Search

Article

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

Current channel in plasma of inverse exploding planar foils

Liu Yong-Tang Sheng Liang Li Yang Zhang Jin-Hai Ouyang Xiao-Ping

Citation:

Current channel in plasma of inverse exploding planar foils

Liu Yong-Tang, Sheng Liang, Li Yang, Zhang Jin-Hai, Ouyang Xiao-Ping
PDF
HTML
Get Citation
  • In the research of Z-pinch, the initial establishment of current in load, current density distribution mode and current evolution characteristics in different stages are of great significance in studying the development of plasma dynamics, analyzing plasma instability mode, and carrying out the MHD numerical simulation. Thin planar foil is an ideal configuration with continuous two-dimensional structure to study the problem. Based on an ideal model that consists of foil-backpost configuration under the assumption of infinite length in reverse exploding condition, the establishment, distribution and evolution of the current channel, magnetic field distribution characteristics and the force state of foil plasma by the inductive mode are calculated and analyzed theoretically. Relevant experiments are carried out on the QG-1 facility with about 1.4 MA peak current and 100 ns rise time to verify the calculated results. The self-emission graphs of exploding foils are recorded by visible-light frame cameras from side-on view and end-on view. Different load configurations are utilized including symmetric and asymmetric condition both assembled with two 20-μm-thick aluminum foils. The results show that the establishment of the initial current in foil (0–70 ns) accord with the expectation of the inductance model. The inductance feature determines the distribution of the current in this stage, which causes the current to aggregate in foil edges and then the edges will suffer much higher magnetic field and J × B force than the center. This results in the formation of a clamp plasma morphology. The later images (70–120 ns) show that the intense emission region will transfer from the foil edges to the center, which proves a transfer of current channel. So the magnetic field and J × B force in the foil center increase and a peak convex plasma morphology forms then. It shows that the current distribution will be affected by the plasma evolution process. The convergence process of ablated plasma with current finally leads to rapidly switch the current channel (in 60–80 ns).
      Corresponding author: Sheng Liang, shengliang@tsinghua.org.cn
    • Funds: Project supported by the National Natural Science Foundation of China (Grant No. 11575147).
    [1]

    Ryutov D D, Derzon M S, Matzen M K 2000 Rev. Mod. Phys. 72 167Google Scholar

    [2]

    Haines M G 2011 Plasma Phys. Controlled Fusion 53 093001Google Scholar

    [3]

    Chittenden J P, Lebedev S V, Bland S N, Ruiz-Camacho J, Beg F N, Haines M G 2001 Laser Part. Beams 19 323Google Scholar

    [4]

    Zhigalin A S, Rousskikh A G, Oreshkin V I, Chaikovsky S A, Ratakhin N A, Kuznetsov V V 2014 International Congress On Energy Fluxes And Radiation Effects Tomsk, Russia, September 21–26, 2014 012027

    [5]

    Oreshkin V I 2008 Phys. Plasmas 15 092103Google Scholar

    [6]

    丁宁, 张扬, 刘全, 肖德龙, 束小健, 宁成 2009 58 1083Google Scholar

    Ding N, Zhang Y, Liu Q, Xiao D L, Shu X J, Ning C 2009 Acta Phys. Sin 58 1083Google Scholar

    [7]

    Lebedev S V, Beg F N, Bland S N, Chittenden J P, Dangor A E, Haines M G, Pikuz S A, Shelkovenko T A 2001 Laser Part. Beams 19 355Google Scholar

    [8]

    Jones B, Deeney C, McKenney J L, Garasi C J, Mehlhorn T A, Robinson A C, Wunsch S E, Bland S N, Lebedev S V, Chittenden J P, Bott S C, Ampleford D J, Palmer J B, Rapley J, Hall G N, Oliver B V 2005 Phys. Rev. Lett. 95 225001Google Scholar

    [9]

    Chittenden J P, Jennings C A 2008 Phys. Rev. Lett. 101 055005Google Scholar

    [10]

    Sinars D B, Slutz S A, Herrmann M C, McBride R D, Cuneo M E, Peterson K J, Vesey R A, Nakhleh C, Blue B E, Killebrew K, Schroen D, Tomlinson K, Edens A D, Lopez M R, Smith I C, Shores J, Bigman V, Bennett G R, Atherton B W, Savage M, Stygar W A, Leifeste G T, Porter J L 2010 Phys. Rev. Lett. 105 185001Google Scholar

    [11]

    Lebedev S V, Beg F N, Bland S N, Chittenden J P, Dangor A E, Haines M G, Kwek K H, Pikuz S A, Shelkovenko T A 2001 Phys. Plasmas 8 3734Google Scholar

    [12]

    Bland S N, Lebedev S V, Chittenden J P, Ampleford D J, Tang G 2004 Phys. Plasmas 11 4911Google Scholar

    [13]

    刘永棠, 盛亮, 李阳, 张金海, 孟伦, 李豪卿, 袁媛, 孙铁平, 欧阳晓平 2021 70 065203Google Scholar

    Liu Y T, Sheng L, Li Y, Zhang J H, Meng L, Li H Q, Yuan Y, Sun T P, Ouyang X P 2021 Acta Phys. Sin. 70 065203Google Scholar

    [14]

    Mikitchuk D, Cvejic M, Doron R, Kroupp E, Stollberg C, Maron Y, Velikovich A L, Ouart N D, Giulianli J L, Mehlhorn T A, Yu E P, Fruchtman A 2019 Phys. Rev. Lett. 122 045001Google Scholar

    [15]

    Lebedev S V, Beg F N, Bland S N, Chittenden J P, Dangor A E, Haines M G, Pikuz S A, Shelkovenko T A 2000 Phys. Rev. Lett. 85 98Google Scholar

    [16]

    孟伦 2018 硕士学位论文(长沙: 国防科技大学)

    Meng L 2018 M. S. Thesis (Changsha: National University of Defense Technology) (in Chinese)

    [17]

    Clayson T, Lebedev S V, Suzuki-Vidal F, Burdiak G C, Halliday J W D, Hare J D, Ma J, Suttle L G, Tubman E R 2018 IEEE Trans. Plasma Sci. 46 3734Google Scholar

    [18]

    Burdiak G C, Lebedev S V, Bland S N, Clayson T, Hare J, Suttle L, Suzuki-Vidal F, Garcia D C, Chittenden J P, Bott-Suzuki S, Ciardi A, Frank A, Lane T S 2017 Phys. Plasmas 24 072713Google Scholar

    [19]

    Lebedev S V, Frank A, Ryutov D D 2019 Rev. Mod. Phys. 91 025002Google Scholar

    [20]

    Bott-Suzuki S C, Caballero Bendixsen L S, Cordaro S W, Blesener I C, Hoyt C L, Cahill A D, Kusse B R, Hammer D A, Gourdain P A, Seyler C E, Greenly J B, Chittenden J P, Niasse N, Lebedev S V, Ampleford D J 2015 Phys. Plasmas 22 052710Google Scholar

    [21]

    盛亮 2007 博士学位论文 (北京: 清华大学)

    Sheng L 2007 Ph. D. Dissertation (Beijing: Tsinghua University) (in Chinese)

    [22]

    Davis J, Gondarenko N A, Velikovich A L 1997 Appl. Phys. Lett. 70 170Google Scholar

    [23]

    Strickler T S, Gilgenbach R M, Johnston M D, Yue Ying L 2003 IEEE Trans. Plasma Sci. 31 1384Google Scholar

    [24]

    王亮平, 韩娟娟, 吴坚, 郭宁, 吴刚, 李岩, 邱爱慈 2010 59 8685Google Scholar

    Wang L P, Han J J, Wu J, Guo N, Wu G, Li Y, Qiu A C 2010 Acta Phys. Sin 59 8685Google Scholar

    [25]

    Esaulov A A, Velikovich A L, Kantsyrev V L, Mehlhorn T A, Cuneo M E 2006 Phys. Plasmas 13 120701Google Scholar

    [26]

    Esaulov A A, Kantsyrev V L, Safronova A S, Velikovich A L, Cuneo M E, Jones B, Struve K W, Mehlhorn T A 2008 Phys. Plasmas 15 052703Google Scholar

    [27]

    Velikovich A L, Sokolov I V, Esaulov A A 2002 Phys. Plasmas 9 1366Google Scholar

    [28]

    Hu Min, Kusse B R 2005 Phys. Plasmas 12 102701Google Scholar

  • 图 1  诊断系统光路示意图与负载装配结构图

    Figure 1.  Optical path of the diagnostic system and assembled load diagram.

    图 2  不同结构负载侧向激光阴影图示 (a) 对称型薄膜负载; (b) 非对称型薄膜负载

    Figure 2.  Side-on laser shadow graphs of the experimental load with different structures: (a) Symmetric load; (b) asymmetric load.

    图 3  单侧薄膜-回流柱负载模型轴向图示. 电流方向为从薄膜底部流入顶部流出, 然后向下流进回流柱. w为回流柱宽度, b为薄膜宽度, d为两者间距. x为微元横坐标, x′为矢势研究点横坐标, R为微元与研究点间距, iα为薄膜面电流密度大小, iβ为回流柱边界处面电流密度大小. δα为薄膜载流厚度, δβ 为回流柱边界趋肤深度

    Figure 3.  Diagram of 2-D foil-backpost geometry of axial direction view. Current flows into the foil from the bottom and flows out of the foil down to the return current post. w is the width of the return current post, b is the width of the foil, d is the distance between foil and post. x is the coordinate of the element, x' is the coordinate of the studied point, R is the distance between the element and studied point, iα is the surface current density of the foil and iβ is that of the backpost. δα is the flowing depth of current in the foil and δβ is that of the post boundary.

    图 4  无限长有限宽理想平板构型在电流均匀分布假设下, 平板所在平面总磁感应强度分布. 载流厚度δ为20 μm, 平板范围为–5—5 mm, 平均电流密度大小为ja. 蓝色曲线为平板模型理论公式计算结果, 红色点集为单排电流柱微元近似薄膜微元下的数值计算结果

    Figure 4.  Assuming equal distribution of current, calculated numerical B-field on slab by single-row model comparing to the theoretical value. Current depth is 20 μm, slab region is from –5 to 5 mm and ja is the average current density. Blue line is the numerical result and red plots are the theoretical result.

    图 5  双侧薄膜结构负载模型轴向示意图. d1为远端薄膜距回流柱边界距离, d3为近端薄膜距回流柱边界距离, d2为回流柱宽度. i 为面电流密度, δ 为载流厚度, 其下标α1, β1, α2, β2分别对应薄膜1、回流柱界面1、薄膜2和回流柱界面2

    Figure 5.  Diagram of the load structure with double foils from axial view. d1 is the distance between the further side foil α1 and post boundary β1, d3 is the distance between the other side foil α2 and post boundary β2, d2 is the width of the return current post, i is the surface current density, δ is the current depth where subscripts α1, β1, α2, β2 correspond to foil-1, post boundary-1, foil-2, post boundary-2, respectively

    图 6  双侧对称型结构负载电流密度分布(d1 = 5 mm, d2 = 10 mm, d3 = 5 mm, 对应于图5结构. 其中红色(与黑色重合)对应薄膜α1, α2, 蓝色(与绿色重合)对应回流柱界面β1, β2) (a) 无偏置; (b) 薄膜左偏置0.3 mm

    Figure 6.  Distribution of surface current density of the symmetric load structure with double foils. d1 = 5 mm, d2 = 10 mm, d3 = 5 mm corresponding to the parameters in Fig. 5. Red (black) lines represent the foil α1 and foil α2, blue (green) lines represent the backpost boundary β1 and backpost boundary β2, respectively. (a) The foil is loaded in the center; (b) the foil has an initial 0.3 mm offset on the left.

    图 7  双侧非对称型结构负载电流分布(d1 = 15 mm, d2 = 10 mm, d3 = 5 mm, 对应于图5结构. 其中红色对应薄膜α1, 黑色对应薄膜α2, 蓝色对应回流柱面β1, 绿色对应回流柱面β2) (a) 无偏置; (b) 左偏置0.3 mm

    Figure 7.  Distribution of surface current density of the asymmetric load structure with double foils. d1 = 15 mm, d2 = 10 mm, d3 = 5 mm corresponding to the parameters in Fig. 5. Red, black, blue, green lines represent the foil α1, foil α2, backpost boundary β1, backpost boundary β2, respectively. (a) The foil is loaded in the center; (b) the foil is set an initial 0.3 mm offset on the left.

    图 8  不同模式下的薄膜各部分电流密度分布、薄膜总磁场强度分布、总受力分布与力矢量特征 (a) 电感主导模式; (b) 平均电流密度分布模式; (c) 中心汇聚型电流密度分布模式(高斯分布假设). 其中ja为薄膜平均电流密度, δ为薄膜载流厚度, μ0为真空磁导率, F为总受力大小, fx为局部受力的横向分量, fy为纵向分量

    Figure 8.  Curves of current distribution, magnitude of B-field, magnitude of force and vectors of force along the foil: (a) Based on current division model that inductance dominates; (b) based on equal current division model; (c) based on current division model that its density concentrates on the center (assuming Gaussian distribution of current).

    图 9  双侧对称型铝膜负载实验侧向可见光辐射图像(No. 17222) (a) 初始激光阴影图; (b) 26.6 ns时刻图; (c) 60.4 ns时刻图.

    Figure 9.  Optical side-on self-emission images for the symmetric structure load with double foils (No. 17222): (a) Laser shadow graph of load in the initial condition; (b) exploding time at 26.6 ns; (c) exploding time at 60.4 ns.

    图 10  双侧对称型铝膜负载实验轴向可见光图像(No. 19103) (a) 27 ns; (b) 67 ns; (c)局部薄膜发光伪色图与对应位置相对强度曲线, G为相对灰度值

    Figure 10.  Optical end-on self-emission images for the symmetric structure load with double foils (No. 19103): (a) Shot time at 27 ns; (b) shot time at 67 ns; (c) the image in yellow box is treated with flase color. Corresponding mean column gray value curve G with position x is calculated on the top.

    图 11  双侧非对称铝膜负载实验侧向可见光辐射图像(No. 16189) (a) 初始时刻, 薄膜1对应远端位置, 薄膜2对应近端位置; (b) 49.8 ns; (c) 70.8 ns

    Figure 11.  Optical side-on self-emission images for the asymmetric structure load with double foils set in different distance (No. 16189): (a) Laser shadow graph of load in the initial condition, foil 1 corresponds to the far side and foil 2 corresponds to the near side; (b) shot time at 49.8 ns; (c) shot time at 70.8 ns.

    图 12  双侧非对称铝膜负载实验轴向可见光辐射图像(No. 16214) (a) 12.6 ns; (b) 33.6 ns; (c) 75.6 ns. 薄膜1对应远端位置, 薄膜2对应近端位置

    Figure 12.  Optical end-on self-emission images for the asymmetric structure load with double foils (No. 16214): (a) Shot time at 12.6 ns; (b) shot time at 33.6 ns; (c) shot time at 75.6 ns. Foil 1 corresponds to the far side, and foil 2 corresponds to the near side.

    图 13  双侧对称型铝膜负载实验轴向可见光图像(No. 19110) (a) 79 ns; (b) 99 ns; (c) 119 ns

    Figure 13.  Optical end-on self-emission images for the symmetric structure load with double foils (No. 19110): (a) Shot time at 79 ns; (b) shot time at 99 ns; (c) shot time at 119 ns.

    图 14  20 μm铝膜电爆炸过程轴向可见光自辐射诊断图像序列. 图像经过伪色处理, 相对灰度值与伪色域对应关系如右侧标尺所示

    Figure 14.  Diagnosed images sequence of axial visible end-on self-emission in exploding experiments of 20 μm Al foils. Images are treated with false-color where color scale is shown on the right.

    图 15  20 μm铝膜电爆炸过程截面可见光自辐射诊断图像序列. 图像经过了伪色处理, 相对灰度值与伪色域对应关系如右侧标尺所示. 相机拍摄方向与薄膜界面法向成45°

    Figure 15.  Diagnosed images sequence of surface self-emission in exploding experiments of 20 μm Al foils. Images are treated with false-color where color scale is shown on the right. The shooting angle are 45° relative to foil surface orientation.

    图 16  阴极片结构设计 (a) 常规结构; (b) 内凹型结构: (c) 外凸型结构. 阴影区为与回流柱连接区, 蓝色区域为薄膜连接区

    Figure 16.  Different designed cathode plate structure: (a) Normal structure; (b) inner fovea structure; (c) outer fovea structure. Shadow regions connect the backpost and blue regions connect metal foils.

    表 1  反场构型平面薄膜负载参数

    Table 1.  Parameters of the planar foils.

    负载结构
    类型
    材料M膜厚
    h/μm
    膜宽b/mm膜长
    l/mm
    回流柱厚d2/mm边界距1
    d1/mm
    边界距2
    d3/mm
    双侧对称型2010201055
    双侧异距型20102010155
    DownLoad: CSV
    Baidu
  • [1]

    Ryutov D D, Derzon M S, Matzen M K 2000 Rev. Mod. Phys. 72 167Google Scholar

    [2]

    Haines M G 2011 Plasma Phys. Controlled Fusion 53 093001Google Scholar

    [3]

    Chittenden J P, Lebedev S V, Bland S N, Ruiz-Camacho J, Beg F N, Haines M G 2001 Laser Part. Beams 19 323Google Scholar

    [4]

    Zhigalin A S, Rousskikh A G, Oreshkin V I, Chaikovsky S A, Ratakhin N A, Kuznetsov V V 2014 International Congress On Energy Fluxes And Radiation Effects Tomsk, Russia, September 21–26, 2014 012027

    [5]

    Oreshkin V I 2008 Phys. Plasmas 15 092103Google Scholar

    [6]

    丁宁, 张扬, 刘全, 肖德龙, 束小健, 宁成 2009 58 1083Google Scholar

    Ding N, Zhang Y, Liu Q, Xiao D L, Shu X J, Ning C 2009 Acta Phys. Sin 58 1083Google Scholar

    [7]

    Lebedev S V, Beg F N, Bland S N, Chittenden J P, Dangor A E, Haines M G, Pikuz S A, Shelkovenko T A 2001 Laser Part. Beams 19 355Google Scholar

    [8]

    Jones B, Deeney C, McKenney J L, Garasi C J, Mehlhorn T A, Robinson A C, Wunsch S E, Bland S N, Lebedev S V, Chittenden J P, Bott S C, Ampleford D J, Palmer J B, Rapley J, Hall G N, Oliver B V 2005 Phys. Rev. Lett. 95 225001Google Scholar

    [9]

    Chittenden J P, Jennings C A 2008 Phys. Rev. Lett. 101 055005Google Scholar

    [10]

    Sinars D B, Slutz S A, Herrmann M C, McBride R D, Cuneo M E, Peterson K J, Vesey R A, Nakhleh C, Blue B E, Killebrew K, Schroen D, Tomlinson K, Edens A D, Lopez M R, Smith I C, Shores J, Bigman V, Bennett G R, Atherton B W, Savage M, Stygar W A, Leifeste G T, Porter J L 2010 Phys. Rev. Lett. 105 185001Google Scholar

    [11]

    Lebedev S V, Beg F N, Bland S N, Chittenden J P, Dangor A E, Haines M G, Kwek K H, Pikuz S A, Shelkovenko T A 2001 Phys. Plasmas 8 3734Google Scholar

    [12]

    Bland S N, Lebedev S V, Chittenden J P, Ampleford D J, Tang G 2004 Phys. Plasmas 11 4911Google Scholar

    [13]

    刘永棠, 盛亮, 李阳, 张金海, 孟伦, 李豪卿, 袁媛, 孙铁平, 欧阳晓平 2021 70 065203Google Scholar

    Liu Y T, Sheng L, Li Y, Zhang J H, Meng L, Li H Q, Yuan Y, Sun T P, Ouyang X P 2021 Acta Phys. Sin. 70 065203Google Scholar

    [14]

    Mikitchuk D, Cvejic M, Doron R, Kroupp E, Stollberg C, Maron Y, Velikovich A L, Ouart N D, Giulianli J L, Mehlhorn T A, Yu E P, Fruchtman A 2019 Phys. Rev. Lett. 122 045001Google Scholar

    [15]

    Lebedev S V, Beg F N, Bland S N, Chittenden J P, Dangor A E, Haines M G, Pikuz S A, Shelkovenko T A 2000 Phys. Rev. Lett. 85 98Google Scholar

    [16]

    孟伦 2018 硕士学位论文(长沙: 国防科技大学)

    Meng L 2018 M. S. Thesis (Changsha: National University of Defense Technology) (in Chinese)

    [17]

    Clayson T, Lebedev S V, Suzuki-Vidal F, Burdiak G C, Halliday J W D, Hare J D, Ma J, Suttle L G, Tubman E R 2018 IEEE Trans. Plasma Sci. 46 3734Google Scholar

    [18]

    Burdiak G C, Lebedev S V, Bland S N, Clayson T, Hare J, Suttle L, Suzuki-Vidal F, Garcia D C, Chittenden J P, Bott-Suzuki S, Ciardi A, Frank A, Lane T S 2017 Phys. Plasmas 24 072713Google Scholar

    [19]

    Lebedev S V, Frank A, Ryutov D D 2019 Rev. Mod. Phys. 91 025002Google Scholar

    [20]

    Bott-Suzuki S C, Caballero Bendixsen L S, Cordaro S W, Blesener I C, Hoyt C L, Cahill A D, Kusse B R, Hammer D A, Gourdain P A, Seyler C E, Greenly J B, Chittenden J P, Niasse N, Lebedev S V, Ampleford D J 2015 Phys. Plasmas 22 052710Google Scholar

    [21]

    盛亮 2007 博士学位论文 (北京: 清华大学)

    Sheng L 2007 Ph. D. Dissertation (Beijing: Tsinghua University) (in Chinese)

    [22]

    Davis J, Gondarenko N A, Velikovich A L 1997 Appl. Phys. Lett. 70 170Google Scholar

    [23]

    Strickler T S, Gilgenbach R M, Johnston M D, Yue Ying L 2003 IEEE Trans. Plasma Sci. 31 1384Google Scholar

    [24]

    王亮平, 韩娟娟, 吴坚, 郭宁, 吴刚, 李岩, 邱爱慈 2010 59 8685Google Scholar

    Wang L P, Han J J, Wu J, Guo N, Wu G, Li Y, Qiu A C 2010 Acta Phys. Sin 59 8685Google Scholar

    [25]

    Esaulov A A, Velikovich A L, Kantsyrev V L, Mehlhorn T A, Cuneo M E 2006 Phys. Plasmas 13 120701Google Scholar

    [26]

    Esaulov A A, Kantsyrev V L, Safronova A S, Velikovich A L, Cuneo M E, Jones B, Struve K W, Mehlhorn T A 2008 Phys. Plasmas 15 052703Google Scholar

    [27]

    Velikovich A L, Sokolov I V, Esaulov A A 2002 Phys. Plasmas 9 1366Google Scholar

    [28]

    Hu Min, Kusse B R 2005 Phys. Plasmas 12 102701Google Scholar

  • [1] Chang Shuai-Jun, Ma Hai-Lun, Li Hao, Ou Shu-Ji, Guo Jian-Fei, Zhong Ming-Hao, Liu Li. A novel 4H-SiC ESD protection device with improved robustness. Acta Physica Sinica, 2022, 71(19): 198501. doi: 10.7498/aps.71.20220879
    [2] Liu Yong-Tang, Sheng Liang, Li Yang, Zhang Jin-Hai, Meng Lun, Li Hao-Qing, Yuan Yuan, Sun Tie-Ping, Ouyang Xiao-Ping. Explosion of thin flat foils with periodical modified structure. Acta Physica Sinica, 2021, 70(6): 065203. doi: 10.7498/aps.70.20201574
    [3] Study of the current channel in plasma of inverse exploding planar foils. Acta Physica Sinica, 2021, (): . doi: 10.7498/aps.70.20211495
    [4] Cui Xiang. Magnetic field and inductance of filament conductor segment model with current continuity. Acta Physica Sinica, 2020, 69(3): 034101. doi: 10.7498/aps.69.20191212
    [5] Zhang Xing-Yu. Effects of current density on fracture behaviors for micron-sized crystalline silicon electrodes. Acta Physica Sinica, 2020, 69(24): 248201. doi: 10.7498/aps.69.20200915
    [6] Zhao Xiao-Ming, Sun Qi-Zhi, Fang Dong-Fan, Jia Yue-Song, Liu Zheng-Fen, Sun Cheng-Wei. Numerical solutions of Grad-Shafranov equation in a field-reversed configuration. Acta Physica Sinica, 2016, 65(18): 185201. doi: 10.7498/aps.65.185201
    [7] Li Zhen-Hua, Zhou Guo-Hua, Liu Xiao-Tian, Leng Min-Rui. Dynamical modeling and analysis of buck converter operating in pseudo-continuous conduction mode. Acta Physica Sinica, 2015, 64(18): 180501. doi: 10.7498/aps.64.180501
    [8] Wang Yi-Jun, Cheng Yan. Field-emission current densities of carbon nanotube under the different electric fields. Acta Physica Sinica, 2015, 64(19): 197304. doi: 10.7498/aps.64.197304
    [9] Sha Jin, Xu Jian-Ping, Xu Li-Jun, Zhong Shu. Multi-period analysis of current-mode pulse-train controlled continuous conduction mode converter. Acta Physica Sinica, 2014, 63(24): 248401. doi: 10.7498/aps.63.248401
    [10] Tan Cheng, Liang Zhi-Shan, Zhang Ju-Qiu. Non-linear control for the fractional boost converter in pseudo continuous conduction mode. Acta Physica Sinica, 2014, 63(20): 200502. doi: 10.7498/aps.63.200502
    [11] Tan Cheng, Liang Zhi-Shan. Modeling and simulation analysis of fractional-order Boost converter in pseudo-continuous conduction mode. Acta Physica Sinica, 2014, 63(7): 070502. doi: 10.7498/aps.63.070502
    [12] Du Yin-Chang, Cao Jin-Xiang, Wang Jian, Zheng Zhe, Liu Yu, Meng Guang, Ren Ai-Min, Zhang Sheng-Jun. Mode transition of inductively coupled plasma in interlayer chamber. Acta Physica Sinica, 2012, 61(19): 195206. doi: 10.7498/aps.61.195206
    [13] Wang Fa-Qiang, Ma Xi-Kui. Fractional order modeling and simulation analysis of Boost converter in continuous conduction mode operation. Acta Physica Sinica, 2011, 60(7): 070506. doi: 10.7498/aps.60.070506
    [14] Sun Fu-Yu, Wu Zhen-Hua, Zhang Kai-Chun. Design of a high current density cylindrical electron optics system. Acta Physica Sinica, 2010, 59(3): 1721-1725. doi: 10.7498/aps.59.1721
    [15] Ding Ning, Zhang Yang, Liu Quan, Xiao De-Long, Shu Xiao-Jian, Ning Cheng. Effects of various inductances on the dynamic models of the Z-pinch implosion of nested wire arrays. Acta Physica Sinica, 2009, 58(2): 1083-1090. doi: 10.7498/aps.58.1083
    [16] Wang Xin-Qing, Li Liang, Chu Ning-Jie, Jin Hong-Xiao, Ge Hong-Liang. Theoretical optimization for field emission current density from carbon nanotubes array. Acta Physica Sinica, 2008, 57(11): 7173-7177. doi: 10.7498/aps.57.7173
    [17] Liu Long-Ping, Zhao Zhen-Jie, Huang Can-Xing, Wu Zhi-Ming, Yang Xie-Long. Analysis of current-density distribution and giant magnetoimpedance effect in composite wires. Acta Physica Sinica, 2006, 55(4): 2014-2020. doi: 10.7498/aps.55.2014
    [18] Wu Han-Hua, Wang Jian-Bo, Long Bei-Yu, Lü Xian-Yi, Long Bei-Hong, Jin Zeng-Sun, Bai Yi-Zhen, Bi Dong-Mei. Effect of current density on physical and chemical properties of microarc oxidation coatings of aluminium alloy. Acta Physica Sinica, 2005, 54(12): 5743-5749. doi: 10.7498/aps.54.5743
    [19] SUN JUN-SHENG, WU CHUAN-SONG. THE INFLUENCE OF WELDPOOL SURFACE SHAPE ON THE DISTRIBUTION OF ARC CURRENT DENSI TY. Acta Physica Sinica, 2000, 49(12): 2427-2432. doi: 10.7498/aps.49.2427
    [20] GU SHI-JIE, HUO CHONG-RU. PROFILES OF JUNCTION CURRENT AND CARRIER-CONCEN-TRATION IN GaAs INJECTION LASERS WITH FILAMENT. Acta Physica Sinica, 1979, 28(1): 21-32. doi: 10.7498/aps.28.21
Metrics
  • Abstract views:  3975
  • PDF Downloads:  44
  • Cited By: 0
Publishing process
  • Received Date:  12 August 2021
  • Accepted Date:  14 September 2021
  • Available Online:  21 January 2022
  • Published Online:  05 February 2022

/

返回文章
返回
Baidu
map