搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

氮化硼纳米管表面结构设计及其对环氧复合电介质性能调控机理

任俊文 姜国庆 陈志杰 魏华超 赵莉华 贾申利

引用本文:
Citation:

氮化硼纳米管表面结构设计及其对环氧复合电介质性能调控机理

任俊文, 姜国庆, 陈志杰, 魏华超, 赵莉华, 贾申利

Surface structure design of boron nitride nanotubes and mechanism of their regulation on properties of epoxy composite dielectric

Ren Jun-Wen, Jiang Guo-Qing, Chen Zhi-Jie, Wei Hua-Chao, Zhao Li-Hua, Jia Shen-Li
PDF
HTML
导出引用
  • 向环氧树脂基体中加入纳米填料是实现其多功能化的常用手段, 其中拥有一维纳米结构的氮化硼纳米管 (BNNTs), 因具有超高导热系数、宽能级带隙、高长径比、高力学强度而备受关注. 然而, 表面惰性、易团聚、与环氧树脂之间界面作用弱等缺点极大地制约了BNNTs进一步应用. 基于此, 本文提出采用表面包覆介孔二氧化硅 (mSiO2), 并接枝硅烷偶联剂功能分子的方法, 优化BNNTs表面特性. 结果表明, 通过表面结构设计及功能化, 可显著改善BNNTs的分散特性, 提升其与环氧树脂的界面作用. 以此所制备的环氧复合电介质可实现力学韧性和导热系数的同步提升, 并兼具较低的介电常数与损耗. 此外, mSiO2独特的纳米介孔结构赋予复合电介质大量的深陷阱, 有效阻碍了电子的迁移, 进而提高复合电介质的电气强度. 本文为环氧树脂的多功能化提供了新思路, 亦对揭示纳米填料表面特性-复合电介质微观结构-宏观性能之间的关联关系提供了一定实验数据支撑.
    Adding nanofillers into epoxy resin matrices is a common method to achieve their multi-function. Boron nitride nanotubes (BNNTs) with one-dimensional nanostructures have attracted much attention because of their ultra-high thermal conductivity, wide energy level band gap, high aspect ratio and mechanical strength. Yet, the strong π-π non-covalent bonding and lip-lip interactions make BNNTs prone to agglomeration in the epoxy resin matrix. Moreover, the different physicochemical properties of BNNTs and epoxy resins as well as the chemical inertness of BNNTs surface lead to the lack of effective interfacial interaction between BNNTs and epoxy resin matrix. Therefore, the performance of the epoxy composite dielectric is not enhanced by simple blending solely, but will even have the opposite effect. To address the problems of BNNTs, in this study, the surface structure of BNNTs is constructed from the perspective of interface modulation by using sol-gel method to coat mesoporous silica (mSiO2) on BNNTs’ surface and further introducing silane coupling agent (KH560). The results indicate that the surface structure of BNNTs can optimize the level of interfacial interaction between BNNTs and epoxy resin matrix, which leads to stronger interfacial connection and elimination of internal pore phenomenon. The dielectric constant and loss of the composite dielectric prepared in this way are further reduced, reaching 4.1 and 0.005 respectively at power frequency, which is significantly lower than that of pure epoxy resin. At the same time, the mechanical toughness (3.01 MJ/m3) and thermal conductivity (0.34 W/(m⋅K)) are greatly improved compared with the counterparts of pure epoxy resin. In addition, the unique nano-mesoporous structure of mSiO2 endows the composite dielectric with a large number of deep traps, which effectively hinders the migration of electrons, thereby improving the electrical strength of the composite dielectric, and the breakdown field strength reaches 95.42 kV/mm. Furthermore, the interfacial mechanism of BNNTs’ surface structure on dielectric relaxation and trap distribution of composite dielectrics is systematically studied by Tanaka multinuclear model. The above results indicate that the good interfacial interaction between BNNTs and epoxy resin matrix is crucial in establishing the micro-interface structure and improving the macroscopic properties of composite dielectrics. This study presents a novel idea for the multifunctionalities of epoxy resin, and also provides some experimental data support for revealing the correlation among surface properties of nano-fillers, microstructure and macroscopic properties of composite dielectric.
      通信作者: 贾申利, jiashenli@scu.edu.cn
    • 基金项目: 国家自然科学基金(批准号: 52107020)、四川省重点研发项目(批准号: 2023YFG0236)、电力设备电气绝缘国家重点实验室开放基金(批准号: EIPE23210)和中国博士后科学基金(批准号: 2018M643475)资助的课题.
      Corresponding author: Jia Shen-Li, jiashenli@scu.edu.cn
    • Funds: Project supported by the National Natural Science Foundation of China (Grant No. 52107020), the Key R&D Projects in Sichuan Province, China (Grant No. 2023YFG0236), the State Key Laboratory of Electrical Insulation of Power Equipment Open Fund, China (Grant No. EIPE23210), and the China Postdoctoral Science Foundation (Grant No. 2018M643475).
    [1]

    张志斌, 任明, 宋波, 陈荣发, 余家赫, 范文杰, 董明 2022 中国电机工程学报 42 1690Google Scholar

    Zhang Z B, Ren M, Song B, Chen R F, Yu J H, Fan W J, Dong M 2022 Proc. CSEE 42 1690Google Scholar

    [2]

    周远翔, 刘轩昊, 朱小倩, 卢毅, 高岩峰 2023 高电压技术 49 2891Google Scholar

    Zhou Y X, Liu X H, Zhu X Q, Lu Y, Gao Y F 2023 High Volt. Eng. 49 2891Google Scholar

    [3]

    Yuan S J, Peng Z Q, Rong M Z, Zhang M Q 2022 Mater. Chem. Front. 6 1137Google Scholar

    [4]

    Chen J, Zhou Y, Huang X Y, Yu C Y, Han D L, Wang A, Zhu Y K, Shi K M, Kang Q, Li P L, Jiang P K, Qian X S, Bao H, Li S T, Wu G N, Zhu X Y, Wang Q 2023 Nature 615 62Google Scholar

    [5]

    Bertasius P, Shneider M, Macutkevic J, Samulionis V, Banys J, Zak A 2019 J. Nanomater Pt. 4 5761439Google Scholar

    [6]

    Golberg D, Bando Y, Tang C, Zhi C 2007 Adv. Mater. 19 2413Google Scholar

    [7]

    Pan Z, Tao Y, Zhao Y, Fitzgerald M L, McBride J R, Zhu L, Li D 2021 Nano Lett. 21 7317Google Scholar

    [8]

    Zhang S, Chen W J, Zhao Y, Yang K, Du B, Ding L J, Yang W, Wu S Z 2021 Compos. B. Eng. 223 109106Google Scholar

    [9]

    Huang X Y, Zhi C Y, Jiang P K, Golberg D, Bando Y, Tanaka T 2013 Adv. Funct. Mater. 23 1824Google Scholar

    [10]

    Lewis T J 2004 IEEE Trans. Dielectr. Electr. Insul. 11 739Google Scholar

    [11]

    Tanaka T 2005 IEEE Trans. Dielectr. Electr. Insul. 12 914Google Scholar

    [12]

    Tanaka T, Kozako M, Fuse N, Ohki Y 2005 IEEE Trans. Dielectr. Electr. Insul. 12 669Google Scholar

    [13]

    韩延东, 韩明勇, 杨文胜 2021 高等学校化学学报 42 965Google Scholar

    Han Y D, Han M Y, Yang W S 2021 Chem. Res. Chin. Univ. 42 965Google Scholar

    [14]

    杨国清, 戚相成, 高青青, 王德意 2022 高电压技术 48 689Google Scholar

    Yang G Q, Qi X C, Gao Q Q, Wang D Y 2022 High Volt. Eng. 48 689Google Scholar

    [15]

    Amin M S, Molin T E, Tampubolon C, Kranbuehl D E, Schniepp H C 2020 Chem. Mater. 32 9090Google Scholar

    [16]

    Li B, Zeng H C 2018 ACS Appl. Mater. Interfaces 10 29435Google Scholar

    [17]

    李鹏新, 崔浩喆, 邢照亮, 郭宁, 闵道敏 2022 电工技术学报 37 291Google Scholar

    Li P X, Cui H Z, Xing Z L, Guo N, Min D M 2022 Trans. CES. 37 291Google Scholar

    [18]

    查俊伟, 黄文杰, 杨兴, 万宝全, 郑明胜 2023 高电压技术 49 1055Google Scholar

    Zha J W, Huang W J, Yang X, Wan B Q, Zheng M S 2023 High Volt. Eng. 49 1055Google Scholar

    [19]

    Zhao L H, Yan L, Wei C M, Li Q H, Huang X L, Wang Z L, Fu M L, Ren J W 2020 J. Phys. Chem. C 124 12723Google Scholar

    [20]

    Feng Z Q, Liu X H, Zhang W C, Zeng J J, Liu J M, Chen B F, Lin J M, Tan L Q, Liang L Y 2022 J. Mater. Sci. 57 1156Google Scholar

    [21]

    高铭泽, 张沛红 2016 65 247802Google Scholar

    Gao M Z, Zhang P H 2016 Acta Phys. Sin. 65 247802Google Scholar

    [22]

    邹阳, 林锦煌, 何津, 翁祖辰, 金涛 2023 电工技术学报 38 622Google Scholar

    Zhou Y, Lin J H, He J, Wen Z C, Jin T 2023 Trans. CES. 38 622Google Scholar

    [23]

    张涛, 江世杰, 张宁, 任乔林, 肖洒 2022 高电压技术 48 1452Google Scholar

    Zhang T, Jiang S J, Zhang N, Ren Q L, Xiao S 2022 High Volt. Eng. 48 1452Google Scholar

    [24]

    Heileman K, Daoud J, Tabrizian M 2013 Biosens. Bioelectron. 49C 348Google Scholar

    [25]

    Achour M E, Brosseau C, Carmona F 2008 J. Appl. Phys. 103 1277Google Scholar

    [26]

    成鹏飞, 王辉, 李盛涛 2013 62 057701Google Scholar

    Cheng P F, Wang H, Li S T 2013 Acta Phys. Sin. 62 057701Google Scholar

    [27]

    Ibragimov T D, Ramazanova I S, Yusifova U V, Rzayev R M 2023 Integr. Ferroelectr. 231 1Google Scholar

    [28]

    肖异瑶, 周求宽, 宴年平, 王子悦, 武康宁, 李欢, 李建英 2017 绝缘材料 50 36Google Scholar

    Xiao Y Y, Zhou Q K, Yan N P, Wang Z Y, Wu K N, Li H, Li J Y 2017 Insul. Mater. 50 36Google Scholar

    [29]

    Siddabattuni S, Schuman T P, Dogan F 2011 Mater. Sci. Eng. B 176 1422Google Scholar

    [30]

    张镱议, 李杭东, 郑明胜, 查俊伟, 陈松, 祝晚华, 青双桂 2022 高电压技术 48 4264Google Scholar

    Zhang Y Y, Li H D, Zheng M S, Zha J W, Chen S, Zhu W H, Qing S G 2022 High Volt. Eng. 48 4264Google Scholar

    [31]

    Tu Y P, Zhou F W, Cheng Y, Jiang H, Wang C, Bai F J, Lin J 2018 IEEE Trans. Dielectr. Electr. Insul. 25 1275Google Scholar

    [32]

    Tian F Q, Zhang L, Zhang J L, Peng X 2017 Compos. B. Eng. 114 93Google Scholar

    [33]

    Chen Y, Cheng Y H, Wu K, Nelson J K, Dissado L A, Li S G 2009 IEEE Trans. Plasma. Sci. 37 195Google Scholar

    [34]

    Yang K, Chen W J, Zhao Y S, He Y, Chen X, Du B, Yang W, Zhang S, Fu Y F 2021 ACS Appl. Mater. Interfaces 13 25850Google Scholar

    [35]

    查俊伟, 肖梦雨, 万宝全, 郑明胜 2023 绝缘材料 56 1Google Scholar

    Zha J W, Xiao M Y, Wan B Q, Zheng M S 2023 Insul. Mater. 56 1Google Scholar

    [36]

    Zhang X D, Zhang Z T, Wang H Z, Cao B Y 2023 ACS Appl. Mater. Interfaces 15 3534Google Scholar

    [37]

    Tang D M, Ren C L, Wei X L, Wang M S, Liu C, Bando Y, Golberg D 2011 ACS Nano 5 7362Google Scholar

    [38]

    Zeng X, Sun J, Yao Y, Sun R, Xu J B, Wong C P 2017 ACS Nano 11 5167Google Scholar

    [39]

    Chang H B, Lu M X, Arias-Monje P J, Luo J, Park C, Kumar S 2019 ACS Appl. Nano Mater. 2 6670Google Scholar

    [40]

    查俊伟, 王帆 2022 71 233601Google Scholar

    Zha J W, Wang F 2022 Acta Phys. Sin. 71 233601Google Scholar

  • 图 1  Tanaka多核模型示意图

    Fig. 1.  Schematic diagram of Tanaka multicore model.

    图 2  BNNTs@mSiO2-KH560纳米颗粒的制备及表征 (a) BNNTs@mSiO2-KH560纳米颗粒的制备流程; (b)—(d) BNNTs@mSiO2-KH560的TEM图像; (e) BNNTs与BNNTs@mSiO2-KH560在5°—90°的XRD图谱; (f)—(h) BNNTs与BNNTs@mSiO2-KH560的XPS图谱; (i) BNNTs与BNNTs@mSiO2-KH560的FT-IR图谱

    Fig. 2.  Preparation and characterization of BNNTs@mSiO2-KH560 nanoparticles: (a) Preparation process of BNNTs@mSiO2-KH560 nanoparticles; (b)–(d) TEM images of BNNTs@mSiO2-KH560; (e) XRD patterns of BNNTs and BNNTs@mSiO2-KH560 at 5°–90°; (f)–(h) XPS patterns of BNNTs and BNNTs@mSiO2-KH560; (i) FT-IR patterns of BNNTs and BNNTs@mSiO2-KH560.

    图 3  (a)—(d) 不同BNNTs含量的复合电介质SEM图像; (e)—(h)不同BNNTs@mSiO2-KH560含量的复合电介质SEM图像

    Fig. 3.  (a)–(d) SEM images of composite dielectric with different BNNTs contents; (e)–(h) SEM images of composite dielectric with different BNNTs@mSiO2-KH560 contents.

    图 4  复合电介质的介电性能 (a) 不同BNNTs含量的复合电介质介电常数、介质损耗因数频谱图; (b) 不同BNNTs@mSiO2-KH560含量的复合电介质介电常数、介质损耗因数频谱图

    Fig. 4.  Dielectric properties of composite dielectric: (a) Dielectric constant, dielectric loss spectrum of composite dielectric with different BNNTs contents; (b) dielectric constant, dielectric loss spectrum of composite dielectric with different BNNTs@mSiO2-KH560 contents.

    图 5  (a)—(c) 不同填料复合电介质的Cole-Cole图; (d)—(f) 不同填料复合电介质介电常数两项式Cole-Cole方程拟合图

    Fig. 5.  (a)–(c) Cole-Cole diagram of composite dielectric with different fillers; (d)–(f) two-term Cole-Cole equation fit diagram of dielectric constant of composite dielectric with different fillers.

    图 6  不同填料复合电介质的介质损耗因数温谱图

    Fig. 6.  Temperature spectrum of dielectric loss factor of composite dielectric with different fillers.

    图 7  复合电介质电击穿性能和去极化热刺激电流曲线 (a) 不同填料含量的复合电介质电击穿测试威布尔概率分布图; (b) 复合电介质电击穿通道示意图; (c) 复合电介质良好界面结合阻碍放电发展示意图; (d) 不同填料复合电介质全温谱去极化热刺激电流曲线; (e) 不同填料复合电介质β峰去极化热刺激电流曲线

    Fig. 7.  Electrical breakdown performance and depolarization heat stimulation current curves of composite dielectrics: (a) Weibull probability distribution diagram for electrical breakdown test of composite dielectric with different filler contents; (b) schematic diagram of composite dielectric electrical breakdown channel; (c) schematic diagram of composite dielectric possessing excellent interface combination hinders the intention of discharge emitting; (d) depolarization heat stimulation current curves with full temperature spectrum of composite dielectrics with different fillers; (e) β peak depolarization heat stimulation current curves of composite dielectrics with different fillers.

    图 8  不同填料复合电介质的韧性与导热性能 (a) 不同填料复合电介质的应力-应变曲线; (b) 不同填料复合电介质的杨氏模量; (c), (d) 不同填料复合电介质的导热系数及其增长率

    Fig. 8.  Toughness and thermal conductivity of composite dielectric with different fillers: (a) Stress-strain curve of composite dielectric with different fillers; (b) Young’s modulus of composite dielectric with different fillers; (c), (d) thermal conductivity and its corresponding growth rate of composite dielectric with different fillers.

    表 1  两项式Cole-Cole方程拟合参数表

    Table 1.  Table of parameters for fitting the two-term Cole-Cole equation.

    复合电介质温度/℃$ {\omega _1} $/Hz$ {\gamma _1} $$ {\omega _2} $/Hz$ {\gamma _2} $$ {\varepsilon _\infty } $$ {\varepsilon _{\text{s}}} $
    Epoxy1500.320.7980000.603.5022.0
    1400.30.916000.603.7510.0
    1300.340.99500.453.67.0
    BNNTs1500.50.980000.604.6022.0
    1400.50.9550000.604.6016.5
    1300.380.9715000.504.4510.0
    BNNTs@mSiO2-KH5601500.250.980000.604.9028.0
    1400.130.8510000.454.5024.0
    1300.050.652600.454.3015.0
    下载: 导出CSV

    表 2  复合电介质的标准击穿场强和形状参数

    Table 2.  Standard breakdown field strength and shape parameters of composite dielectric.

    复合电介质 标准击穿场强/
    (kV·mm–1)
    形状参数
    Epoxy 26.02 4.31
    BNNTs-0.5 20.92 4.30
    BNNTs-3 36.04 22.89
    BNNTs@mSiO2-KH560-0.5 29.69 6.25
    BNNTs@mSiO2-KH560-1 42.90 7.35
    BNNTs@mSiO2-KH560-2 69.50 6.73
    BNNTs@mSiO2-KH560-3 95.42 6.67
    下载: 导出CSV

    表 3  复合电介质的陷阱深度及密度

    Table 3.  Trap depth and density of composite dielectric.

    复合电介质$ \alpha $ 陷阱$ \beta $ 陷阱$ Q $/pC
    $ E $/eV$ {Q_\alpha } $/pC$ E $/eV$ {Q_\beta } $/pC
    Epoxy0.14134134
    BNNTs0.079494
    BNNTs@mSiO2-KH5600.206520.820.32652.32
    下载: 导出CSV

    表 4  复合电介质的韧性

    Table 4.  Toughness of composite dielectric.

    复合电介质韧性/(MJ·m–3)
    Epoxy1.01
    BNNTs-0.51.02
    BNNTs-11.04
    BNNTs-21.37
    BNNTs-31.83
    BNNTs@mSiO2-KH560-0.51.78
    BNNTs@mSiO2-KH560-12.21
    BNNTs@mSiO2-KH560-22.61
    BNNTs@mSiO2-KH560-33.01
    下载: 导出CSV
    Baidu
  • [1]

    张志斌, 任明, 宋波, 陈荣发, 余家赫, 范文杰, 董明 2022 中国电机工程学报 42 1690Google Scholar

    Zhang Z B, Ren M, Song B, Chen R F, Yu J H, Fan W J, Dong M 2022 Proc. CSEE 42 1690Google Scholar

    [2]

    周远翔, 刘轩昊, 朱小倩, 卢毅, 高岩峰 2023 高电压技术 49 2891Google Scholar

    Zhou Y X, Liu X H, Zhu X Q, Lu Y, Gao Y F 2023 High Volt. Eng. 49 2891Google Scholar

    [3]

    Yuan S J, Peng Z Q, Rong M Z, Zhang M Q 2022 Mater. Chem. Front. 6 1137Google Scholar

    [4]

    Chen J, Zhou Y, Huang X Y, Yu C Y, Han D L, Wang A, Zhu Y K, Shi K M, Kang Q, Li P L, Jiang P K, Qian X S, Bao H, Li S T, Wu G N, Zhu X Y, Wang Q 2023 Nature 615 62Google Scholar

    [5]

    Bertasius P, Shneider M, Macutkevic J, Samulionis V, Banys J, Zak A 2019 J. Nanomater Pt. 4 5761439Google Scholar

    [6]

    Golberg D, Bando Y, Tang C, Zhi C 2007 Adv. Mater. 19 2413Google Scholar

    [7]

    Pan Z, Tao Y, Zhao Y, Fitzgerald M L, McBride J R, Zhu L, Li D 2021 Nano Lett. 21 7317Google Scholar

    [8]

    Zhang S, Chen W J, Zhao Y, Yang K, Du B, Ding L J, Yang W, Wu S Z 2021 Compos. B. Eng. 223 109106Google Scholar

    [9]

    Huang X Y, Zhi C Y, Jiang P K, Golberg D, Bando Y, Tanaka T 2013 Adv. Funct. Mater. 23 1824Google Scholar

    [10]

    Lewis T J 2004 IEEE Trans. Dielectr. Electr. Insul. 11 739Google Scholar

    [11]

    Tanaka T 2005 IEEE Trans. Dielectr. Electr. Insul. 12 914Google Scholar

    [12]

    Tanaka T, Kozako M, Fuse N, Ohki Y 2005 IEEE Trans. Dielectr. Electr. Insul. 12 669Google Scholar

    [13]

    韩延东, 韩明勇, 杨文胜 2021 高等学校化学学报 42 965Google Scholar

    Han Y D, Han M Y, Yang W S 2021 Chem. Res. Chin. Univ. 42 965Google Scholar

    [14]

    杨国清, 戚相成, 高青青, 王德意 2022 高电压技术 48 689Google Scholar

    Yang G Q, Qi X C, Gao Q Q, Wang D Y 2022 High Volt. Eng. 48 689Google Scholar

    [15]

    Amin M S, Molin T E, Tampubolon C, Kranbuehl D E, Schniepp H C 2020 Chem. Mater. 32 9090Google Scholar

    [16]

    Li B, Zeng H C 2018 ACS Appl. Mater. Interfaces 10 29435Google Scholar

    [17]

    李鹏新, 崔浩喆, 邢照亮, 郭宁, 闵道敏 2022 电工技术学报 37 291Google Scholar

    Li P X, Cui H Z, Xing Z L, Guo N, Min D M 2022 Trans. CES. 37 291Google Scholar

    [18]

    查俊伟, 黄文杰, 杨兴, 万宝全, 郑明胜 2023 高电压技术 49 1055Google Scholar

    Zha J W, Huang W J, Yang X, Wan B Q, Zheng M S 2023 High Volt. Eng. 49 1055Google Scholar

    [19]

    Zhao L H, Yan L, Wei C M, Li Q H, Huang X L, Wang Z L, Fu M L, Ren J W 2020 J. Phys. Chem. C 124 12723Google Scholar

    [20]

    Feng Z Q, Liu X H, Zhang W C, Zeng J J, Liu J M, Chen B F, Lin J M, Tan L Q, Liang L Y 2022 J. Mater. Sci. 57 1156Google Scholar

    [21]

    高铭泽, 张沛红 2016 65 247802Google Scholar

    Gao M Z, Zhang P H 2016 Acta Phys. Sin. 65 247802Google Scholar

    [22]

    邹阳, 林锦煌, 何津, 翁祖辰, 金涛 2023 电工技术学报 38 622Google Scholar

    Zhou Y, Lin J H, He J, Wen Z C, Jin T 2023 Trans. CES. 38 622Google Scholar

    [23]

    张涛, 江世杰, 张宁, 任乔林, 肖洒 2022 高电压技术 48 1452Google Scholar

    Zhang T, Jiang S J, Zhang N, Ren Q L, Xiao S 2022 High Volt. Eng. 48 1452Google Scholar

    [24]

    Heileman K, Daoud J, Tabrizian M 2013 Biosens. Bioelectron. 49C 348Google Scholar

    [25]

    Achour M E, Brosseau C, Carmona F 2008 J. Appl. Phys. 103 1277Google Scholar

    [26]

    成鹏飞, 王辉, 李盛涛 2013 62 057701Google Scholar

    Cheng P F, Wang H, Li S T 2013 Acta Phys. Sin. 62 057701Google Scholar

    [27]

    Ibragimov T D, Ramazanova I S, Yusifova U V, Rzayev R M 2023 Integr. Ferroelectr. 231 1Google Scholar

    [28]

    肖异瑶, 周求宽, 宴年平, 王子悦, 武康宁, 李欢, 李建英 2017 绝缘材料 50 36Google Scholar

    Xiao Y Y, Zhou Q K, Yan N P, Wang Z Y, Wu K N, Li H, Li J Y 2017 Insul. Mater. 50 36Google Scholar

    [29]

    Siddabattuni S, Schuman T P, Dogan F 2011 Mater. Sci. Eng. B 176 1422Google Scholar

    [30]

    张镱议, 李杭东, 郑明胜, 查俊伟, 陈松, 祝晚华, 青双桂 2022 高电压技术 48 4264Google Scholar

    Zhang Y Y, Li H D, Zheng M S, Zha J W, Chen S, Zhu W H, Qing S G 2022 High Volt. Eng. 48 4264Google Scholar

    [31]

    Tu Y P, Zhou F W, Cheng Y, Jiang H, Wang C, Bai F J, Lin J 2018 IEEE Trans. Dielectr. Electr. Insul. 25 1275Google Scholar

    [32]

    Tian F Q, Zhang L, Zhang J L, Peng X 2017 Compos. B. Eng. 114 93Google Scholar

    [33]

    Chen Y, Cheng Y H, Wu K, Nelson J K, Dissado L A, Li S G 2009 IEEE Trans. Plasma. Sci. 37 195Google Scholar

    [34]

    Yang K, Chen W J, Zhao Y S, He Y, Chen X, Du B, Yang W, Zhang S, Fu Y F 2021 ACS Appl. Mater. Interfaces 13 25850Google Scholar

    [35]

    查俊伟, 肖梦雨, 万宝全, 郑明胜 2023 绝缘材料 56 1Google Scholar

    Zha J W, Xiao M Y, Wan B Q, Zheng M S 2023 Insul. Mater. 56 1Google Scholar

    [36]

    Zhang X D, Zhang Z T, Wang H Z, Cao B Y 2023 ACS Appl. Mater. Interfaces 15 3534Google Scholar

    [37]

    Tang D M, Ren C L, Wei X L, Wang M S, Liu C, Bando Y, Golberg D 2011 ACS Nano 5 7362Google Scholar

    [38]

    Zeng X, Sun J, Yao Y, Sun R, Xu J B, Wong C P 2017 ACS Nano 11 5167Google Scholar

    [39]

    Chang H B, Lu M X, Arias-Monje P J, Luo J, Park C, Kumar S 2019 ACS Appl. Nano Mater. 2 6670Google Scholar

    [40]

    查俊伟, 王帆 2022 71 233601Google Scholar

    Zha J W, Wang F 2022 Acta Phys. Sin. 71 233601Google Scholar

  • [1] 阴凯, 郭其阳, 张添胤, 李静, 陈向荣. 表面氟化聚苯乙烯纳米微球提升环氧树脂绝缘特性.  , 2024, 73(12): 127703. doi: 10.7498/aps.73.20240215
    [2] 刘秀成, 杨智, 郭浩, 陈颖, 罗向龙, 陈健勇. 金刚石/环氧树脂复合物热导率的分子动力学模拟.  , 2023, 72(16): 168102. doi: 10.7498/aps.72.20222270
    [3] 孟菁饴, 卢红伟, 马世乐, 张嘉奇, 何富民, 苏伟涛, 赵晓东, 田婷, 王翼, 邢誉. 功能化原子力显微镜在纳米电介质材料性能研究中的应用进展.  , 2022, 71(24): 240701. doi: 10.7498/aps.71.20221462
    [4] 朱茂聪, 邵雅洁, 周静, 陈文, 王志青, 田晶. 铌掺杂锆钛酸铅铁电薄膜调控CuInS2量子点的阻变性能.  , 2022, 71(20): 207301. doi: 10.7498/aps.71.20220911
    [5] 杨如霞, 卢玉明, 曾丽竹, 张禄佳, 李冠男. 钆掺杂对0.7BiFe0.95Ga0.05O3-0.3BaTiO3陶瓷的结构、介电性能和多铁性能的影响.  , 2020, 69(10): 107701. doi: 10.7498/aps.69.20200175
    [6] 曾强, 张晨利. 轴压和扭转复合载荷作用下氮化硼纳米管屈曲行为的分子动力学模拟.  , 2018, 67(24): 246101. doi: 10.7498/aps.67.20180641
    [7] 林生军, 黄印, 谢东日, 闵道敏, 王威望, 杨柳青, 李盛涛. 环氧树脂高温分子链松弛与玻璃化转变特性.  , 2016, 65(7): 077701. doi: 10.7498/aps.65.077701
    [8] 茹佳胜, 闵道敏, 张翀, 李盛涛, 邢照亮, 李国倡. 直流电晕充电下环氧树脂表面电位衰减特性的研究.  , 2016, 65(4): 047701. doi: 10.7498/aps.65.047701
    [9] 冯奇, 李梦凯, 唐海通, 王晓东, 高忠民, 孟繁玲. 石墨烯/聚乙烯醇/聚偏氟乙烯基纳米复合薄膜的介电性能.  , 2016, 65(18): 188101. doi: 10.7498/aps.65.188101
    [10] 赵学童, 廖瑞金, 李建英, 王飞鹏. 直流老化对CaCu3Ti4O12陶瓷介电性能的影响.  , 2015, 64(12): 127701. doi: 10.7498/aps.64.127701
    [11] 张召富, 耿朝晖, 王鹏, 胡耀乔, 郑宇斐, 周铁戈. 5d过渡金属原子掺杂氮化硼纳米管的第一性原理计算.  , 2013, 62(24): 246301. doi: 10.7498/aps.62.246301
    [12] 李智敏, 施建章, 卫晓黑, 李培咸, 黄云霞, 李桂芳, 郝跃. 掺铝3C-SiC电子结构的第一性原理计算及其微波介电性能.  , 2012, 61(23): 237103. doi: 10.7498/aps.61.237103
    [13] 周静, 刘存金, 李儒, 陈文. 异质界面对Ca(Mg1/3Nb2/3)O3/CaTiO3叠层薄膜结构和介电性能的影响.  , 2012, 61(6): 067401. doi: 10.7498/aps.61.067401
    [14] 陈超, 江向平, 卫巍, 李小红, 魏红斌, 宋福生. (K0.45Na0.55)NbO3无铅压电晶体的生长形态与介电性能研究.  , 2011, 60(10): 107704. doi: 10.7498/aps.60.107704
    [15] 丁南, 唐新桂, 匡淑娟, 伍君博, 刘秋香, 何琴玉. 锰掺杂对Ba(Zr, Ti)O3陶瓷压电与介电性能的影响.  , 2010, 59(9): 6613-6619. doi: 10.7498/aps.59.6613
    [16] 曾 涛, 董显林, 毛朝梁, 梁瑞虹, 杨 洪. 孔隙率及晶粒尺寸对多孔PZT陶瓷介电和压电性能的影响及机理研究.  , 2006, 55(6): 3073-3079. doi: 10.7498/aps.55.3073
    [17] 何开华, 郑 广, 吕 涛, 陈 刚, 姬广富. 高压对氮化硼纳米管的几何结构、电子结构和光学性质的影响.  , 2006, 55(6): 2908-2913. doi: 10.7498/aps.55.2908
    [18] 张丽娜, 赵苏串, 郑嘹赢, 李国荣, 殷庆瑞. 复合层状Bi7Ti4NbO21铁电陶瓷的结构与介电和压电性能研究.  , 2005, 54(5): 2346-2351. doi: 10.7498/aps.54.2346
    [19] 马建华, 孙璟兰, 孟祥建, 林 铁, 石富文, 褚君浩. SrTiO3金属-绝缘体-半导体结构的介电与界面特性.  , 2005, 54(3): 1390-1395. doi: 10.7498/aps.54.1390
    [20] 赵晓鹏, 范吉军, 高秀敏, 曹昌年. 电流变液的微波透射调控行为.  , 2001, 50(7): 1302-1307. doi: 10.7498/aps.50.1302
计量
  • 文章访问数:  2322
  • PDF下载量:  86
  • 被引次数: 0
出版历程
  • 收稿日期:  2023-05-02
  • 修回日期:  2023-07-18
  • 上网日期:  2024-01-11
  • 刊出日期:  2024-01-20

/

返回文章
返回
Baidu
map