搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

气-液-固三相流混合建模与求解方法

范兴华 谭大鹏 李霖 殷梓超 王彤

引用本文:
Citation:

气-液-固三相流混合建模与求解方法

范兴华, 谭大鹏, 李霖, 殷梓超, 王彤

Modeling and solution method of gas-liquid-solid three-phase flow mixing

Fan Xing-Hua, Tan Da-Peng, Li Lin, Yin Zi-Chao, Wang Tong
PDF
HTML
导出引用
  • 气-液-固三相流混合过程是一个复杂的多重流固耦合动力学问题, 颗粒参数与流道物理空间尺度之间的关系直接影响计算收敛性, 强剪切区域的流固双向耦合作用数值建模与网格处理具有较高难度. 针对上述问题, 提出了一种气-液-固三相流混合的建模与求解方法. 基于流体体积-离散单元耦合模型, 建立考虑颗粒运动的三相动力学模型, 通过求解动量方程, 实现两相流体与颗粒的双向耦合. 自主开发用户自定义函数(UDF)通信接口, 得到流体与颗粒间的相互作用力, 提出了一种多孔相间耦合解法来描述颗粒运动轨迹. 以带强剪切的三相流混合过程为例, 使用该方法研究了不同充气条件对流道物理空间内自由表面、速度分布和颗粒悬浮特性的影响规律. 结果表明, 强剪切和壁面作用可以将流体的切向速度转化为轴向和径向的速度; 选择合适的充气速度可以消除自由液面的不稳定性; 增加流体的流动速度, 对于部分区域颗粒的悬浮提升作用有限. 研究结果可为复杂多相流相间作用机理研究提供有益借鉴, 也可为气-液-固三相颗粒混合生产调控提供技术支持.
    The mixing process of gas-liquid-solid three-phase flow is a complex multi-fluid-structure coupling dynamic problem. The relationship between the particle parameters and the physical spatial scale of the flow channel directly affects the calculation convergence. Numerical modeling and mesh processing of fluid-structure bidirectional interaction in the strong shear zone are difficult. Aiming at the above problems, a method of modeling and solving the gas-liquid-solid three-phase flow mixing is proposed. Based on the volume-of-fluid coupled with discrete-element-method model, a three-phase dynamic model considering particle motion is established. By solving the momentum equation, the bidirectional coupling of two-phase fluid and particle is realized. The user-defined function communication interface is developed independently to obtain the interaction force between fluid and particles, and a porous-interphase coupling solution is proposed to describe the trajectory of particles. Taking the mixing process of three-phase flow with strong shear for example, this method is used to study the influence of different aeration conditions on the free surface, velocity distribution and particle suspension characteristics in the physical space of the flow channel. The results show that strong shear and wall action can convert the tangential velocity of the fluid into axial and radial velocity; choosing an appropriate inflation velocity can eliminate the instability of the free surface and increasing the flow velocity of the fluid has a limited effect on the suspension of particles in some areas. The research results can provide a useful reference for studying the interaction mechanism of complex multiphase flow, and also provide technical support for the mixing production control of gas-liquid-solid three-phase particles.
      通信作者: 谭大鹏, tandapeng@zjut.edu.cn
    • 基金项目: 国家自然科学基金(批准号: 51775501)和浙江省重点科学基金(批准号: LZ21E050003)资助的课题
      Corresponding author: Tan Da-Peng, tandapeng@zjut.edu.cn
    • Funds: Project supported by the National Natural Science Foundation of China (Grant No. 51775501) and the Key Science Foundation of Zhejiang Province, China (Grant No. LZ21E050003)
    [1]

    Delvigne F, Destain J, Thonart P 2005 Chem. Eng. J. 113 1Google Scholar

    [2]

    Ge M, Ji S M, Tan D P, Cao H Q 2021 Int. J. Adv. Manuf. Tech. 114 3419Google Scholar

    [3]

    Hosseini S, Patel D, Ein-Mozaffari F, Mehrvar M 2010 Ind. Eng. Chem. Res. 49 4426Google Scholar

    [4]

    Wang S Y, Jiang X X, Wang R C, Wang X, Yang S W, Zhao J, Liu Y 2017 Adv. Powder Technol. 28 1611Google Scholar

    [5]

    Panneerselvam R, Savithri S, Surender G D 2009 Ind. Eng. Chem. Res. 48 1611Google Scholar

    [6]

    Li L, Tan D P, Yin Z C, Wang T, Fan X H, Wang R H 2021 Renew. Energy 175 887Google Scholar

    [7]

    Li L, Tan D P, Wang T, Yin Z C, Fan X H, Wang R H 2021 Energy 216 119136Google Scholar

    [8]

    Kasat G R, Khopkar A R, Ranade V V, Pandit A B 2008 Chem. Eng. Sci. 63 3877Google Scholar

    [9]

    Qi H, Qin S K, Cheng Z C, Teng Q, Hong T, Xie Y 2021 J. Manuf. Processes 64 585Google Scholar

    [10]

    Tan D P, Li L, Yin Z C, Li D F, Zhu Y L, Zheng S 2020 Int. J. Heat Mass Transfer 150 119250Google Scholar

    [11]

    Alexander S, Alexander D, Markku N, Jan M, Falah A, Maximilian V B, Jochen S, Bernd E 2019 Chem. Eng. Sci. 196 37Google Scholar

    [12]

    Musango L, John S, Lloyd M 2021 Powder Technol. 378 85Google Scholar

    [13]

    Li L, Lu J F, Fang H, Yin Z C, Wang T, Wang R H, Fan X H, Zhao L J, Tan D P, Wan Y H 2020 IEEE Access 8 27649Google Scholar

    [14]

    Han Y, Cundall P A 2013 Int. J. Numer. Anal. Methods Geomech. 37 10Google Scholar

    [15]

    Bastien D, Juliane R, Louis F, Francois B, Bruno B 2021 Chem. Eng. Sci. 230 116137Google Scholar

    [16]

    邵婷, 胡银玉, 王文坦, 金涌, 程易 2013 中国化学工程学报 21 1069Google Scholar

    Shao T, Hu Y Y, Wang W T, Jin Y, Cheng Y 2013 Chin. J. Chem. Eng. 21 1069Google Scholar

    [17]

    Blais B, Lassaigne M, Goniva C, Fradette L 2016 J. Comput. Phys. 318 201Google Scholar

    [18]

    Blais B, Bertrand F 2017 Chem. Eng. Res. Des. 118 270Google Scholar

    [19]

    Blais B, Bertrand O, Fradette L, Bertrand F 2017 Chem. Eng. Res. Des. 123 388Google Scholar

    [20]

    Xu W T, Tan Y B, Li M, Sun J L, Xie D, Liu Z 2020 Particuology 49 159Google Scholar

    [21]

    Sun X, Sakai M 2015 Chem. Eng. Sci. 134 531Google Scholar

    [22]

    Wu L, Gong M, Wang J T 2018 Ind. Eng. Chem. Res. 57 1714Google Scholar

    [23]

    Kang Q Q, He D P, Zhao N, Feng X, Wang J T 2019 Chem. Eng. J. 386 122846Google Scholar

    [24]

    谭大鹏, 杨涛, 赵军, 计时鸣 2016 65 054701Google Scholar

    Tan D P, Yang T, Zhao J, Ji S M 2016 Acta Phys. Sin. 65 054701Google Scholar

    [25]

    刘扬, 韩燕龙, 贾富国, 姚丽娜, 王会, 史宇菲 2015 64 114501Google Scholar

    Liu Y, Han Y L, Jia F G, Yao L N, Wang H, Shi Y F 2015 Acta Phys. Sin. 64 114501Google Scholar

    [26]

    Ergun S 1952 Chem. Eng. Prog. 48 89Google Scholar

    [27]

    Ji S M, Xiao F Q, Tan D P 2010 Sci. China Technol. Sc. 53 100Google Scholar

    [28]

    Saffman P G 1965 J. Fluid Mech. 22 385Google Scholar

    [29]

    Tan D P, Ji S M, Fu Y Z 2016 Int. J. Adv. Manuf. Technol. 85 1261Google Scholar

    [30]

    Li L, Qi H, Yin Z C, Li D F, Zhu Z L, Tangwarodomnukun V, Tan D P 2019 Powder Technol. 360 462Google Scholar

    [31]

    Lu J F, Wang T, Li L, Yin Z C, Wang R H, Fan X H, Tan D P 2020 Processes 8 760Google Scholar

    [32]

    Tamburini A, Cipollina A, Micale G, Brucato A, Ciofalo M 2012 Chem. Eng. J. 193 234Google Scholar

    [33]

    Jahoda M, Tomaskova L, Mostek M 2009 Chem. Eng. Res. Des. 87 460Google Scholar

    [34]

    Wang J J, Han Y, Gu X P, Feng L F, Hu G H 2013 AIChE J. 59 1066Google Scholar

    [35]

    Xie L, Luo Z H 2017 Chem. Eng. Sci. 176 439Google Scholar

    [36]

    Jovanovic A, Pezo M, Pezo L, Levic L 2014 Powder Technol. 266 240Google Scholar

  • 图 1  VOF-DEM耦合计算流程图

    Fig. 1.  VOF-DEM coupling calculation flowchart.

    图 2  混合空间结构示意图

    Fig. 2.  Diagram of mixed space structure.

    图 3  网格划分 (a) 静子区域网格; (b) 转子区域网格; (c) 叶轮网格

    Fig. 3.  Grids division: (a) Grids of stator region; (b) grids of rotor region; (c) grids of impeller.

    图 4  四种网格尺寸在t = 5 s时的轴向速度分布

    Fig. 4.  Axial velocity distribution of four grid sizes at t = 5 s

    图 5  t = 5 s时四种充气条件下混合空间内的自由液面 (a) v = 0 m/s; (b) v = 0.01 m/s; (c) v = 0.05 m/s; (d) v = 1 m/s

    Fig. 5.  Free surface under four aeration conditions at t = 5 s: (a) v = 0 m/s; (b) v = 0.01 m/s; (c) v = 0.05 m/s; (d) v = 1 m/s.

    图 6  t = 5 s时, 四种充气条件下混合空间内z = 0.15 m高度截面的切向速度矢量图 (a) v = 0 m/s; (b) v = 0.01 m/s; (c) v = 0.05 m/s; (d) v = 1 m/s

    Fig. 6.  Tangential velocity vector in height z = 0.15 m under four aeration conditions at t = 5 s: (a) v = 0 m/s; (b) v = 0.01 m/s; (c) v = 0.05 m/s; (d) v = 1 m/s.

    图 7  径向位置r = 60 mm处的轴向高度速度分布 (a) 总速度; (b) 轴向速度; (c) 径向速度; (d) 切向速度

    Fig. 7.  Axial velocity distribution at radial position r = 60 mm: (a) Total velocity; (b) axial velocity; (c) radial velocity; (d) tangential velocity.

    图 8  v = 0 m/s时不同时刻的三相混合系统模拟结果

    Fig. 8.  Simulation results of three-phase stirred system at different time when v = 0 m/s.

    图 9  v = 0.01 m/s时不同时刻的三相混合系统模拟结果

    Fig. 9.  Simulation results of three-phase stirred system at different time when v = 0.01 m/s.

    图 10  v = 0.05 m/s时不同时刻的三相混合系统模拟结果

    Fig. 10.  Simulation results of three-phase stirred system at different time when v = 0.05 m/s.

    图 11  v = 1 m/s时不同时刻的三相混合系统模拟结果

    Fig. 11.  Simulation results of three-phase stirred system at different time when v = 1 m/s.

    图 12  不同充气工作条件下的RSD随时间的变化

    Fig. 12.  RSD changes with time under different aeration conditions.

    表 1  流体和颗粒特性设置

    Table 1.  Characteristics settings of fluid and particle.

    参数
    空气密度 ${\rho _{\rm{a}}}$/(${\rm{kg}} \cdot {{\rm{m}}^{{ - 3}}}$)1
    空气黏度 ${\mu _{\rm{a}}}$/(${\rm{Pa}} \cdot {\rm{s}}$)1 × 10–5
    水密度 ${\rho _{\rm{w}}}$/(${\rm{kg}} \cdot {{\rm{m}}^{{ - 3}}}$)1000
    水黏度 ${\mu _{\rm{w}}}$/(${\rm{Pa}} \cdot {\rm{s}}$)0.001
    颗粒密度 ${\rho _{\rm{p}}}$/(${\rm{kg}} \cdot {{\rm{m}}^{{ - 3}}}$)1100
    颗粒直径 ${d_{\rm{p}}}$/mm1
    颗粒数目 ${n_{\rm{p}}}$10000
    颗粒杨氏模量 ${Y_{\rm{P}}}$/${\rm{MPa}}$1
    颗粒泊松比 ${\nu _{\rm{P}}}$0.25
    壁面杨氏模量 ${Y_{\rm{w}}}$/${\rm{MPa}}$70000
    壁面泊松比 ${\nu _{\rm{w}}}$0.3
    滚动摩擦系数 ${\mu _{\rm{r}}}$0.01
    静摩擦系数 ${\mu _{\rm{s}}}$0.5
    恢复系数 ${e_{\rm{r}}}$0.5
    搅拌桨速度 $\omega $/(${\rm r} \cdot {\rm min }^{ - 1 }$)400
    CFD时间步 $\Delta {t_{\rm{CFD}}}$/${\rm{s}}$$2 \times {10^{ - 4}}$
    DEM时间步 $\Delta {t_{\rm{DEM}}}$/${\rm{s}}$$2 \times {10^{ - 5}}$
    耦合时间步 $\Delta {t_{{\rm{coupling}}}}$/${\rm{s}}$$2 \times {10^{ - 4}}$
    下载: 导出CSV
    Baidu
  • [1]

    Delvigne F, Destain J, Thonart P 2005 Chem. Eng. J. 113 1Google Scholar

    [2]

    Ge M, Ji S M, Tan D P, Cao H Q 2021 Int. J. Adv. Manuf. Tech. 114 3419Google Scholar

    [3]

    Hosseini S, Patel D, Ein-Mozaffari F, Mehrvar M 2010 Ind. Eng. Chem. Res. 49 4426Google Scholar

    [4]

    Wang S Y, Jiang X X, Wang R C, Wang X, Yang S W, Zhao J, Liu Y 2017 Adv. Powder Technol. 28 1611Google Scholar

    [5]

    Panneerselvam R, Savithri S, Surender G D 2009 Ind. Eng. Chem. Res. 48 1611Google Scholar

    [6]

    Li L, Tan D P, Yin Z C, Wang T, Fan X H, Wang R H 2021 Renew. Energy 175 887Google Scholar

    [7]

    Li L, Tan D P, Wang T, Yin Z C, Fan X H, Wang R H 2021 Energy 216 119136Google Scholar

    [8]

    Kasat G R, Khopkar A R, Ranade V V, Pandit A B 2008 Chem. Eng. Sci. 63 3877Google Scholar

    [9]

    Qi H, Qin S K, Cheng Z C, Teng Q, Hong T, Xie Y 2021 J. Manuf. Processes 64 585Google Scholar

    [10]

    Tan D P, Li L, Yin Z C, Li D F, Zhu Y L, Zheng S 2020 Int. J. Heat Mass Transfer 150 119250Google Scholar

    [11]

    Alexander S, Alexander D, Markku N, Jan M, Falah A, Maximilian V B, Jochen S, Bernd E 2019 Chem. Eng. Sci. 196 37Google Scholar

    [12]

    Musango L, John S, Lloyd M 2021 Powder Technol. 378 85Google Scholar

    [13]

    Li L, Lu J F, Fang H, Yin Z C, Wang T, Wang R H, Fan X H, Zhao L J, Tan D P, Wan Y H 2020 IEEE Access 8 27649Google Scholar

    [14]

    Han Y, Cundall P A 2013 Int. J. Numer. Anal. Methods Geomech. 37 10Google Scholar

    [15]

    Bastien D, Juliane R, Louis F, Francois B, Bruno B 2021 Chem. Eng. Sci. 230 116137Google Scholar

    [16]

    邵婷, 胡银玉, 王文坦, 金涌, 程易 2013 中国化学工程学报 21 1069Google Scholar

    Shao T, Hu Y Y, Wang W T, Jin Y, Cheng Y 2013 Chin. J. Chem. Eng. 21 1069Google Scholar

    [17]

    Blais B, Lassaigne M, Goniva C, Fradette L 2016 J. Comput. Phys. 318 201Google Scholar

    [18]

    Blais B, Bertrand F 2017 Chem. Eng. Res. Des. 118 270Google Scholar

    [19]

    Blais B, Bertrand O, Fradette L, Bertrand F 2017 Chem. Eng. Res. Des. 123 388Google Scholar

    [20]

    Xu W T, Tan Y B, Li M, Sun J L, Xie D, Liu Z 2020 Particuology 49 159Google Scholar

    [21]

    Sun X, Sakai M 2015 Chem. Eng. Sci. 134 531Google Scholar

    [22]

    Wu L, Gong M, Wang J T 2018 Ind. Eng. Chem. Res. 57 1714Google Scholar

    [23]

    Kang Q Q, He D P, Zhao N, Feng X, Wang J T 2019 Chem. Eng. J. 386 122846Google Scholar

    [24]

    谭大鹏, 杨涛, 赵军, 计时鸣 2016 65 054701Google Scholar

    Tan D P, Yang T, Zhao J, Ji S M 2016 Acta Phys. Sin. 65 054701Google Scholar

    [25]

    刘扬, 韩燕龙, 贾富国, 姚丽娜, 王会, 史宇菲 2015 64 114501Google Scholar

    Liu Y, Han Y L, Jia F G, Yao L N, Wang H, Shi Y F 2015 Acta Phys. Sin. 64 114501Google Scholar

    [26]

    Ergun S 1952 Chem. Eng. Prog. 48 89Google Scholar

    [27]

    Ji S M, Xiao F Q, Tan D P 2010 Sci. China Technol. Sc. 53 100Google Scholar

    [28]

    Saffman P G 1965 J. Fluid Mech. 22 385Google Scholar

    [29]

    Tan D P, Ji S M, Fu Y Z 2016 Int. J. Adv. Manuf. Technol. 85 1261Google Scholar

    [30]

    Li L, Qi H, Yin Z C, Li D F, Zhu Z L, Tangwarodomnukun V, Tan D P 2019 Powder Technol. 360 462Google Scholar

    [31]

    Lu J F, Wang T, Li L, Yin Z C, Wang R H, Fan X H, Tan D P 2020 Processes 8 760Google Scholar

    [32]

    Tamburini A, Cipollina A, Micale G, Brucato A, Ciofalo M 2012 Chem. Eng. J. 193 234Google Scholar

    [33]

    Jahoda M, Tomaskova L, Mostek M 2009 Chem. Eng. Res. Des. 87 460Google Scholar

    [34]

    Wang J J, Han Y, Gu X P, Feng L F, Hu G H 2013 AIChE J. 59 1066Google Scholar

    [35]

    Xie L, Luo Z H 2017 Chem. Eng. Sci. 176 439Google Scholar

    [36]

    Jovanovic A, Pezo M, Pezo L, Levic L 2014 Powder Technol. 266 240Google Scholar

  • [1] 刘程, 梁宏. 三相流体的轴对称格子 Boltzmann 模型及其在 Rayleigh-Plateau 不稳定性的应用.  , 2023, 72(4): 044701. doi: 10.7498/aps.72.20221967
    [2] 赵宁宁, 肖新宇, 凡凤仙, 苏明旭. 基于蒙特卡罗原理的混合颗粒三相体系声衰减计算模型研究.  , 2022, 71(7): 074303. doi: 10.7498/aps.71.20211869
    [3] 杨刚, 郑庭, 程启昊, 张会臣. 非牛顿流体剪切稀化特性的分子动力学模拟.  , 2021, 70(12): 124701. doi: 10.7498/aps.70.20202116
    [4] 徐晗, 张璐. 空间电荷层效应对固体氧化物燃料电池三相界面附近氧空位传输的影响.  , 2021, 70(12): 128801. doi: 10.7498/aps.70.20210012
    [5] 郑麟, 莫松平, 李玉秀, 陈颖, 徐进良. 薄层剪切二元颗粒分离过程动力学特性分析.  , 2019, 68(16): 164703. doi: 10.7498/aps.68.20190322
    [6] 唐瀚玉, 王娜, 吴学邦, 刘长松. 剪切振动下湿颗粒的力学谱.  , 2018, 67(20): 206402. doi: 10.7498/aps.67.20180966
    [7] 张大羽, 罗建军, 郑银环, 袁建平. 基于旋转场曲率的二维剪切梁单元建模.  , 2017, 66(11): 114501. doi: 10.7498/aps.66.114501
    [8] 颜细平, 彭政, 何菲菲, 蒋亦民. 类固态颗粒物质的剪切弹性行为测量.  , 2016, 65(12): 124501. doi: 10.7498/aps.65.124501
    [9] 张程宾, 于程, 刘向东, 金瓯, 陈永平. 剪切流场中双重乳液稳态形变.  , 2016, 65(20): 204704. doi: 10.7498/aps.65.204704
    [10] 高英俊, 全四龙, 邓芊芊, 罗志荣, 黄创高, 林葵. 剪切应变下刃型位错的滑移机理的晶体相场模拟.  , 2015, 64(10): 106104. doi: 10.7498/aps.64.106104
    [11] 曹山, 刘江平, 黎军, 王凯, 林伟, 雷海乐. 近三相点氮分子固体的低温红外吸收特性研究.  , 2015, 64(7): 073301. doi: 10.7498/aps.64.073301
    [12] 孟凡净, 刘焜. 密集剪切颗粒流中速度波动和自扩散特性的离散元模拟.  , 2014, 63(13): 134502. doi: 10.7498/aps.63.134502
    [13] 金叶青, 姚熊亮, 庞福振, 张阿漫. 均匀流中剪切变形加筋层合板声与振动特性研究.  , 2013, 62(13): 134306. doi: 10.7498/aps.62.134306
    [14] 赵俊英, 金宁德, 高忠科. 油气水三相流段塞流不稳定周期轨道探寻.  , 2013, 62(8): 084701. doi: 10.7498/aps.62.084701
    [15] 刘江平, 毕鹏, 雷海乐, 黎军, 韦建军. 近三相点温度低温固体氘的红外吸收谱.  , 2013, 62(16): 163301. doi: 10.7498/aps.62.163301
    [16] 蒋亦民, 刘佑. 水-气-颗粒固体三相混合系统的流体动力学.  , 2013, 62(20): 204501. doi: 10.7498/aps.62.204501
    [17] 毕忠伟, 孙其诚, 刘建国, 金峰, 张楚汉. 双轴压缩下颗粒物质剪切带的形成与发展.  , 2011, 60(3): 034502. doi: 10.7498/aps.60.034502
    [18] 王晓东, 欧阳洁, 苏进. 非均匀剪切流场中液晶聚合物微观结构的无网格模拟.  , 2010, 59(9): 6369-6376. doi: 10.7498/aps.59.6369
    [19] 施 展, 南策文. 铁电/铁磁三相颗粒复合材料的磁电性能计算.  , 2004, 53(8): 2766-2770. doi: 10.7498/aps.53.2766
    [20] 宋岩, 丁鄂江, 黄祖洽. 混合流体浸润相变的研究(Ⅱ)——二元系统的三相共存态.  , 1992, 41(6): 948-959. doi: 10.7498/aps.41.948
计量
  • 文章访问数:  10176
  • PDF下载量:  378
  • 被引次数: 0
出版历程
  • 收稿日期:  2020-12-14
  • 修回日期:  2021-01-06
  • 上网日期:  2021-06-05
  • 刊出日期:  2021-06-20

/

返回文章
返回
Baidu
map