-
选择含能聚合物聚叠氮缩水甘油醚(GAP)作为激光烧蚀微推力器的工质,分析了红外染料掺杂对激光烧蚀GAP工质推进性能的影响.通过对比掺杂红外染料GAP在不同激光功率密度、掺杂浓度、靶材厚度和激光烧蚀模式下的推进性能数据和烧蚀羽流,初步探索了掺杂红外染料GAP工质的推进性能优化方式.实验结果表明:透射式激光烧蚀模式下,激光能量的指数衰减特性和掺杂红外染料GAP的强黏性使得烧蚀羽流中易存在未充分烧蚀的工质;GAP的推进性能受红外染料掺杂浓度和靶材厚度的综合影响,当靶材厚度与激光吸收深度接近时,靶材充分吸收激光能量使中心烧蚀区达到化学能释放的温度阈值,同时沿激光传播方向未充分烧蚀的质量最少,此时推进性能达到最优值.反射式下掺杂红外染料的聚合物的激光烧蚀过程遵循先吸收激光能量先喷射的规律,工质分解充分,推进性能优于透射式.The energetic polymer glycidyl azide polymer (GAP) is selected as the propellant of laser ablation micro thruster, and the effect of infrared dye doping on the propelling performance of laser ablative GAP is analyzed. By comparing the propulsion performance data with the plumes of infrared dyes doped GAP under different laser intensities, doping concentrations, target thickness and laser ablation modes, the optimization of the propulsion performance of infrared dye doped GAP is explored preliminarily. The experimental results show that the exponential attenuation characteristics of laser energy and the strong viscosity of GAP doped with infrared dye in the transmission mode lead to the existence of incomplete ablative GAP in the plume. The propulsion performances of GAP are influenced by the doping concentration of infrared dye and the thickness of propellant. Only when the target thickness is close to the laser absorption depth, can the mass of incomplete ablation along the direction of laser propagation be the least and can the laser energy be fully absorbed by the propellant to make the central ablation region reach the temperature threshold of the release of chemical energy. At the same time the optimum value of propulsion performance can be achieved. The GAP doped with infrared dyes in which laser ablation process follows the rule of absorbing laser energy first and spraying first is decomposed adequately under the reflection mode and the propelling performance is better than that in the transmission mode.
-
Keywords:
- glycidyl azide polymer /
- infrared dye /
- laser ablation /
- propelling performance
[1] Phipps C R, Luke J R, Lippert T, Hauer M, Wokaun A 2004 J. Propul. Power 26 1000
[2] Phipps C R, Luke J R 2003 Beamed Energy Propulsion (New York: AIP Publishing) pp230-239
[3] Hong Y J 2013 J. Acad. Equipment 24 57 (in Chinese) [洪延姬 2003 装备学院学报 24 57]
[4] Ye J F, Hong Y J, Wang G Y, Li N L 2011 Chin. Opt. 4 319 (in Chinese) [叶继飞, 洪延姬, 王广宇, 李南雷 2011 中国光学 4 319]
[5] Phipps C R, Birkan M, Bohn W, Eckel H A, Horisawa H, Lippert T, Michaelis M, Rezunkov Y, Sasoh A, Schall W, Scharring S, Sinko J 2010 J. Propul. Power 26 609
[6] Ye J F, Hong Y J, Wang G Y 2009 J. Propul. Technol. 30 751 (in Chinese) [叶继飞, 洪延姬, 王广宇 2009推进技术30 751]
[7] Wang D K, Hong Y J, Wang G Y 2009 Laser J. 30 1 (in Chinese) [王殿恺, 洪延姬, 王广宇2009 激光杂志 30 1]
[8] Zheng Z Y 2015 Laser Plasma Propulsion Technology (Beijing: Science Press) p31 (in Chinese) [郑志远 2015 激光等离子体推进技术 (北京: 科学出版社) 第31页]
[9] Lippert T, Hauer M, Phipps C R, Wokaun A 2003 Appl. Phys. A 77 259
[10] Urech L, Lippert T, Phipps C R, Wokaun A 2007 Appl. Surf. Sci. 253 6409
[11] Urech L, Lippert T, Phipps C R, Wokaun A 2006 Proc. SPIE 6221 626114
[12] Urech L, Lippert T, Phipps C R, Wokaun A 2007 Appl. Surf. Sci. 253 7646
[13] Cai J 2007 Ph. D. Dissertation (Heifei: University of Science and Technology of China) (in Chinese) [蔡建 2007 博士学位论文 (合肥: 中国科学技术大学)]
[14] Chen G, Hong Y J, Ye J F 2016 Phys. Experiment 36 5 (in Chinese) [陈庚, 洪延姬, 叶继飞 2016物理实验36 5]
[15] Anoop N A 2015 Ph. D. Dissertation (Cochin: Cochin University of Science Technology)
[16] Tan R, Lin J, Hughes J, Pakhomov A V 2004 Proceedings of the Second International Symposium on Beamed Energy Propulsion (Sendai: AIP) p122
[17] Zheng Y J, Gong P, Tan R Q, Tang Z P, Ke C J, Cai J, Wan C Y, Hu X J, Yu Y N, Liu S M, Wu J, Zheng G, Zhou J W, L Y 2005 Chin. J. Laser 32 889 (in Chinese) [郑义军, 龚平, 谭荣清, 唐志平, 柯常军, 蔡建, 万重怡, 胡晓军, 于延宁, 刘世明, 吴瑾, 郑光, 周锦文, 吕岩 2005中国激光32 889]
[18] Fardel R, Urech L, Lippert T, Phipps C R, Fitz-Gerald J M, Wokaun A 2009 Appl. Phys. A 94 657
[19] Liu K F 2015 M. S. Thesis (Beijing: Academy of Equipment) (in Chinese) [刘克非 2015 硕士学位论文(北京: 装备学院)
[20] Phipps C R, Luke J R, Mcduff G G, Lippert T 2003 Appl. Phys. A 77 193
[21] Luo L L, Dou Z G, Li N L 2017 Develop. Innovat. Mach. Electr. Products 30 70 (in Chinese) [罗乐乐, 窦志国, 李南雷 2017 机电产品开发与创新 30 70]
[22] Phipps C R, Harrison R F, Shimada T, York G W, Turner T P, Corlis X F, Steele H S, Haynes L C, King T R 1990 Laser Part. Beams 8 281
-
[1] Phipps C R, Luke J R, Lippert T, Hauer M, Wokaun A 2004 J. Propul. Power 26 1000
[2] Phipps C R, Luke J R 2003 Beamed Energy Propulsion (New York: AIP Publishing) pp230-239
[3] Hong Y J 2013 J. Acad. Equipment 24 57 (in Chinese) [洪延姬 2003 装备学院学报 24 57]
[4] Ye J F, Hong Y J, Wang G Y, Li N L 2011 Chin. Opt. 4 319 (in Chinese) [叶继飞, 洪延姬, 王广宇, 李南雷 2011 中国光学 4 319]
[5] Phipps C R, Birkan M, Bohn W, Eckel H A, Horisawa H, Lippert T, Michaelis M, Rezunkov Y, Sasoh A, Schall W, Scharring S, Sinko J 2010 J. Propul. Power 26 609
[6] Ye J F, Hong Y J, Wang G Y 2009 J. Propul. Technol. 30 751 (in Chinese) [叶继飞, 洪延姬, 王广宇 2009推进技术30 751]
[7] Wang D K, Hong Y J, Wang G Y 2009 Laser J. 30 1 (in Chinese) [王殿恺, 洪延姬, 王广宇2009 激光杂志 30 1]
[8] Zheng Z Y 2015 Laser Plasma Propulsion Technology (Beijing: Science Press) p31 (in Chinese) [郑志远 2015 激光等离子体推进技术 (北京: 科学出版社) 第31页]
[9] Lippert T, Hauer M, Phipps C R, Wokaun A 2003 Appl. Phys. A 77 259
[10] Urech L, Lippert T, Phipps C R, Wokaun A 2007 Appl. Surf. Sci. 253 6409
[11] Urech L, Lippert T, Phipps C R, Wokaun A 2006 Proc. SPIE 6221 626114
[12] Urech L, Lippert T, Phipps C R, Wokaun A 2007 Appl. Surf. Sci. 253 7646
[13] Cai J 2007 Ph. D. Dissertation (Heifei: University of Science and Technology of China) (in Chinese) [蔡建 2007 博士学位论文 (合肥: 中国科学技术大学)]
[14] Chen G, Hong Y J, Ye J F 2016 Phys. Experiment 36 5 (in Chinese) [陈庚, 洪延姬, 叶继飞 2016物理实验36 5]
[15] Anoop N A 2015 Ph. D. Dissertation (Cochin: Cochin University of Science Technology)
[16] Tan R, Lin J, Hughes J, Pakhomov A V 2004 Proceedings of the Second International Symposium on Beamed Energy Propulsion (Sendai: AIP) p122
[17] Zheng Y J, Gong P, Tan R Q, Tang Z P, Ke C J, Cai J, Wan C Y, Hu X J, Yu Y N, Liu S M, Wu J, Zheng G, Zhou J W, L Y 2005 Chin. J. Laser 32 889 (in Chinese) [郑义军, 龚平, 谭荣清, 唐志平, 柯常军, 蔡建, 万重怡, 胡晓军, 于延宁, 刘世明, 吴瑾, 郑光, 周锦文, 吕岩 2005中国激光32 889]
[18] Fardel R, Urech L, Lippert T, Phipps C R, Fitz-Gerald J M, Wokaun A 2009 Appl. Phys. A 94 657
[19] Liu K F 2015 M. S. Thesis (Beijing: Academy of Equipment) (in Chinese) [刘克非 2015 硕士学位论文(北京: 装备学院)
[20] Phipps C R, Luke J R, Mcduff G G, Lippert T 2003 Appl. Phys. A 77 193
[21] Luo L L, Dou Z G, Li N L 2017 Develop. Innovat. Mach. Electr. Products 30 70 (in Chinese) [罗乐乐, 窦志国, 李南雷 2017 机电产品开发与创新 30 70]
[22] Phipps C R, Harrison R F, Shimada T, York G W, Turner T P, Corlis X F, Steele H S, Haynes L C, King T R 1990 Laser Part. Beams 8 281
计量
- 文章访问数: 6264
- PDF下载量: 54
- 被引次数: 0