-
Based on the features of DE-GMAW (double electrode gas metal arc welding), a new hybrid heat-source model that is suited for the DE-GMAW is established. Using this heat-source model, the temperature fields of DE-GMAW wtih different welding parameters are simulated. According to the simulation results with different welding parameters, in this article we analyze the influence of welding parameters on the heat input of base metal in DE-GMAW. To verify the rationality of the hybrid heat-source model of DE-GMAW, the simulation results of the temperature field are compared with the results obtained from the experiment that is carried out under the same condition. The research results indicate that under the same total current, the heat input of base metal decreases gradually with the increase of by-pass current. Moreover, the closer to the welding line the greater the decrease rate of the heat input of base metal is. The study and the comparison of the thermal cycle curve of measured points show that the simulation results are in good agreement with the experimental results. These results indicate that the temperature field model is accurate and the hybrid heat-source model is reasonable.
[1] Zhang Y M, Jiang M, Lu W 2004 Welding Journal 83 39
[2] Shi Y, Liu X P, Zhang Y M 2008 Welding Journal 87 229
[3] Wu C S,Zhang M X,Li K H,Zhang Y M 2007 Acta Metallurgica Sinica 43 663 (in Chinese) [武传松, 张明贤, 李克海, 张裕明 2007 金属学报 43 663]
[4] Liu H, Ke F J, Pan H, Zhou M 2007 Acta Phys. Sin. 56 407 (in Chinese) [刘浩, 柯孚久, 潘晖, 周敏 2007 56 407]
[5] Zhang M X,Wu C S, Li K H,Zhang Y M 2007 Transactions of the China Welding Institution 28 33 (in Chinese) [张明贤, 武传松, 李克海张, 张裕明 2007 焊接学报 28 33]
[6] Brickstad B, Josefson B L 1998 International Journal of Pressure Vessele and Piping 75 11
[7] Wu C S 2007 Welding Thermal Processes and Weld Pool Behaviors (Beijing: China Machine Press) p122—124 (in Chinese) [武传松 2007 焊接热过程与熔池形态 (北京: 机械工业出版社) 第122—124页]
[8] Edson C S 2006 International Journal of Machine Tools and Manufacture 46 1459
[9] Lu S P, Dong W C, Li D Z, Li Y Y 2009 Acta Phys. Sin. 58 s95 (in Chinese) [陆善平, 董文超, 李殿中, 李依依 2009 58 s95]
-
[1] Zhang Y M, Jiang M, Lu W 2004 Welding Journal 83 39
[2] Shi Y, Liu X P, Zhang Y M 2008 Welding Journal 87 229
[3] Wu C S,Zhang M X,Li K H,Zhang Y M 2007 Acta Metallurgica Sinica 43 663 (in Chinese) [武传松, 张明贤, 李克海, 张裕明 2007 金属学报 43 663]
[4] Liu H, Ke F J, Pan H, Zhou M 2007 Acta Phys. Sin. 56 407 (in Chinese) [刘浩, 柯孚久, 潘晖, 周敏 2007 56 407]
[5] Zhang M X,Wu C S, Li K H,Zhang Y M 2007 Transactions of the China Welding Institution 28 33 (in Chinese) [张明贤, 武传松, 李克海张, 张裕明 2007 焊接学报 28 33]
[6] Brickstad B, Josefson B L 1998 International Journal of Pressure Vessele and Piping 75 11
[7] Wu C S 2007 Welding Thermal Processes and Weld Pool Behaviors (Beijing: China Machine Press) p122—124 (in Chinese) [武传松 2007 焊接热过程与熔池形态 (北京: 机械工业出版社) 第122—124页]
[8] Edson C S 2006 International Journal of Machine Tools and Manufacture 46 1459
[9] Lu S P, Dong W C, Li D Z, Li Y Y 2009 Acta Phys. Sin. 58 s95 (in Chinese) [陆善平, 董文超, 李殿中, 李依依 2009 58 s95]
Catalog
Metrics
- Abstract views: 7820
- PDF Downloads: 687
- Cited By: 0
下载:
