-
准分子激光器由于其短波长、高重频、大能量在国民经济生产中具有重要作用. 在准分子激光器应用场景及输出特性中, 光束质量及能量稳定性是高端准分子光源的指标, 而预电离过程发展得充分与否是准分子激光系统能否输出高光束质量、能量稳定的激光脉冲的关键. 本文主要针对ArF准分子激光器的预电离过程, 建立了一维及二维仿真计算模型, 基于Comsol Multiphysics软件的流体计算方法进行数值仿真分析计算, 重点研究了预电离过程中电离波的传播过程以及预电离与主放电之间的关系. 研究表明, 进行准分子激光器进行系统设计时, 要综合考虑电晕棒及主电极的空间结构. 合适的预电离结构及预电离电压能够使主放电在自由电子维持期间被触发, 可以有效降低放电电压, 避免流注及弧光放电, 提升输出光束质量及系统能量稳定性.Excimer laser plays an important role in the national economic production because of its short wavelength, high repetition frequency and large energy. In the output characteristics of excimer lasers, high beam quality and high energy stability are the characters of high-end excimer light source, and whether the excimer laser system can sufficiently develop the preionization process is the key to output laser pulses with high beam quality and stable energy. This paper is mainly to study the preionization process of ArF excimer laser, and establish one-dimensional simulation calculation model and two-dimensional simulation calculation model. Based on the fluid calculation method of Comsol Multiphysics software, the numerical simulation analysis and calculation are carried out, with the study focusing on the ionization wave propagation process in the preionization process and the relationship between preionization and main discharge. The results show that the spatial structure of corona rod and main electrode should be considered comprehensively when an excimer laser system is designed. Appropriate preionization structure and voltage can make the main discharge triggered during the maintenance of free electrons, which can effectively reduce the discharge voltage, avoid streamer and arc discharge, and improve the output beam quality and system energy stability.
-
Keywords:
- excimer laser /
- fluid model /
- preionization /
- electron number density
[1] Shuntaro W, Alcock A J, Leopold K E, Taylor R S 1981 Appl. Phys. Lett. 38 3
Google Scholar
[2] Feenstra L, Bastiaens H M J, Peters P J M, Witteman W J 1999 IEEE J. Sel. Top. Quant. 5 1515
Google Scholar
[3] Lin S C, Levatter J I 1979 Appl. Phys. Lett. 34 505
Google Scholar
[4] Levatter J I, Lin S C 1980 J. Appl. Phys. 51 210
Google Scholar
[5] Taylor R S 1986 Appl. Phys. B 41 1
Google Scholar
[6] Kushner M J 1991 IEEE Trans. Plas. Sci. 19 387
Google Scholar
[7] Treshchalov A, Lissovski A, Chikeev E 2002 Proc. SPIE. International Conference on Atomic and Molecular Pulsed Lasers IV 4747 253
Google Scholar
[8] Mathew D, Bastiaens H M J, Boller K J 2006 Appl. Phys. Lett. 88 101502
Google Scholar
[9] Xiong Z M, Kushner M J 2010 J. Phys. D: Apply. Phys. 43 505204
Google Scholar
[10] Yampolskaya S A, Yastremskii A G, Panchenko Y N 2020 IEEE J. Quan. Elec. 56 1500209
Google Scholar
[11] Akashi H, Sakai Y, Tagashira H 1995 J. Phys. D: Appl. Phys. 28 445
Google Scholar
[12] Hagelaar G J M, Pitchford L C 2005 Plas. Sour. Sci. 14 722
Google Scholar
[13] Razhev A M, Shchedrin A I, Kalyuzhnaya A G, Zhupikov A A 2005 Quantum Electron. 35 799
Google Scholar
-
图 2 电晕棒与阴极间电子数密度分布情况 (a) 25, 28以及30 ns时的电子数密度分布情况; (b)预电离过程中电子数密度分布情况
Fig. 2. Electrons number density distribution between corona tube and cathode: (a) Electron number density at 25, 28 and 30 ns; (b) electron number density during preionization process.
图 3 高密度电子维持时间随预电离电压变化
Fig. 3. Maintenance time of high-density electrons varies with the preionization voltage.
图 4 不同预电离电压下功率沉积情况 (a) V = 5.2 kV; (b) V = 13 kV; (c) V = 26 kV
Fig. 4. Energy deposition with different preionization voltage: (a) V = 5.2 kV; (b) V = 13 kV; (c) V = 26 kV.
图 5 二维几何模型. 1代表阴极, 2代表阳极, 3代表电晕棒, 4和5代表陶瓷板, 6和7代表工作气体区域
Fig. 5. Two-dimensional geometric model. 1 represents the cathode, 2 represents the anode, 3 represents the corona rod, 4 and 5 represent the ceramic plate, 6 and 7 represent the working gas area.
图 6 预电离过程中电子数密度分布情况 (a) t = 25 ns时, max = 1.76×1015, min = 1.37×105; (b) t = 29 ns时, max = 4.40×1018, min = 9.28×104; (c) t = 30 ns时, max = 2.44×1019, min = 8.28×104; (d) t = 35 ns时, max = 4.40×1018, min = 9.28×104; (e) t = 45 ns时, max = 1.50×1024, min = 1.74×10–7; (f) t = 47 ns时, max = 1.62×1024, min = 1.88×10–7
Fig. 6. Distribution of electron number density during preionization: (a) t = 25 ns, max = 1.76×1015, min = 1.37×105; (b) t = 29 ns, max = 4.40×1018, min = 9.28×104; (c) t = 30 ns, max = 2.44×1019, min = 8.28×104; (d) t = 35 ns, max = 4.40×1018, min = 9.28×104; (e) t = 45 ns, max = 1.50×1024, min = 1.74×10–7; (f) t = 47 ns, max = 1.62×1024, min = 1.88×10–7.
图 7 不同预电离电压下自由电子数密度分布情况 (a) V = 5.2 kV时, t = 44 ns, max = 9.67×1018, min = 1.54×106; t = 47 ns, max = 7.31×1022, min = 0.009; (b) V = 13 kV时, t = 30 ns, max = 2.44×1019, min = 8.28×104; t = 44 ns, max = 1.26×1024, min =1.88×10–7; (c) V = 26 kV时, t = 23 ns, max = 3.63×1021, min = 1.45×104; t = 44 ns, max = 1.23×1025, min = 0.012
Fig. 7. Electron number density distribution with different preionization voltage: (a) V = 5.2 kV, t = 44 ns, max = 9.67×1018, min = 1.54×106; t = 47 ns, max = 7.31×1022, min = 0.009; (b) V = 13 kV, t = 30 ns, max = 2.44×1019, min = 8.28×104; t = 44 ns, max = 1.26×1024, min = 1.88×10–7; (c) V = 26 kV, t = 23 ns, max = 3.63×1021, min = 1.45×104; t = 44 ns, max = 1.23×1025, min = 0.012.
表 1 计算过程中考虑的化学反应通道, Boltz代表该反应的反应速率由玻尔兹曼方程计算得到[11,13]
Table 1. Reactions considered in the study, label Boltz indicates that the constant was calculated from the Boltzman equation[11,13].
Ionization reaction Constant rate Ar + e → Ar* + e Boltz Ar + e → Ar+ + 2e Boltz F2 + e → F– + F Boltz Ne + e → Ne+ + 2e Boltz Ne + e → Ne* + e Boltz Ne* + 2Ne → $ {\text{Ne}}_2^* $ + Ne 4 × 10–34 cm6/s[13] Ne* + e → Ne+ + 2e Boltz ArF* → Ar + F 1/4.2 ns[11] $ {\text{Ne}}_2^* $ → 2Ne + hγ'' 1/11 ns[13] Xe + hγ'' → Xe + e 10–16 cm2 [11] Ar+ → Ar — F– → F — Ar* → Ar — Ne+ → Ne — Ne* → Ne — $ {\text{Ne}}_2^* $ → 2Ne — 
下载: 导出CSV
-
[1] Shuntaro W, Alcock A J, Leopold K E, Taylor R S 1981 Appl. Phys. Lett. 38 3
Google Scholar
[2] Feenstra L, Bastiaens H M J, Peters P J M, Witteman W J 1999 IEEE J. Sel. Top. Quant. 5 1515
Google Scholar
[3] Lin S C, Levatter J I 1979 Appl. Phys. Lett. 34 505
Google Scholar
[4] Levatter J I, Lin S C 1980 J. Appl. Phys. 51 210
Google Scholar
[5] Taylor R S 1986 Appl. Phys. B 41 1
Google Scholar
[6] Kushner M J 1991 IEEE Trans. Plas. Sci. 19 387
Google Scholar
[7] Treshchalov A, Lissovski A, Chikeev E 2002 Proc. SPIE. International Conference on Atomic and Molecular Pulsed Lasers IV 4747 253
Google Scholar
[8] Mathew D, Bastiaens H M J, Boller K J 2006 Appl. Phys. Lett. 88 101502
Google Scholar
[9] Xiong Z M, Kushner M J 2010 J. Phys. D: Apply. Phys. 43 505204
Google Scholar
[10] Yampolskaya S A, Yastremskii A G, Panchenko Y N 2020 IEEE J. Quan. Elec. 56 1500209
Google Scholar
[11] Akashi H, Sakai Y, Tagashira H 1995 J. Phys. D: Appl. Phys. 28 445
Google Scholar
[12] Hagelaar G J M, Pitchford L C 2005 Plas. Sour. Sci. 14 722
Google Scholar
[13] Razhev A M, Shchedrin A I, Kalyuzhnaya A G, Zhupikov A A 2005 Quantum Electron. 35 799
Google Scholar
下载:
计量
- 文章访问数: 2594
- PDF下载量: 88
- 被引次数: 0
