工学报 58 3164 ]
[12] Ma LX, Zhang F L,Cui Q, He Y, Zhang P 2005 China Elastomerics 15 44 (in Chinese) [马连湘、 张方良、 崔 琪、 何 燕、 张 萍2005 弹性体 15 44]
[13] Xie F X, Xin Q Y, Gu R M 2007 China Synthetic Rubber Industry 30 306 (in chinese) [谢富霞、 辛泉友、 顾润民 2007 合成橡胶工业 30 306]
[14] He Y, Ma L X, Huang S Y 2007 Tyre Industry 27 451(in Chinese) [何 燕、 马连湘、 黄素逸 2007轮胎工业 27 451]
[15] Xu Z M, Huang P 2006 Acta Phys. Sin.55 2427[许中明、 黄 平 2006 55 2427]
-
[1] Qu J P,Zeng G S 2006 Journal of Chemical Industry and Engineering 57 414(in Chinese) [瞿金平、曾广胜 2006 化工学报 57 414 ]
[2] Zeng G S,Qu J P 2006 Journal of Chemical Industry and Engineering 57 424(in Chinese) [曾广胜、 瞿金平2006 化工学报 57 424 ]
[3] Zeng G S,Qu J P 2006 Chinese Journal of Materials Research 20 59(in Chinese) [曾广胜、 瞿金平 2006 材料研究学报 20 59 ]
[4] Zeng G S,Qu J P 2005 Journal of South China University of Technology(Natural Science Edition) 33 14 (in Chinese) [曾广胜、 瞿金平 2005华南理工大学学报33 14 ]
[5] Qu J P 2005 Theory and Technic of Polymer Dynamic Plastication Process (Beijing: Since Press)(in Chinese)[瞿金平 2005聚合物动态塑化成型加工理论与技术(北京:科学出版社)]
[6] Qu J P, Zeng G S 2006 Journal of Applied Polymer Science 100 3860
[7] Zeng G S,Qu J P 2007 Journal of Applied Polymer Science 104 2504
[8] Zeng G S,Qu J P 2007 Journal of Applied Polymer Science 106 1152
[9] Zeng G S,Qu J P 2008 Materials Science and Technology 16 235 (in Chinese) [曾广胜、 瞿金平 2008 材材料科学与工艺16 235 ]
[10] Zeng G S,Qu J P,He H Z,Jin G 2007 Journal of Chemical Industry and Engineering 58 3158 (in Chinese) [曾广胜、 瞿金平、 何和智、 晋 刚2007 化工学报 58 3158 ]
[11] Zeng G S,Qu J P,He H Z,Jin G 2007 Journal of Chemical Industry and Engineering 58 3164 (in Chinese) [曾广胜、 瞿金平、 何和智、 晋 刚2007 化工学报 58 3164 ]
[12] Ma LX, Zhang F L,Cui Q, He Y, Zhang P 2005 China Elastomerics 15 44 (in Chinese) [马连湘、 张方良、 崔 琪、 何 燕、 张 萍2005 弹性体 15 44]
[13] Xie F X, Xin Q Y, Gu R M 2007 China Synthetic Rubber Industry 30 306 (in chinese) [谢富霞、 辛泉友、 顾润民 2007 合成橡胶工业 30 306]
[14] He Y, Ma L X, Huang S Y 2007 Tyre Industry 27 451(in Chinese) [何 燕、 马连湘、 黄素逸 2007轮胎工业 27 451]
[15] Xu Z M, Huang P 2006 Acta Phys. Sin.55 2427[许中明、 黄 平 2006 55 2427]
Catalog
Metrics
- Abstract views: 8791
- PDF Downloads: 930
- Cited By: 0
下载:
