冲击诱导金属铝表面微射流现象的微观模拟

邵建立; 王裴; 何安民; 秦承森

doi:10.7498/aps.61.184701

摘要

采用嵌入原子势分子动力学模拟方法, 研究了金属铝表面沟槽在冲击下形成微射流的微观过程和动力学性质. 通过对模拟结果的统计分析, 获得了较宽冲击压力范围内微射流形态的变化规律, 以及相应的质量-空间分布和质量-速度分布变化. 基于原子中心对称参数, 分析了样品近表面非晶态转变和卸载熔化过程, 获得了卸载熔化对微射流质量及其分布的影响规律. 研究还发现: 样品熔化之前, 微射流质量与波后粒子速度呈线性增加关系; 卸载熔化出现后, 微射流质量开始迅速增加; 当卸载熔化速度足够快时, 金属强度效应可忽略, 此时微射流质量与波后粒子速度再次表现出线性增加关系.

关键词:

微射流 /
分子动力学 /
冲击

Abstract

Via molecular dynamics simulations employing an embedded-atom-method potential, we investigate the microscopic process and dynamical properties of shock-induced micro-jet from a grooved aluminum surface. For a large range of shock pressure, we obtain the micro-jet morphology variation, its mass spatial distribution and mass-velocity distribution. The amorphous state and release melting during the jetting are both analyzed using the central symmetry parameter, where the effect law of release melting on the micro-jet is obtained. It is found that the micro-jet mass keeps a linear increase with the piston velocity prior to release melting; the micro-jet mass is enhanced evidently after release melting; while the velocity of release melting is above a threshold, the jetting mass shows a linear increase with the piston velocity again, where the strength of material can be neglected.

Keywords:

micro-jet /
molecular dynamics /
shock

作者及机构信息

1.
北京应用物理与计算数学研究所计算物理实验室, 北京 100094

基金项目: 中国工程物理研究院科学技术发展基金(批准号: 2009A0101007)资助的课题.

Authors and contacts

1.
Institute of Applied Physics and Computational Mathematics, Beijing 100094, China

Funds: Project supported by the Foundation for Development of Science and Technology of China Academy of Engineering Physics, China (Grant No. 2009A0101007).

参考文献

[1]	Walsh J M, Shreffler R G, Willig F G 1953 J. Appl. Phys. 24 349
[2]	Zhu J S, Hu X M, Wang P, Chen J, Xu A G 2010 Adv. Mech. 40 400 (in Chinese) [朱建士, 胡晓棉, 王裴, 陈军, 许爱国 2010 力学进展 40 400]
[3]	Asay J R 1976 Material Ejection from Shock-Loaded free Surface of Aluminum and Lead, Sandia Laboratories, SAND76-0542
[4]	Asay J R, Berthold L D 1978 A Model for Estimating the Effects of Surface Roughness on Mass Ejection from Shocked Materials Sandia Laboratories, SAND78-1256
[5]	Asay J R, Mix L P, Perry F C 1976 Appl. Phys. Lett. 29 284
[6]	Zellner M B, Grover M, Hammerberg J E 2007 J. Appl. Phys. 102 013522
[7]	Zellner M B, Dimonte G, Germann T C 2009 AIP Conference Proceedings 1195 1047
[8]	Zellner M B, McNeil W V, Hammerberg J E 2008 J. Appl. Phys. 103 123502
[9]	Han C S 1989 Chin. J. High Press. Phys. 3 324 (in Chinese) [韩长生 1989 高压 3 324]
[10]	Wang P, Shao J L, Qin C S 2009 Acta Phys. Sin. 58 1064 (in Chinese) [王裴, 邵建立, 秦承森 2009 58 1064]
[11]	Chen J, Jing F Q, Zhang J L, Chen D Q 2002 Acta Phys. Sin. 51 2386 (in Chinese) [陈军, 经福谦, 张景琳, 陈栋泉 2002 51 2386]
[12]	Germann T C, Hammerberg J E, Holian B L 2004 AIP Conference Proceedings 706 285
[13]	Chen Q F, Cao X L, Zhang Y, Cai L C, Chen D Q 2005 Chin. Phys. Lett. 22 3151
[14]	Daw M S, Baskes M I 1984 Phys. Rev. B 29 6443
[15]	Finnis M W, Sinclair J E 1984 Philos. Mag. A 50 45
[16]	Mei J, Davenport J W 1992 Phys. Rev. B 46 21
[17]	Holian B L, Lomdahl P S 1998 Science 280 2085
[18]	Swope W C, Andersen H C, Berens P H, Wilson K R 1982 J. Chem. Phys. 76 637
[19]	Irving J H, Kirkwood J G 1950 J. Chem. Phys. 18 817
[20]	Allen M P, Tildesley D J 1987 Computer Simulations of Liquids (Oxford: Oxford University Press) p46
[21]	Kelchner C L, Plimpton S J, Hamilton J C 1998 Phys. Rev. B 58 11085
[22]	Mitchell A C, Nellis W J 1981 J. Appl. Phys. 52 3363
[23]	Frachet V, Elias P, Martineau J 1988 Shock Waves in Condensed Matter (Amsterdam North-Holland) p235
[24]	Ogorodnikov V A, Ivanov A G, Mikhailov A L 1998 Ogorodnikov_Combustion, Explosion, and Shock Waves 34 696

施引文献

[1]	Walsh J M, Shreffler R G, Willig F G 1953 J. Appl. Phys. 24 349
[2]	Zhu J S, Hu X M, Wang P, Chen J, Xu A G 2010 Adv. Mech. 40 400 (in Chinese) [朱建士, 胡晓棉, 王裴, 陈军, 许爱国 2010 力学进展 40 400]
[3]	Asay J R 1976 Material Ejection from Shock-Loaded free Surface of Aluminum and Lead, Sandia Laboratories, SAND76-0542
[4]	Asay J R, Berthold L D 1978 A Model for Estimating the Effects of Surface Roughness on Mass Ejection from Shocked Materials Sandia Laboratories, SAND78-1256
[5]	Asay J R, Mix L P, Perry F C 1976 Appl. Phys. Lett. 29 284
[6]	Zellner M B, Grover M, Hammerberg J E 2007 J. Appl. Phys. 102 013522
[7]	Zellner M B, Dimonte G, Germann T C 2009 AIP Conference Proceedings 1195 1047
[8]	Zellner M B, McNeil W V, Hammerberg J E 2008 J. Appl. Phys. 103 123502
[9]	Han C S 1989 Chin. J. High Press. Phys. 3 324 (in Chinese) [韩长生 1989 高压 3 324]
[10]	Wang P, Shao J L, Qin C S 2009 Acta Phys. Sin. 58 1064 (in Chinese) [王裴, 邵建立, 秦承森 2009 58 1064]
[11]	Chen J, Jing F Q, Zhang J L, Chen D Q 2002 Acta Phys. Sin. 51 2386 (in Chinese) [陈军, 经福谦, 张景琳, 陈栋泉 2002 51 2386]
[12]	Germann T C, Hammerberg J E, Holian B L 2004 AIP Conference Proceedings 706 285
[13]	Chen Q F, Cao X L, Zhang Y, Cai L C, Chen D Q 2005 Chin. Phys. Lett. 22 3151
[14]	Daw M S, Baskes M I 1984 Phys. Rev. B 29 6443
[15]	Finnis M W, Sinclair J E 1984 Philos. Mag. A 50 45
[16]	Mei J, Davenport J W 1992 Phys. Rev. B 46 21
[17]	Holian B L, Lomdahl P S 1998 Science 280 2085
[18]	Swope W C, Andersen H C, Berens P H, Wilson K R 1982 J. Chem. Phys. 76 637
[19]	Irving J H, Kirkwood J G 1950 J. Chem. Phys. 18 817
[20]	Allen M P, Tildesley D J 1987 Computer Simulations of Liquids (Oxford: Oxford University Press) p46
[21]	Kelchner C L, Plimpton S J, Hamilton J C 1998 Phys. Rev. B 58 11085
[22]	Mitchell A C, Nellis W J 1981 J. Appl. Phys. 52 3363
[23]	Frachet V, Elias P, Martineau J 1988 Shock Waves in Condensed Matter (Amsterdam North-Holland) p235
[24]	Ogorodnikov V A, Ivanov A G, Mikhailov A L 1998 Ogorodnikov_Combustion, Explosion, and Shock Waves 34 696

[1]	闻鹏, 陶钢. 温度对CoCrFeMnNi高熵合金冲击响应和塑性变形机制影响的分子动力学研究. , 2023, 0(0): 0-0. doi: 10.7498/aps.72.20221621
[2]	闻鹏, 陶钢. 温度对CoCrFeMnNi高熵合金冲击响应和塑性变形机制影响的分子动力学研究. , 2022, 71(24): 246101. doi: 10.7498/aps.71.20221621
[3]	王小峰, 陶钢, 徐宁, 王鹏, 李召, 闻鹏. 冲击波诱导水中纳米气泡塌陷的分子动力学分析. , 2021, 70(13): 134702. doi: 10.7498/aps.70.20210058
[4]	第伍旻杰, 胡晓棉. 单晶Ce冲击相变的分子动力学模拟. , 2020, 69(11): 116202. doi: 10.7498/aps.69.20200323
[5]	朱琪, 王升涛, 赵福祺, 潘昊. 层错四面体对单晶铜层裂行为影响的分子动力学研究. , 2020, 69(3): 036201. doi: 10.7498/aps.69.20191425
[6]	马通, 谢红献. 单晶铁沿[101]晶向冲击过程中面心立方相的形成机制. , 2020, 69(13): 130202. doi: 10.7498/aps.69.20191877
[7]	刘军, 付峥, 冯其京, 王裴. 爆轰驱动金属飞层对碰凸起和微射流形成的数值模拟研究. , 2015, 64(23): 234701. doi: 10.7498/aps.64.234701
[8]	马文, 陆彦文. 纳米多晶铜中冲击波阵面的分子动力学研究. , 2013, 62(3): 036201. doi: 10.7498/aps.62.036201
[9]	邵建立, 王裴, 何安民, 秦承森, 辛建婷, 谷渝秋. 三角波加载下金属铝动态破坏现象的微观模拟. , 2013, 62(7): 076201. doi: 10.7498/aps.62.076201
[10]	王军国, 刘福生, 李永宏, 张明建, 张宁超, 薛学东. 在石英界面处液态水的冲击结构相变. , 2012, 61(19): 196201. doi: 10.7498/aps.61.196201
[11]	王裴, 孙海权, 邵建立, 秦承森, 李欣竹. 微喷颗粒与气体混合过程的数值模拟研究. , 2012, 61(23): 234703. doi: 10.7498/aps.61.234703
[12]	王裴, 邵建立, 秦承森. 沟槽角度对金属表面微射流性质的影响. , 2012, 61(23): 234701. doi: 10.7498/aps.61.234701
[13]	马文, 祝文军, 陈开果, 经福谦. 晶界对纳米多晶铝中冲击波阵面结构影响的分子动力学研究. , 2011, 60(1): 016107. doi: 10.7498/aps.60.016107
[14]	郭加宏, 戴世强, 代钦. 液滴冲击液膜过程实验研究. , 2010, 59(4): 2601-2609. doi: 10.7498/aps.59.2601
[15]	陈开果, 祝文军, 马文, 邓小良, 贺红亮, 经福谦. 冲击波在纳米金属铜中传播的分子动力学模拟. , 2010, 59(2): 1225-1232. doi: 10.7498/aps.59.1225
[16]	王裴, 邵建立, 秦承森. 加载波前沿宽度对铝表面微射流的影响. , 2009, 58(2): 1064-1070. doi: 10.7498/aps.58.1064
[17]	张航, 郭蕴博, 陈骁, 王端, 程鹏俊. 颗粒物质在冲击作用下的堆积分布. , 2007, 56(4): 2030-2036. doi: 10.7498/aps.56.2030
[18]	邵建立, 王裴, 秦承森, 周洪强. 铁冲击相变的分子动力学研究. , 2007, 56(9): 5389-5393. doi: 10.7498/aps.56.5389
[19]	邓小良, 祝文军, 贺红亮, 伍登学, 经福谦. 〈111〉晶向冲击加载下单晶铜中纳米孔洞增长的早期动力学行为. , 2006, 55(9): 4767-4773. doi: 10.7498/aps.55.4767
[20]	陈军, 经福谦, 张景琳, 陈栋泉. 冲击作用下金属表面微喷射的分子动力学模拟. , 2002, 51(10): 2386-2392. doi: 10.7498/aps.51.2386

计量

文章访问数: 6470
PDF下载量: 510
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

搜索

留言板